Fri Nov 21 18:23:05 2014, Axel König, common, New Table Calibration, , , , , Unknown
|
Nach powercut musste der Tisch neu kalibriert werden. Diese Neukalibration betrifft alle Messungen ab den ersten Messungen vom AIDA Stack. |
Fri Nov 21 18:35:17 2014, Axel König, AIDA, Important: Dockbox Inverter!, , , , , Unknown
|
Alle AIDA runs vor run_007 hatten kein Signal auf den Sensoren 5 und 6.
Grund: Inverter auf N Seite war im config file noch an (von Markus behoben).
Runs vor 007 können noch verwendet werden obwohl sensoren 5 und 6 negative Events lieferten (kommt aber auf das negative Limit an). |
Fri Nov 21 19:05:27 2014, Hao Yin, Belle SVD, FIRRun_004, , , Fri Nov 21 19:05:23 CET 2014, , Unknown
|
New ADC delay scan. cooled, -25 temperature
|
Fri Nov 21 19:10:09 2014, Hao Yin, Belle SVD, CalibrationRun_006, , , , , Unknown
|
cooled, latest ADC delay scan and FIRRun. |
Fri Nov 21 19:25:57 2014, Axel König, AIDA, hardware run, AIDA_run007, 26770, , , Unknown
|
AIDA
multi hit
Voltage=100V, I=5.4357uA
(new table calibration): V:71mm, H:65mm
config: L:\cern14\AIDA
data: L:\cern14\AIDA
EUDAQ File: Run000983
--Stopped 21.11 / 19:20--
DaqEvents: 26770 (-600 ped)
EUDAQ EVENTS: 26171 (+1 trigger offset) |
Fri Nov 21 19:42:36 2014, Hao Yin, , HardwareRun_033, , , , , Good
|
L6 are swapped, needs to be corrected later in the offline analysis.
cooled at -25
latest ADC delay and FIRRun
PedestalRun_012
CalibrationRun_006
100k trigger dead time
Need to change L6n apv definition to:
mod = 9,0,1,1,1,m,29,0,0,0,0,0,0,L6_n_side
apv = 9,1,34,3,30,x,0,0,5,1,7,0,0,x
apv = 9,0,36,3,50,x,0,0,5,1,6,0,0,x
apv = 9,3,38,3,30,x,0,0,5,1,9,0,0,x
apv = 9,2,40,3,30,x,0,0,5,1,8,0,0,x
to get the right mapping of the sensor. |
Fri Nov 21 22:08:32 2014, Hao Yin, , PedestalRun, 013, 10000, , , Unknown
|
correct mapping
cooled -25 °C
L3n deactivated
|
Fri Nov 21 23:33:54 2014, Axel König, AIDA, hardware run (PC crashed), AIDA_run008, ---, , , Unknown
|
22:00 SVD3 PC crashed!!! data will be collected. |
Fri Nov 21 23:34:36 2014, Axel König, AIDA, hardware run, AIDA_run009, 32902, , , Unknown
|
AIDA
multi hit
Voltage=100V, I=5.2190uA
(new table calibration): V:71mm, H:100mm
config: L:\cern14\AIDA
data: L:\cern14\AIDA
EUDAQ File: Run000983
--Stopped 21.11 / 19:20--
DaqEvents: 32902 (-600 ped)
EUDAQ EVENTS: DAQ events -600 (+1 trigger offset)
|
|
Fri Nov 21 23:40:10 2014, Axel König, AIDA, hardware run, AIDA_run010, 26329, , , Unknown
|
AIDA
multi hit
Voltage=100V, I=5.3470uA
(new table calibration): V:71mm, H:90mm
config: L:\cern14\AIDA
data: L:\cern14\AIDA
EUDAQ File: run000987
DaqEvents: 26329 (-600 ped)
EUDAQ EVENTS: DAQ events -600 (+1 trigger offset)
|
|
Sat Nov 22 00:11:36 2014, Axel König, AIDA, hardware run, AIDA_run011, 24916, , , Unknown
|
AIDA
multi hit
Voltage=100V, I=5.3470uA
(new table calibration): V:71mm, H:80mm
config: L:\cern14\AIDA
data: L:\cern14\AIDA
EUDAQ File: run000988
DaqEvents: 24916 (-600 ped)
EUDAQ EVENTS: DAQ events -600 (+1 trigger offset) |
Sat Nov 22 00:58:04 2014, Axel König, AIDA, hardware run, AIDA_run012, 276006, , , Unknown
|
AIDA
multi hit
Voltage=100V, I=5.3417uA
(new table calibration): V:51mm, H:70mm
config: L:\cern14\AIDA
data: L:\cern14\AIDA
EUDAQ File: run000989
DaqEvents: 276006 (-600 ped)
EUDAQ EVENTS: 275390 |
Sat Nov 22 07:56:33 2014, Axel König, AIDA, hardware run, AIDA_run013, 55629, , , Unknown
|
AIDA
multi hit
Voltage=100V, I=5.3417uA
(new table calibration): V:51mm, H:45mm
config: L:\cern14\AIDA
data: L:\cern14\AIDA
EUDAQ File: run000990
DaqEvents: 55629 (-600 ped)
EUDAQ EVENTS: 55003
|
|
Sat Nov 22 10:20:07 2014, Axel König, AIDA, calibration run, AIDA_calibration, , , , Unknown
|
Calibration run AIDA_calibration
L:\cern14\AIDA |
Sat Nov 22 11:16:26 2014, Markus Friedl, Belle SVD, cooling, , , , , Unknown
|
Cooling box plant hung up (I2C error on Alix, persistent after reboot)
Power-cycled cooling plant, now working
Slowly cooling down again |
Sat Nov 22 15:31:49 2014, Hao Yin, Belle SVD, HardwareRun, 038, 43788, 2014-11-22 15:18:40, , Unknown
|
Cooled down to -20
Bias voltage set to +-60V
Pedestal_013 (cooled)
Noisefile: HardwareRun_036.noi
Zero suppressed |
Sat Nov 22 16:04:05 2014, Axel König, Infineon, Infineon old calibration, Infineon_old_calibration, , , , Unknown
|
Calibration run
L:\cern14\infineon_old |
Sat Nov 22 16:43:18 2014, Axel König, common, table, telescope and dut geometry , , , , , Unknown
|
geometry files |
Sat Nov 22 16:53:39 2014, Axel König, Infineon, Infineon old, Infineon_old_run001, 55000 , , , Unknown
|
Infineon old
multi hit
Voltage=300V, I=10.9797uA
(new table calibration): V:81mm, H:97mm
config: L:\cern14\AIDA
data: L:\cern14\AIDA
EUDAQ File: run000992
DaqEvents: 55000 (-600 ped)
EUDAQ EVENTS: daq events - 600 (+2 offset) |
Sat Nov 22 17:00:43 2014, Axel König, Infineon, Infineon old, damaged strixel sensors, strange IV behaviour, , , , Unknown
|
1.) No events recorded for strixel sensors (run001). They seem to be damaged like they were at DESY.
2.) Very strange IV behaviour for every old Infineon module (especially TB12_baby1). |
|