| ID |
Date |
Author |
Project |
Subject |
Run Number |
Events |
XYPosition |
Cooling |
Data |
|
108
|
Sat Jun 13 19:29:50 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 030 | | 1 | No | Good |
room temp
FIRRun002,
PedestalRun012,
CalibrationRun003
wo L3 and L4
taget: bw, pos 1
|
|
107
|
Sat Jun 13 19:26:26 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 030 | | 3 | No | Good |
room temp
FIRRun002,
PedestalRun012,
CalibrationRun003
wo L3 and L4
taget: CE, pos 3
|
|
106
|
Sat Jun 13 19:14:41 2015 |
Benedikt Würkner | SVD3 (H6B) | L3 with FEI4 | 86 | 732000 | 3 | No | Good |
L3 sensor at position x: 115, y: 57 hitting apvs: 1&2 on p-side and apv 3&4 on n-side |
|
105
|
Sat Jun 13 18:02:04 2015 |
Benedikt Würkner | SVD3 (H6B) | L3 with FEI4 | 85 | 70000 | 2 | No | Good |
L3 sensor at position x: 115, y: 47 hitting apvs: 2&3 on p-side and apv 3&4 on n-side |
|
104
|
Sat Jun 13 17:05:35 2015 |
Benedikt Würkner | SVD3 (H6B) | L3 with FEI4 | 84 | 30000 | 1 | No | Good |
L3 sensor at position x: 105, y: 47 hitting apvs: 2&3 on p-side and apv 3 on n-side |
| Attachment 1: Telescope_with_L3.png
|
 |
|
103
|
Sat Jun 13 16:47:28 2015 |
Benedikt Würkner | SVD3 (H6B) | Mimosa threshold with FEI4 | 82 | 12000 | | No | Good |
Set mimosa threshold to 5 and recorded with FEI4 upstream
L3 already in sensor but not yet configured.
Probably to noisy to help much |
|
102
|
Sat Jun 13 13:01:39 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 029 | | 3 | No | Good |
room temp
FIRRun002,
PedestalRun012,
CalibrationRun003
L3 rotated.
taget: CE, pos 3
|
|
101
|
Sat Jun 13 10:07:36 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 028 | 50k | 4 | No | Good |
room temp
FIRRun002,
PedestalRun012,
CalibrationRun003
L3 rotated.
taget: FW, pos 4
|
|
100
|
Sat Jun 13 09:09:37 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 027 | ~200k | 2 | No | Good |
room temp
FIRRun002,
PedestalRun012,
CalibrationRun003
L3 rotated.
taget: CE, pos 1
|
|
99
|
Fri Jun 12 17:11:45 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 026 | 50k | 1 | No | Good |
room temp
FIRRun002,
PedestalRun012,
CalibrationRun003
L3 rotated.
taget: bw, pos 1
|
|
98
|
Fri Jun 12 17:08:23 2015 |
Benedikt Würkner | SVD3 (H6B) | Telescope with FEI4 | 80 | ~30k | | No | Good |
Threshold 6
Testrun to see how the telescope behaves without a DUT to test if there is an increased amount of multiple scattering after the aluminum planes of the FW and BW module.
This time with the upstream FEI4 plane |
|
97
|
Fri Jun 12 17:03:02 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 012 | 10000 | | No | Good |
room temp
FIRRun002
|
|
96
|
Fri Jun 12 17:00:18 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 011 | 10000 | | No | Good |
cooled pedestal vaules for long sixlet cal |
|
95
|
Fri Jun 12 16:52:52 2015 |
Benedikt Würkner | SVD3 (H6B) | Telescope without DUT | 76 | ~30k | | No | Good |
Threshold 6
Testrun to see how the telescope behaves without a DUT to test if there is an increased amount of multiple scattering after the aluminum planes of the FW and BW module.
|
| Attachment 1: Telescope_without_DUT.png
|
 |
|
94
|
Fri Jun 12 09:31:58 2015 |
Hao Yin | Belle II FADC (H6A) | FIR | 005 | | | Yes | Good |
FIR filer and ADC delay for long sixlet cal run. |
|
93
|
Thu Jun 11 18:37:11 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 025 | | 6 | Yes | Good |
temp: attachment (in 1st col, out 2nd col)
FIRRun002,
PedestalRun010,
Calibrationrun002
taget: ce, pos 3 |
| Attachment 1: pos3.PNG
|
 |
|
92
|
Thu Jun 11 18:01:54 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 024 | | 6 | Yes | Good |
temp: attachment (in 1st col, out 2nd col)
FIRRun002,
PedestalRun010,
Calibrationrun002
taget: -z, pos 6 |
| Attachment 1: Pos6.PNG
|
 |
|
91
|
Thu Jun 11 17:11:40 2015 |
Benedikt Würkner | SVD3 (H6B) | Hardware FEI4 | 74 | 20000 | 8 | No | Unknown |
RUN WITH SVD3, telescope and FEI4
EUDET Run 74
Mimosa Threshold 6
Pos 8: x=136.08 mm, y= 79 mm (narrow side center)
Upstream FEI4 used |
|
90
|
Thu Jun 11 16:38:17 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 023 | | 7 | Yes | Good |
temp: attachment (in 1st col, out 2nd col)
FIRRun002,
PedestalRun010,
Calibrationrun002
taget: CE, pos 7 |
| Attachment 1: Pos7.PNG
|
 |
|
89
|
Thu Jun 11 16:35:14 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 022 | | 5 | Yes | Good |
temp: in -23 out -20
FIRRun002,
PedestalRun010,
Calibrationrun002
taget: BW, pos 5 |