Excellent, brilliant run.
Cooled see appendix
with new layout (l3_n-side channels changed and reactivated).
Latest FIRRun
New FIR run after reconecting to original setting.
cooled with new delay run
New ADC delay scan. cooled, -25 temperature
same as hardware run 009
FIFO FULL ERROR starting at ~event 5000
cooled see appendix (FirRun003)
PedestalRun_009
multi 6 Raw Mode
FIFO size increased
FIFO FULL at event ~27000
cooled see appendix (FirRun003) PedestalRun_010 multi 6 Raw Mode FIFO size increased L3n deactivated 100000 deadtime (CTRL TRG) Zero_suppressed
cooled see appendix (FirRun003) PedestalRun_010 multi 6 Raw Mode FIFO size increased L3n deactivated 100000 deadtime (CTRL TRG)
VME Error, overnight run
Not completely cooled since cooling failed at 1:42 in the night
Bias voltage set to +-60V
Some error with event no17 or 18 leading to the data not being easily analysable requiring a hack in TuxOA
Pedestal_013 (cooled)
Noisefile: HardwareRun_036.noi
Cooled down to -20
Zero suppressed
Bias voltage set to +-80V
Pedestal_015 (cooled)
"New" layout with no cooling (CO2 is no more)
Newly set values for APC Delay
New FIR Run 005
Temperature around 30 C
Bias: +-80V
Hardware Run +-40V Bias
Room Temperature
Pedestal 016
Zero Suppressed
Hardware Run +-30V Bias
Pedestal 017 (again marked all the bad strips)
Hardware Run +-50V Bias
Pedestal 018 (again marked all the bad strips)
Hardware run, hitting APVs 0/1 on p-sides, 1/2 on n-sides
EUDAT telescope running with difference of 2 events