| ID |
Date |
Author |
Project |
Subject |
Run Number |
Events |
StartTime |
EndTime |
|
132
|
Tue May 17 18:33:07 2011 |
Manfred Valentan | Micron Baby | GEW8, source run, unirrad, prezupf | run111 | 100k | 17.05.2011 18:01:41 | 17.05.2011 18:23:24 |
NOT usable as DUT
GEW8: B2Micron_2826_7_baby4 (combined p-stop)
config file: D:/cern10/micronbaby/data_lab/GEW8/prezupf/micronbaby_multi6.cfg
HV=+-50V
90Sr 1mCi ~centered
I_start=1.6µA
I_end=2.2µA
n-side: most of zones 1 and 3 unusable |
| Attachment 1: run111_all_hits_apv4.png
|
 |
| Attachment 2: run111_all_hits_apv5.png
|
 |
| Attachment 3: cal111_pednoise_apv4.png
|
 |
| Attachment 4: cal111_pednoise_apv5.png
|
 |
|
134
|
Tue May 17 18:53:33 2011 |
Manfred Valentan | Micron Baby | B2Micron_2826_7_baby3, source run, unirrad, prezupf | run112 | 100k | 17.05.2011 19:00:21 | 17.05.2011 19:22:45 |
DUT candidate atoll p-stop
B2Micron_2826_7_baby3 (atoll p-stop)
config file: D:/cern10/micronbaby/data_lab/7baby3/prezupf/micronbaby_multi6.cfg
HV=+-50V
90Sr 1mCi ~centered
I_start=1.4µA
I_end=1.8µA
n-side: looks very good except for a few strips in the middle of APV5 -> DUT candidate |
| Attachment 1: run112_all_hits_apv4.png
|
 |
| Attachment 2: run112_all_hits_apv5.png
|
 |
| Attachment 3: cal112_pednoise_apv4.png
|
 |
| Attachment 4: cal112_pednoise_apv5.png
|
 |
|
137
|
Wed May 18 10:38:07 2011 |
Manfred Valentan | Micron Baby | DUT3, source run, irrad, prezupf | run113 | 100k | 18.05.2011 10:03:15 | 18.05.2011 10:25:14 |
DUT3: B2Micron_2826_7_baby2 (common p-stop)
config file: D:/cern10/micronbaby/data_lab/DUT3/prezupf/micronbaby_single_irrad.cfg
HV=+-50V
90Sr 1mCi ~centered
I_start=20µA
I_end=26µA |
| Attachment 1: run113_all_hits_apv4.png
|
 |
| Attachment 2: run113_all_hits_apv5.png
|
 |
| Attachment 3: cal113_pednoise_apv4.png
|
 |
| Attachment 4: cal113_pednoise_apv5.png
|
 |
|
140
|
Wed May 18 14:42:49 2011 |
Manfred Valentan | Micron Baby | TRK6, source run, unirrad, postzupf | run115 | 100k | 18.05.2011 13:53:54 | 18.05.2011 13:53:54 |
TRK6: B2Micron_2826_1_baby4 (combined p-stop)
config file: D:/cern10/micronbaby/data_lab/TRK6/postzupfzupf/micronbaby_multi6_postzupf.cfg
HV=+-50V
90Sr 1mCi ~centered
I_start=1.7µA
I_end=1.8µA
Every second bond zupfed. However, there was a mistake and the first ~60 channels are shifted by 1, see attachment! |
| Attachment 1: cal115_goodstrips_apv4.png
|
 |
| Attachment 2: cal115_goodstrips_apv5.png
|
 |
| Attachment 3: run115_all_hits_apv4.png
|
 |
| Attachment 4: run115_all_hits_apv5.png
|
 |
| Attachment 5: cal115_pednoise_apv4.png
|
 |
| Attachment 6: cal115_pednoise_apv5.png
|
 |
|
142
|
Wed May 18 15:38:29 2011 |
Manfred Valentan | Micron Baby | TRK7, source run, unirrad, postzupf | run116 | 100k | 18.05.2011 15:02:05 | 18.05.2011 15:24:07 |
TRK7: B2Micron_2826_19_baby2 (common p-stop)
config file: D:/cern10/micronbaby/data_lab/TRK7/postzupf/micronbaby_multi6_postzupf.cfg
HV=+-50V
90Sr 1mCi ~centered
I_start=1.7µA
I_end=2.3µA
every second bond zupfed... |
| Attachment 1: cal116_goodstrips_apv4.png
|
 |
| Attachment 2: cal116_goodstrips_apv5.png
|
 |
| Attachment 3: run116_all_hits_apv4.png
|
 |
| Attachment 4: run116_all_hits_apv5.png
|
 |
| Attachment 5: cal116_pednoise_apv4.png
|
 |
| Attachment 6: cal116_pednoise_apv5.png
|
 |
|
144
|
Wed May 18 16:33:29 2011 |
Manfred Valentan | Micron Baby | B2Micron_2826_7_baby3, source run, unirrad, prezupf | run117 | 100k | 18.05.2011 15:59:39 | 18.05.2011 16:21:24 |
B2Micron_2826_7_baby3 (atoll p-stop)
config file: D:/cern10/micronbaby/data_lab/7baby3/postzupf/micronbaby_multi6_postzupf.cfg
HV=+-50V
90Sr 1mCi ~centered
I_start=1.3µA
I_end=1.7µA
Every second bond zupfed... |
| Attachment 1: cal117_goodstrips_apv04.png
|
 |
| Attachment 2: cal117_goodstrips_apv05.png
|
 |
| Attachment 3: run117_all_hits_apv4.png
|
 |
| Attachment 4: run117_all_hits_apv5.png
|
 |
| Attachment 5: cal117_pednoise_apv4.png
|
 |
| Attachment 6: cal117_pednoise_apv5.png
|
 |
|
146
|
Thu May 19 09:44:39 2011 |
Manfred Valentan | Micron Baby | DUT3, source run, irrad, postzupf | run118 | 100k | 19.05.2011 09:07:33 | 19.05.2011 09:27:21 |
DUT3: B2Micron_2826_7_baby2 (common p-stop)
config file: D:/cern10/micronbaby/data_lab/DUT3/postzupf/micronbaby_multi6_irrad_postzupf.cfg
HV=+-50V
90Sr 1mCi ~centered
I_start=18.0µA
I_end=22.6µA
Every second bond zupfed |
| Attachment 1: cal118_goodstrips_apv4.png
|
 |
| Attachment 2: cal118_goodstrips_apv5.png
|
 |
| Attachment 3: run118_all_hits_apv4.png
|
 |
| Attachment 4: run118_all_hits_apv5.png
|
 |
| Attachment 5: cal118_pednoise_apv4.png
|
 |
| Attachment 6: cal118_pednoise_apv5.png
|
 |
|
148
|
Thu May 19 11:04:04 2011 |
Manfred Valentan | Micron Baby | DUT4, source run, irrad, postzupf | run119 | 100k | 19.05.2011 10:08:14 | 19.05.2011 10:29:02 |
DUT4: B2Micron_2826_19_baby4 (combined p-stop)
config file: D:/cern10/micronbaby/data_lab/DUT4/postzupf/micronbaby_multi6_irrad_postzupf.cfg
HV=+-50V
90Sr 1mCi ~centered
I_start=141µA
I_end=167µA
Every second bond zupfed... |
| Attachment 1: cal119_goodstrips_apv4.png
|
 |
| Attachment 2: cal119_goodstrips_apv5.png
|
 |
| Attachment 3: run119_all_hits_apv4.png
|
 |
| Attachment 4: run119_all_hits_apv5.png
|
 |
| Attachment 5: cal119_pednoise_apv4.png
|
 |
| Attachment 6: cal119_pednoise_apv5.png
|
 |
|
149
|
Thu May 19 11:06:41 2011 |
Manfred Valentan | Micron Baby | DUT4, source run, irrad, prezupf | run114 | 100k | 18.05.2011 11:57:13 | 18.05.2011 12:13:12 |
DUT4: B2Micron_2826_19_baby4 (combined p-stop)
config file: D:/cern10/micronbaby/data_lab/DUT4/prezupf/micronbaby_multi6_irrad.cfg
HV=+-50V
90Sr 1mCi ~centered
I_start=118µA
I_end=168µA
keine hitmaps gespeichert... |
| Attachment 1: cal114_pednoise_apv4.png
|
 |
| Attachment 2: cal114_pednoise_apv5.png
|
 |
|
1
|
Wed Sep 15 10:25:13 2010 |
Marko Dragicevic | common | Equipment List | | | | |
Slow Control:
3x Source Measurement Unit Keithley K2410
-- Inv.Nr.: 540-702, 1000EUR
-- Inv.Nr.: 540-730, 1000EUR
-- Inv.Nr.: 540-709, 1000EUR
-- Koax-Kabel + Adapter auf Banane
Scanning Voltmeter Keithley K2700 , Inv.Nr.: 540-698, 1000EUR
-- Shunt-Widerstand-Platine
-- Flachbandkabel fuer Verbindung Shunt-Platine<->K2700
TRHX
-- 3 Sensoren
-- 2 lange Flachbandkabel, 1 serielles Kabel
LV-Power-Supplies, je 150EUR
-- GW Instek GPC-1850, SN.: 4080392
-- GW Instek GPC-1850D, Inv.Nr.: 545-059
-- GW Instek GPC-1850D, Inv.Nr.: 545-062
-- Systron Donner HR 20-10A, SN.: 781-092
-- Systron Donner HR 20-10A, SN.: 781-096
-- GW Instek GPS-3030D SN.: E871711
-- HAMEG MHP4030 SN.: 057910044 500EUR
Oszilloskop Tektronix TDS 3054, SN.: B011109, 2500EUR
-- 3 probes
Die Katze (Belle-HV-Supply)
-- 2x HV-Kabel 30m (rot/schwarz)
GBIP
USB Adapter NI GPIB-USB-HS, S/N 14693EB, 100EUR
-Kabel, 3x lang, 1x kurz
USB Temperaturlogger PicoTech TC-08, S/N.: VSR 08/519 100EUR
BELLE DAQ (CERN):
Chrisu-PC, Inv.Nr.: 401-925
-- Monitore
---- Belinea, Inv.Nr.: 401-696
---- Gericom, SN.: M1132GR5467345
-- Keyboard & Maus
Wiener 9U-VME-Crate, Inv.Nr.: 545-043, 2000EUR
-- Power Supply
-- VME-Controller
-- 4 VME-Module (1x Buffer, 1, Neco, 2x FADC)
DOCK-Box
-- Power Kabel
VME-Kabel (bockig) + Verlaengerung
30m-Kabel (8xCat7, 2xCat5, 2xgrau)
Lemo-Kabel
100pin-Flachkabel Neco-Buffer
Bananenkabel
Hybridkabel
Special TLU-Adapter (flipping pin order of RJ45)
Schrauben für Crate-Montage
Erdungskabel (liegen am CERN im Labor)
Magic Box
APVDAQ (Mol):
PC Inv.Nr: 401-943
-- Ilyama E2407, S/N 1105702000889
-- Keyboard & Maus
VME Crate Inv.Nr: 545-030
-- Create Controller Inv.Nr: 540-732
-- 3x APVDAQ
Repeater Board
-- 3x auf Platte montiert
Kabel
-- VME-Kabel (bockig)
-- 4x Netzwerk (gelb 1:1 verschalten)
-- 4x Netzwerk (grau 1:1 verschalten)
-- 1x Flachband
-- diverse Bananen
DUT:
Schraubenbox bau
-- diverse Schrauben
-- Gewindestangen
-- Fluegelmittern
-- 2x Sockel
4mm Steckschlauch fuer Trockenluft
Anschluss 1/8" auf 4mm Steckschlauch
Druckminderer
-- 6mm Snap-In
-- 6mm Schlauch
Chiller Huber ministat 230, Inv.Nr.: 482-021, 3000EUR
-- Manual
-- Netzteil
-- langes serielles Kabel
-- 5-6mm Schlauch
-- Adapter
-- 5 Liter dest. Wasser (falls noch Platz ist)
-- Frostschutz
-- LabView (falls ferngesteuert)
Box-Deckel
Baseplates (4?)
Schwarze Selbstklebefolie
Alufolie
GROSSES SCHWARZES LICHTDICHTES TUCH !!!!
Module
-- 2 x Micron Trapezoid
-- 2 x 6" Origami
-- 9 x Micron Baby
-- 2 x CNM 2D Sensoren
-- 8x SiLC (No. 0-7)
-- 2x Pt
EDV:
Netzwerk-Switch:
-- D-Link 8-Port GBit-Switch DGS1008D S/N F37v89B010104, 40 EUR
WLAN-Router: Linksys WRT54GL-DE, SN.: CL7B1H502248, 60 EUR
1TB externe Festplatte: Western Digital MyBook, SN.: WCAJ1469094, 40 EUR
-- Netzgeraet
-- USB-Kabel
-- Firewire 400/800 Kabel
Webcam
USB-Stick
Etikettiergeraet: Brother P-touch 1000
Laptops
-- Apple MacBook (MV) Inv.Nr.: 401-810
(-- Apple MacBook Pro (MD) Inv Nr.: 401-831)
2x USB-Seriell Adapter
Netzwerkkabel
1 Trommel Ethernet-Kabel (100m, vom Walzel)
einige RJ-45 Stecker
2.5" externe HD
CD/DVD Rohlinge
Tools:
Diverse Adaptoren Lemo-BNC, Lemo-Lemo
Taschenlampe + 2x Hirnbirn
Massband
Multimeter
Werkzeug (Schraubenzieher & Co)
Pinzetten
Laserpointer
Schwarze Fetzen
Gaffa
Doppelscotch
Kabelbinder
Druckluft zur Reinigung
Adapter f. Steckdosen
Verteiler-Leisten
Kabeltrommel
Schaltbare Steckerleisten
Tixo klein & gross
Loetstation Advanced JBC, SN.: 76841165, inkl. Zubehoer
Ethernet-Crimp-Zange
Eisensagl
Schublehre
Wasserwaage
Misc:
Fondueset 
Spiegelreflex Digitalkamera
-- Stativ
-- Reflexionszelt
Scheinwerfer
-- 3 x 500 W
-- 2 x Stativ
Akkus+Ladegerät
Dickes Logbook
Kugelschreiber/Bleistifte
Pflaster
Carnet ATA |
|
3
|
Thu Sep 23 15:32:28 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_7_Baby4 -> UNBRAUCHBAR | | | | |
p-side: Hybrid 42
APV2: viele gerissene bonds der inneren Bondreihe
APV3: gerissene bonds innen
n-side: Hybrid 32
APV4: 0-35 fail
APV5: 10-40, 68 fail
|
| Attachment 1: hardrun_2826_7_type4_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_2826_7_type4_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_2826_7_type4_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_2826_7_type4_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_2826_7_type4_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_2826_7_type4_pednoise_apv5.png
|
 |
|
4
|
Thu Sep 23 15:37:54 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_19_Baby4 -> TRACKING & best DUT candidate | | | | |
p-side: Hybrid 48
alles ok
n-side: Hybrid 35 (wurde repariert, nachdem ein paar bonds dran glauben mussten...)
APV4: 15-25 hoher noise, keine Fehler zu sehen -> Sensorfehler?
APV5: 127&128 kreuzen sich, beim Behebungsversuch mehr Schaden angerichtet -> besser mal die Finger davon lassen! |
| Attachment 1: hardrun_2826_19_type4_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_2826_19_type4_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_2826_19_type4_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_2826_19_type4_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_2826_19_type4_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_2826_19_type4_pednoise_apv5.png
|
 |
|
5
|
Thu Sep 23 15:54:20 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_19_Baby3 -> DUT & TRACKING | | | | |
p-side: Hybrid 47
alles ok
n-side: Hybrid 38
APV5: Streifen 127 hoher Noise
ALS DUT VERWENDEN!
|
| Attachment 1: hardrun_2826_19_type3_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_2826_19_type3_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_2826_19_type3_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_2826_19_type3_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_2826_19_type3_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_2826_19_type3_pednoise_apv5.png
|
 |
|
6
|
Thu Sep 23 16:00:31 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_19_Baby2 -> TRACKING | | | | |
p-side: Hybrid 46
alles ok
n-side: Hybrid 37
APV4: 70-75 schlecht, nix zu sehen -> Sensorfehler
APV5: 115-128 schlecht, rebond fail?
FUER TRACKING GEEIGNET!
|
| Attachment 1: hardrun_2826_19_type2_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_2826_19_type2_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_2826_19_type2_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_2826_19_type2_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_2826_19_type2_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_2826_19_type2_pednoise_apv5.png
|
 |
|
7
|
Thu Sep 23 16:01:10 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_7_Baby3 -> DUT | | | | |
p-side: Hybrid 40
APV3: letzte 10 Streifennicht gebondet, ging sich beim Prototyp-Modul an der Stelle nicht aus
n-side: Hybrid 30
APV5: 57-64 schlecht, rebond fail?
ALS DUT GEEIGNET!
|
| Attachment 1: hardrun_2826_7_type3_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_2826_7_type3_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_2826_7_type3_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_2826_7_type3_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_2826_7_type3_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_2826_7_type3_pednoise_apv5.png
|
 |
|
8
|
Thu Sep 23 16:12:54 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_7_Baby2 -> DUT & TRACKING | | | | |
p-side: Hybrid 41
alles ok
n-side: Hybrid 31
APV4: Streifen 0, 83 schlecht
APV5: Streifen 64, 88, 126 schlecht
ALS DUT GEEIGNET!
FUER TRACKING GEEIGNET! |
| Attachment 1: hardrun_single_2826_7_type2_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_single_2826_7_type2_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_single_2826_7_type2_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_single_2826_7_type2_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_single_2826_7_type2_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_single_2826_7_type2_pednoise_apv5.png
|
 |
|
9
|
Thu Sep 23 16:19:54 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_1_Baby4, DUT EINGESCHRAENKT, TRACKING | | | | |
p-side: Hybrid 45
APV0: beide Randstreifen schlecht
APV1: Streifen 0 schlecht
APV3: beide Randstreifen etwas schlechter, nicht schlimm
n-side: Hybrid 36
APV4: 0, 9, 40, 79-85, 97, 102, 124 Sensorfehler?
APV5: 0-30 vereinzelt schlechte Streifen, 115-128 Bonds beruehren
ALS DUT AUGENZUDRUECKEN GEEIGNET!
FUER TRACKING GEEIGNET!
|
| Attachment 1: hardrun_single_2826_1_type4_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_single_2826_1_type4_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_single_2826_1_type4_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_single_2826_1_type4_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_single_2826_1_type4_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_single_2826_1_type4_pednoise_apv5.png
|
 |
|
10
|
Thu Sep 23 16:22:33 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_1_Baby3, TRACKING | | | | |
p-side: Hybrid 44
alles ok
n-side: Hybrid 34
APV4: zur Gaenze schlecht, APV-Fehler?
APV5: beide Randstreifen schlecht
FUER TRACKING GEEIGNET!
|
| Attachment 1: hardrun_single_2826_1_type3_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_single_2826_1_type3_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_single_2826_1_type3_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_single_2826_1_type3_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_single_2826_1_type3_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_single_2826_1_type3_pednoise_apv5.png
|
 |
|
11
|
Thu Sep 23 16:23:07 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_1_Baby2, DUT (eingeschraenkt) & TRACKING | | | | |
p-side: Hybrid 43
APV3: Streifen 9 schlecht
n-side: Hybrid 33
APV4: 0-10 andere Bond-Parameter?, 28&29 erhoehtes noise
APV5: 111-128: 4 schlechte Streifen + common mode correction?
ALS DUT GEEIGNET!
FUER TRACKING GEEIGNET!
|
| Attachment 1: hardrun_2826_1_type2_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_2826_1_type2_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_2826_1_type2_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_2826_1_type2_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_2826_1_type2_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_2826_1_type2_pednoise_apv5.png
|
 |
|
12
|
Fri Sep 24 12:09:32 2010 |
Manfred Valentan | BELLE | gds-file of Micron wafer | | | | |
|
| Attachment 1: WaferMicron30.gds
|
| Attachment 2: DSSD_layerproperties.lyp
|
<?xml version="1.0"?>
<layer-properties>
<properties>
<frame-color>#000000</frame-color>
<fill-color>#000000</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I9</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>0/0@1 Mask dimensions</name>
<source>0/0@1</source>
</properties>
<properties>
<frame-color/>
<fill-color/>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern/>
<visible>true</visible>
<transparent>false</transparent>
<width>0</width>
<marked>false</marked>
<animation>0</animation>
<name>p-side (junction)</name>
<source>*/*@*</source>
<group-members>
<frame-color>#01ff6b</frame-color>
<fill-color>#01ff6b</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I9</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>1/0@1 N+</name>
<source>1/0@1</source>
</group-members>
<group-members>
<frame-color>#ff0000</frame-color>
<fill-color>#ff0000</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I9</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>2/0@1 P+</name>
<source>2/0@1</source>
</group-members>
<group-members>
<frame-color>#ff8000</frame-color>
<fill-color>#ff8000</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I9</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>3/0@1 Via</name>
<source>3/0@1</source>
</group-members>
<group-members>
<frame-color>#000080</frame-color>
<fill-color>#000080</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I9</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>4/0@1 Metal</name>
<source>4/0@1</source>
</group-members>
<group-members>
<frame-color>#800080</frame-color>
<fill-color>#800080</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I9</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>5/0@1 Passivation</name>
<source>5/0@1</source>
</group-members>
<group-members>
<frame-color>#91ff00</frame-color>
<fill-color>#91ff00</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I9</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>6/0@1 Polysilicon</name>
<source>6/0@1</source>
</group-members>
<group-members>
<frame-color>#008000</frame-color>
<fill-color>#008000</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I9</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>7/0@1 Polysilicon Head</name>
<source>7/0@1</source>
</group-members>
<group-members>
<frame-color>#ff8000</frame-color>
<fill-color>#ff8000</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I9</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>8/0@1 Via Edge Ring</name>
<source>8/0@1</source>
</group-members>
</properties>
<properties>
<frame-color/>
<fill-color/>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern/>
<visible>true</visible>
<transparent>false</transparent>
<width>0</width>
<marked>false</marked>
<animation>0</animation>
<name>n-side (ohmic)</name>
<source>*/*@*</source>
<group-members>
<frame-color>#01ff6b</frame-color>
<fill-color>#01ff6b</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I5</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>21/0@1 N+ Back</name>
<source>21/0@1</source>
</group-members>
<group-members>
<frame-color>#ff0000</frame-color>
<fill-color>#ff0000</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I5</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>22/0@1 P+ Back</name>
<source>22/0@1</source>
</group-members>
<group-members>
<frame-color>#ff8000</frame-color>
<fill-color>#ff8000</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I5</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>23/0@1 Via Back</name>
<source>23/0@1</source>
</group-members>
<group-members>
<frame-color>#0000ff</frame-color>
<fill-color>#0000ff</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I5</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>24/0@1 Metal Back</name>
<source>24/0@1</source>
</group-members>
<group-members>
<frame-color>#800080</frame-color>
<fill-color>#800080</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I5</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>25/0@1 Passivation Back</name>
<source>25/0@1</source>
</group-members>
<group-members>
<frame-color>#91ff00</frame-color>
<fill-color>#91ff00</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I5</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>26/0@1 Polysilicon Back</name>
<source>26/0@1</source>
</group-members>
<group-members>
<frame-color>#008000</frame-color>
<fill-color>#008000</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I5</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>27/0@1 Polysilicon Head Back</name>
<source>27/0@1</source>
</group-members>
<group-members>
<frame-color>#ff8000</frame-color>
<fill-color>#ff8000</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I5</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>28/0@1 Via Edge Ring Back</name>
<source>28/0@1</source>
</group-members>
</properties>
<properties>
<frame-color>#000000</frame-color>
<fill-color>#000000</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I9</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>100/0@1 Wafer Dimensions</name>
<source>100/0@1</source>
</properties>
</layer-properties>
|