cooled until about 400k after that room temp
sixlet calibration run with only ladders
lvl = 0, 255
lat = 97
sam = 50
grp = 8
FIR filer and ADC delay for long sixlet cal run.
Testrun to see how the telescope behaves without a DUT to test if there is an increased amount of multiple scattering after the aluminum planes of the FW and BW module.
cooled pedestal vaules for long sixlet cal
This time with the upstream FEI4 plane
Set mimosa threshold to 5 and recorded with FEI4 upstream
L3 already in sensor but not yet configured.
Probably to noisy to help much