Status of config files as of Friday 14 August 2009 late evening
cern09_ite128_multi6
cern09_pt_ite512_single1
cern09_pt_ite512_multi6
cern09_alignment_beam_single1
cern09_alignment_beam_multi6
cern09_belle_single
cern09_belle_multi6
ssh eudet@eudetmac001.cern.ch ssh tlupc ~\eudaq\bin\TLUControl.exe -d1 -a12
-t100 internal trigger -aXX Mask for Szintis: 1 4 mm (front) 2 4 mm (front) 4 9 mm (back) 8 9 mm (back)
Hostname: DAQPCHEPHY.CERN.CH
Hostname: XYPCEUDET.CERN.CH
Hostname: cwo-hna453-h6b1.cern.ch 137.138.61.206
vnc eudetmac001.cern.ch Cycle Run: o) stop DAQ o) kill eudaq Run Control o) restart: ./STARTRUN.FORTIS.1 o) load config: testfortis_with_eudrb_beam_backpressure_WITH_SILC o) press: Config (wait ~1 min.) o) press: Start
Georg #70
Wolfgang - Building: 41, Room: 204, Tel: ?
Manfred: Building 38, Room 522, Tel: 70522
Chrisu: B39, room 309, Tel: 79309
Bergi: Tel Zimmer: 79112, Handy: 16-2471
Maks: Tel Zimmer: 79117
manually changed TRIM3, TRIM4 and TRIM6
Kendall tau (rank correlation) for module 1 (single layer 1 / h13), module 2 (single layer 2 / h14), module 6 (standard sensor 2 / h12)