| ID |
Date |
Author |
Subject |
Run Number |
DUT |
Fluence |
Beam Energy |
Data |
t-Start |
t-Stop |
Duration_min |
|
192
|
Wed Apr 24 12:49:44 2024 |
tb-crew | HV scan | 179 | Wxxx topside | unirradiated | 4.2 | Unknown | 24.04.2024 12:29:58 | 24.04.2024 12:50:02 | 20 |
automatic log for run 179
Comment:
running HV scan |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = .92
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: default_5.conf
|
Name = /home/silicon/RD50-MPW4/tb_desy_apr24/mpw4.conf
[DataCollector.mpw4_dc]
DISABLE_PRINT = 1
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_MN = mpw4_mon
XILINX_IP = 192.168.201.1
[DataCollector.tel_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/adenium/adenium_run$6R$X
[DataCollector.tlu_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/tlu/tlu_run$6R$X
[LogCollector.log]
[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
[Producer.MuPix8]
#EUDAQ_DC = tel_dc
#lazyFrog = -25
#register_value = 0
ThPix = 144
[Producer.RD50_MPW4_0]
voltage_key = th
voltage_value = 0.92
[Producer.aida_tlu]
# Clock source (0 = no clock, 1= Si5345, 2= FPGA)
# Generate internal triggers (in Hz, 0 = no triggers)
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
#DUTMask = 0x3
#DUTMaskModeModifier = 0x30
#PMT1_V = 0.8
#PMT2_V = 0.85
#PMT3_V = 0.8
#PMT4_V = 0.0
#trigMaskLo = 0x00000040
DACThreshold0 = +0.3
DACThreshold1 = -0.04
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12
DACThreshold5 = -0.12
DUTIgnoreBusy = 0x0
DUTIgnoreShutterVeto = 0x0
DUTMask = 0xD
DUTMaskMode = 0xF1
EUDAQ_DC = tlu_dc
EnableRecordData = 1
EnableShutterMode = 0x0
FileComment = mpw3
HDMI1_clk = 1
HDMI1_set = 0x7
HDMI2_clk = 1
HDMI2_set = 0x7
HDMI3_clk = 1
HDMI3_set = 0x7
HDMI4_clk = 1
HDMI4_set = 0x7
InternalShutterInterval = 0
InternalTriggerFreq = 0
LEMOclk = 0
MinSpillTimeOnins = 4.5
MinSpilldownTimeins = 0.5
PlotWindowSizeinns = 40e9
ShutterOffTime = 200000000
ShutterOnTime = 0
ShutterSource = 5
ShutterVetoOffTime = 0
ThreshEvBegin = 1
ThreshEvEnd = 1
ThreshPartBegin = 1
ThreshPartEnd = 1
confid = 20201311
delayStart = 200
in0_DEL = 0
in0_STR = 0x3F
in1_DEL = 0
in1_STR = 1
in2_DEL = 0
in2_STR = 0x3F
in3_DEL = 0
in3_STR = 1
in4_DEL = 0
in4_STR = 0
in5_DEL = 0
in5_STR = 0
skipconf = 0
trigMaskHi = 0x00000000
trigMaskLo = 0x00000002
trigPol = 0x3E
verbose = 1
[Producer.altel]
EUDAQ_DC = tel_dc
EUDAQ_ID = 1
[Producer.elog1]
files2log = "peary_config.cfg, matrix_mpw4.txt"
start_cmd = "./get_mpw4_configs.sh"
[Producer.keithleyPS]
max_current = 5e-6
voltage = -115
[RunControl]
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
|
|
193
|
Wed Apr 24 13:10:24 2024 |
tb-crew | HV scan | 180 | Wxxx topside | unirradiated | 4.2 | Unknown | 24.04.2024 12:50:38 | 24.04.2024 13:10:42 | 20 |
automatic log for run 180
Comment:
running HV scan |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = .92
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: default_6.conf
|
Name = /home/silicon/RD50-MPW4/tb_desy_apr24/mpw4.conf
[DataCollector.mpw4_dc]
DISABLE_PRINT = 1
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_MN = mpw4_mon
XILINX_IP = 192.168.201.1
[DataCollector.tel_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/adenium/adenium_run$6R$X
[DataCollector.tlu_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/tlu/tlu_run$6R$X
[LogCollector.log]
[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
[Producer.MuPix8]
#EUDAQ_DC = tel_dc
#lazyFrog = -25
#register_value = 0
ThPix = 144
[Producer.RD50_MPW4_0]
voltage_key = th
voltage_value = 0.92
[Producer.aida_tlu]
# Clock source (0 = no clock, 1= Si5345, 2= FPGA)
# Generate internal triggers (in Hz, 0 = no triggers)
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
#DUTMask = 0x3
#DUTMaskModeModifier = 0x30
#PMT1_V = 0.8
#PMT2_V = 0.85
#PMT3_V = 0.8
#PMT4_V = 0.0
#trigMaskLo = 0x00000040
DACThreshold0 = +0.3
DACThreshold1 = -0.04
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12
DACThreshold5 = -0.12
DUTIgnoreBusy = 0x0
DUTIgnoreShutterVeto = 0x0
DUTMask = 0xD
DUTMaskMode = 0xF1
EUDAQ_DC = tlu_dc
EnableRecordData = 1
EnableShutterMode = 0x0
FileComment = mpw3
HDMI1_clk = 1
HDMI1_set = 0x7
HDMI2_clk = 1
HDMI2_set = 0x7
HDMI3_clk = 1
HDMI3_set = 0x7
HDMI4_clk = 1
HDMI4_set = 0x7
InternalShutterInterval = 0
InternalTriggerFreq = 0
LEMOclk = 0
MinSpillTimeOnins = 4.5
MinSpilldownTimeins = 0.5
PlotWindowSizeinns = 40e9
ShutterOffTime = 200000000
ShutterOnTime = 0
ShutterSource = 5
ShutterVetoOffTime = 0
ThreshEvBegin = 1
ThreshEvEnd = 1
ThreshPartBegin = 1
ThreshPartEnd = 1
confid = 20201311
delayStart = 200
in0_DEL = 0
in0_STR = 0x3F
in1_DEL = 0
in1_STR = 1
in2_DEL = 0
in2_STR = 0x3F
in3_DEL = 0
in3_STR = 1
in4_DEL = 0
in4_STR = 0
in5_DEL = 0
in5_STR = 0
skipconf = 0
trigMaskHi = 0x00000000
trigMaskLo = 0x00000002
trigPol = 0x3E
verbose = 1
[Producer.altel]
EUDAQ_DC = tel_dc
EUDAQ_ID = 1
[Producer.elog1]
files2log = "peary_config.cfg, matrix_mpw4.txt"
start_cmd = "./get_mpw4_configs.sh"
[Producer.keithleyPS]
max_current = 5e-6
voltage = -100
[RunControl]
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
|
|
194
|
Wed Apr 24 13:31:03 2024 |
tb-crew | HV scan | 181 | Wxxx topside | unirradiated | 4.2 | Unknown | 24.04.2024 13:11:17 | 24.04.2024 13:31:21 | 20 |
automatic log for run 181
Comment:
running HV scan |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = .92
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: default_7.conf
|
Name = /home/silicon/RD50-MPW4/tb_desy_apr24/mpw4.conf
[DataCollector.mpw4_dc]
DISABLE_PRINT = 1
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_MN = mpw4_mon
XILINX_IP = 192.168.201.1
[DataCollector.tel_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/adenium/adenium_run$6R$X
[DataCollector.tlu_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/tlu/tlu_run$6R$X
[LogCollector.log]
[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
[Producer.MuPix8]
#EUDAQ_DC = tel_dc
#lazyFrog = -25
#register_value = 0
ThPix = 144
[Producer.RD50_MPW4_0]
voltage_key = th
voltage_value = 0.92
[Producer.aida_tlu]
# Clock source (0 = no clock, 1= Si5345, 2= FPGA)
# Generate internal triggers (in Hz, 0 = no triggers)
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
#DUTMask = 0x3
#DUTMaskModeModifier = 0x30
#PMT1_V = 0.8
#PMT2_V = 0.85
#PMT3_V = 0.8
#PMT4_V = 0.0
#trigMaskLo = 0x00000040
DACThreshold0 = +0.3
DACThreshold1 = -0.04
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12
DACThreshold5 = -0.12
DUTIgnoreBusy = 0x0
DUTIgnoreShutterVeto = 0x0
DUTMask = 0xD
DUTMaskMode = 0xF1
EUDAQ_DC = tlu_dc
EnableRecordData = 1
EnableShutterMode = 0x0
FileComment = mpw3
HDMI1_clk = 1
HDMI1_set = 0x7
HDMI2_clk = 1
HDMI2_set = 0x7
HDMI3_clk = 1
HDMI3_set = 0x7
HDMI4_clk = 1
HDMI4_set = 0x7
InternalShutterInterval = 0
InternalTriggerFreq = 0
LEMOclk = 0
MinSpillTimeOnins = 4.5
MinSpilldownTimeins = 0.5
PlotWindowSizeinns = 40e9
ShutterOffTime = 200000000
ShutterOnTime = 0
ShutterSource = 5
ShutterVetoOffTime = 0
ThreshEvBegin = 1
ThreshEvEnd = 1
ThreshPartBegin = 1
ThreshPartEnd = 1
confid = 20201311
delayStart = 200
in0_DEL = 0
in0_STR = 0x3F
in1_DEL = 0
in1_STR = 1
in2_DEL = 0
in2_STR = 0x3F
in3_DEL = 0
in3_STR = 1
in4_DEL = 0
in4_STR = 0
in5_DEL = 0
in5_STR = 0
skipconf = 0
trigMaskHi = 0x00000000
trigMaskLo = 0x00000002
trigPol = 0x3E
verbose = 1
[Producer.altel]
EUDAQ_DC = tel_dc
EUDAQ_ID = 1
[Producer.elog1]
files2log = "peary_config.cfg, matrix_mpw4.txt"
start_cmd = "./get_mpw4_configs.sh"
[Producer.keithleyPS]
max_current = 5e-6
voltage = -85
[RunControl]
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
|
|
195
|
Wed Apr 24 13:51:42 2024 |
tb-crew | HV scan | 182 | Wxxx topside | unirradiated | 4.2 | Unknown | 24.04.2024 13:31:56 | 24.04.2024 13:52:00 | 20 |
automatic log for run 182
Comment:
running HV scan |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = .92
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: default_8.conf
|
Name = /home/silicon/RD50-MPW4/tb_desy_apr24/mpw4.conf
[DataCollector.mpw4_dc]
DISABLE_PRINT = 1
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_MN = mpw4_mon
XILINX_IP = 192.168.201.1
[DataCollector.tel_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/adenium/adenium_run$6R$X
[DataCollector.tlu_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/tlu/tlu_run$6R$X
[LogCollector.log]
[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
[Producer.MuPix8]
#EUDAQ_DC = tel_dc
#lazyFrog = -25
#register_value = 0
ThPix = 144
[Producer.RD50_MPW4_0]
voltage_key = th
voltage_value = 0.92
[Producer.aida_tlu]
# Clock source (0 = no clock, 1= Si5345, 2= FPGA)
# Generate internal triggers (in Hz, 0 = no triggers)
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
#DUTMask = 0x3
#DUTMaskModeModifier = 0x30
#PMT1_V = 0.8
#PMT2_V = 0.85
#PMT3_V = 0.8
#PMT4_V = 0.0
#trigMaskLo = 0x00000040
DACThreshold0 = +0.3
DACThreshold1 = -0.04
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12
DACThreshold5 = -0.12
DUTIgnoreBusy = 0x0
DUTIgnoreShutterVeto = 0x0
DUTMask = 0xD
DUTMaskMode = 0xF1
EUDAQ_DC = tlu_dc
EnableRecordData = 1
EnableShutterMode = 0x0
FileComment = mpw3
HDMI1_clk = 1
HDMI1_set = 0x7
HDMI2_clk = 1
HDMI2_set = 0x7
HDMI3_clk = 1
HDMI3_set = 0x7
HDMI4_clk = 1
HDMI4_set = 0x7
InternalShutterInterval = 0
InternalTriggerFreq = 0
LEMOclk = 0
MinSpillTimeOnins = 4.5
MinSpilldownTimeins = 0.5
PlotWindowSizeinns = 40e9
ShutterOffTime = 200000000
ShutterOnTime = 0
ShutterSource = 5
ShutterVetoOffTime = 0
ThreshEvBegin = 1
ThreshEvEnd = 1
ThreshPartBegin = 1
ThreshPartEnd = 1
confid = 20201311
delayStart = 200
in0_DEL = 0
in0_STR = 0x3F
in1_DEL = 0
in1_STR = 1
in2_DEL = 0
in2_STR = 0x3F
in3_DEL = 0
in3_STR = 1
in4_DEL = 0
in4_STR = 0
in5_DEL = 0
in5_STR = 0
skipconf = 0
trigMaskHi = 0x00000000
trigMaskLo = 0x00000002
trigPol = 0x3E
verbose = 1
[Producer.altel]
EUDAQ_DC = tel_dc
EUDAQ_ID = 1
[Producer.elog1]
files2log = "peary_config.cfg, matrix_mpw4.txt"
start_cmd = "./get_mpw4_configs.sh"
[Producer.keithleyPS]
max_current = 5e-6
voltage = -70
[RunControl]
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
|
|
196
|
Wed Apr 24 14:12:21 2024 |
tb-crew | HV scan | 183 | Wxxx topside | unirradiated | 4.2 | Unknown | 24.04.2024 13:52:35 | 24.04.2024 14:12:39 | 20 |
automatic log for run 183
Comment:
running HV scan |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = .92
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: default_9.conf
|
Name = /home/silicon/RD50-MPW4/tb_desy_apr24/mpw4.conf
[DataCollector.mpw4_dc]
DISABLE_PRINT = 1
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_MN = mpw4_mon
XILINX_IP = 192.168.201.1
[DataCollector.tel_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/adenium/adenium_run$6R$X
[DataCollector.tlu_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/tlu/tlu_run$6R$X
[LogCollector.log]
[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
[Producer.MuPix8]
#EUDAQ_DC = tel_dc
#lazyFrog = -25
#register_value = 0
ThPix = 144
[Producer.RD50_MPW4_0]
voltage_key = th
voltage_value = 0.92
[Producer.aida_tlu]
# Clock source (0 = no clock, 1= Si5345, 2= FPGA)
# Generate internal triggers (in Hz, 0 = no triggers)
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
#DUTMask = 0x3
#DUTMaskModeModifier = 0x30
#PMT1_V = 0.8
#PMT2_V = 0.85
#PMT3_V = 0.8
#PMT4_V = 0.0
#trigMaskLo = 0x00000040
DACThreshold0 = +0.3
DACThreshold1 = -0.04
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12
DACThreshold5 = -0.12
DUTIgnoreBusy = 0x0
DUTIgnoreShutterVeto = 0x0
DUTMask = 0xD
DUTMaskMode = 0xF1
EUDAQ_DC = tlu_dc
EnableRecordData = 1
EnableShutterMode = 0x0
FileComment = mpw3
HDMI1_clk = 1
HDMI1_set = 0x7
HDMI2_clk = 1
HDMI2_set = 0x7
HDMI3_clk = 1
HDMI3_set = 0x7
HDMI4_clk = 1
HDMI4_set = 0x7
InternalShutterInterval = 0
InternalTriggerFreq = 0
LEMOclk = 0
MinSpillTimeOnins = 4.5
MinSpilldownTimeins = 0.5
PlotWindowSizeinns = 40e9
ShutterOffTime = 200000000
ShutterOnTime = 0
ShutterSource = 5
ShutterVetoOffTime = 0
ThreshEvBegin = 1
ThreshEvEnd = 1
ThreshPartBegin = 1
ThreshPartEnd = 1
confid = 20201311
delayStart = 200
in0_DEL = 0
in0_STR = 0x3F
in1_DEL = 0
in1_STR = 1
in2_DEL = 0
in2_STR = 0x3F
in3_DEL = 0
in3_STR = 1
in4_DEL = 0
in4_STR = 0
in5_DEL = 0
in5_STR = 0
skipconf = 0
trigMaskHi = 0x00000000
trigMaskLo = 0x00000002
trigPol = 0x3E
verbose = 1
[Producer.altel]
EUDAQ_DC = tel_dc
EUDAQ_ID = 1
[Producer.elog1]
files2log = "peary_config.cfg, matrix_mpw4.txt"
start_cmd = "./get_mpw4_configs.sh"
[Producer.keithleyPS]
max_current = 5e-6
voltage = -55
[RunControl]
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
|
|
197
|
Wed Apr 24 14:33:01 2024 |
tb-crew | HV scan | 184 | Wxxx topside | unirradiated | 4.2 | Unknown | 24.04.2024 14:13:15 | 24.04.2024 14:33:19 | 20 |
automatic log for run 184
Comment:
running HV scan |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = .92
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: default_10.conf
|
Name = /home/silicon/RD50-MPW4/tb_desy_apr24/mpw4.conf
[DataCollector.mpw4_dc]
DISABLE_PRINT = 1
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_MN = mpw4_mon
XILINX_IP = 192.168.201.1
[DataCollector.tel_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/adenium/adenium_run$6R$X
[DataCollector.tlu_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/tlu/tlu_run$6R$X
[LogCollector.log]
[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
[Producer.MuPix8]
#EUDAQ_DC = tel_dc
#lazyFrog = -25
#register_value = 0
ThPix = 144
[Producer.RD50_MPW4_0]
voltage_key = th
voltage_value = 0.92
[Producer.aida_tlu]
# Clock source (0 = no clock, 1= Si5345, 2= FPGA)
# Generate internal triggers (in Hz, 0 = no triggers)
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
#DUTMask = 0x3
#DUTMaskModeModifier = 0x30
#PMT1_V = 0.8
#PMT2_V = 0.85
#PMT3_V = 0.8
#PMT4_V = 0.0
#trigMaskLo = 0x00000040
DACThreshold0 = +0.3
DACThreshold1 = -0.04
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12
DACThreshold5 = -0.12
DUTIgnoreBusy = 0x0
DUTIgnoreShutterVeto = 0x0
DUTMask = 0xD
DUTMaskMode = 0xF1
EUDAQ_DC = tlu_dc
EnableRecordData = 1
EnableShutterMode = 0x0
FileComment = mpw3
HDMI1_clk = 1
HDMI1_set = 0x7
HDMI2_clk = 1
HDMI2_set = 0x7
HDMI3_clk = 1
HDMI3_set = 0x7
HDMI4_clk = 1
HDMI4_set = 0x7
InternalShutterInterval = 0
InternalTriggerFreq = 0
LEMOclk = 0
MinSpillTimeOnins = 4.5
MinSpilldownTimeins = 0.5
PlotWindowSizeinns = 40e9
ShutterOffTime = 200000000
ShutterOnTime = 0
ShutterSource = 5
ShutterVetoOffTime = 0
ThreshEvBegin = 1
ThreshEvEnd = 1
ThreshPartBegin = 1
ThreshPartEnd = 1
confid = 20201311
delayStart = 200
in0_DEL = 0
in0_STR = 0x3F
in1_DEL = 0
in1_STR = 1
in2_DEL = 0
in2_STR = 0x3F
in3_DEL = 0
in3_STR = 1
in4_DEL = 0
in4_STR = 0
in5_DEL = 0
in5_STR = 0
skipconf = 0
trigMaskHi = 0x00000000
trigMaskLo = 0x00000002
trigPol = 0x3E
verbose = 1
[Producer.altel]
EUDAQ_DC = tel_dc
EUDAQ_ID = 1
[Producer.elog1]
files2log = "peary_config.cfg, matrix_mpw4.txt"
start_cmd = "./get_mpw4_configs.sh"
[Producer.keithleyPS]
max_current = 5e-6
voltage = -40
[RunControl]
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
|
|
198
|
Wed Apr 24 14:53:39 2024 |
tb-crew | HV scan | 185 | Wxxx topside | unirradiated | 4.2 | Unknown | 24.04.2024 14:33:54 | 24.04.2024 14:53:57 | 20 |
automatic log for run 185
Comment:
running HV scan |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = .92
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: default_11.conf
|
Name = /home/silicon/RD50-MPW4/tb_desy_apr24/mpw4.conf
[DataCollector.mpw4_dc]
DISABLE_PRINT = 1
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_MN = mpw4_mon
XILINX_IP = 192.168.201.1
[DataCollector.tel_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/adenium/adenium_run$6R$X
[DataCollector.tlu_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/tlu/tlu_run$6R$X
[LogCollector.log]
[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
[Producer.MuPix8]
#EUDAQ_DC = tel_dc
#lazyFrog = -25
#register_value = 0
ThPix = 144
[Producer.RD50_MPW4_0]
voltage_key = th
voltage_value = 0.92
[Producer.aida_tlu]
# Clock source (0 = no clock, 1= Si5345, 2= FPGA)
# Generate internal triggers (in Hz, 0 = no triggers)
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
#DUTMask = 0x3
#DUTMaskModeModifier = 0x30
#PMT1_V = 0.8
#PMT2_V = 0.85
#PMT3_V = 0.8
#PMT4_V = 0.0
#trigMaskLo = 0x00000040
DACThreshold0 = +0.3
DACThreshold1 = -0.04
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12
DACThreshold5 = -0.12
DUTIgnoreBusy = 0x0
DUTIgnoreShutterVeto = 0x0
DUTMask = 0xD
DUTMaskMode = 0xF1
EUDAQ_DC = tlu_dc
EnableRecordData = 1
EnableShutterMode = 0x0
FileComment = mpw3
HDMI1_clk = 1
HDMI1_set = 0x7
HDMI2_clk = 1
HDMI2_set = 0x7
HDMI3_clk = 1
HDMI3_set = 0x7
HDMI4_clk = 1
HDMI4_set = 0x7
InternalShutterInterval = 0
InternalTriggerFreq = 0
LEMOclk = 0
MinSpillTimeOnins = 4.5
MinSpilldownTimeins = 0.5
PlotWindowSizeinns = 40e9
ShutterOffTime = 200000000
ShutterOnTime = 0
ShutterSource = 5
ShutterVetoOffTime = 0
ThreshEvBegin = 1
ThreshEvEnd = 1
ThreshPartBegin = 1
ThreshPartEnd = 1
confid = 20201311
delayStart = 200
in0_DEL = 0
in0_STR = 0x3F
in1_DEL = 0
in1_STR = 1
in2_DEL = 0
in2_STR = 0x3F
in3_DEL = 0
in3_STR = 1
in4_DEL = 0
in4_STR = 0
in5_DEL = 0
in5_STR = 0
skipconf = 0
trigMaskHi = 0x00000000
trigMaskLo = 0x00000002
trigPol = 0x3E
verbose = 1
[Producer.altel]
EUDAQ_DC = tel_dc
EUDAQ_ID = 1
[Producer.elog1]
files2log = "peary_config.cfg, matrix_mpw4.txt"
start_cmd = "./get_mpw4_configs.sh"
[Producer.keithleyPS]
max_current = 5e-6
voltage = -25
[RunControl]
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
|
|
199
|
Wed Apr 24 15:25:21 2024 |
tb-crew | HV scan | 186 | Wxxx topside | unirradiated | 4.2 | Unknown | 24.04.2024 15:21:15 | 24.04.2024 15:25:39 | 4 |
automatic log for run 186
Comment:
running HV scan manually (-210V, -50uA) |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = .92
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: default_11.conf
|
Name = /home/silicon/RD50-MPW4/tb_desy_apr24/mpw4.conf
[DataCollector.mpw4_dc]
DISABLE_PRINT = 1
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_MN = mpw4_mon
XILINX_IP = 192.168.201.1
[DataCollector.tel_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/adenium/adenium_run$6R$X
[DataCollector.tlu_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/tlu/tlu_run$6R$X
[LogCollector.log]
[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
[Producer.MuPix8]
#EUDAQ_DC = tel_dc
#lazyFrog = -25
#register_value = 0
ThPix = 144
[Producer.RD50_MPW4_0]
voltage_key = th
voltage_value = 0.92
[Producer.aida_tlu]
# Clock source (0 = no clock, 1= Si5345, 2= FPGA)
# Generate internal triggers (in Hz, 0 = no triggers)
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
#DUTMask = 0x3
#DUTMaskModeModifier = 0x30
#PMT1_V = 0.8
#PMT2_V = 0.85
#PMT3_V = 0.8
#PMT4_V = 0.0
#trigMaskLo = 0x00000040
DACThreshold0 = +0.3
DACThreshold1 = -0.04
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12
DACThreshold5 = -0.12
DUTIgnoreBusy = 0x0
DUTIgnoreShutterVeto = 0x0
DUTMask = 0xD
DUTMaskMode = 0xF1
EUDAQ_DC = tlu_dc
EnableRecordData = 1
EnableShutterMode = 0x0
FileComment = mpw3
HDMI1_clk = 1
HDMI1_set = 0x7
HDMI2_clk = 1
HDMI2_set = 0x7
HDMI3_clk = 1
HDMI3_set = 0x7
HDMI4_clk = 1
HDMI4_set = 0x7
InternalShutterInterval = 0
InternalTriggerFreq = 0
LEMOclk = 0
MinSpillTimeOnins = 4.5
MinSpilldownTimeins = 0.5
PlotWindowSizeinns = 40e9
ShutterOffTime = 200000000
ShutterOnTime = 0
ShutterSource = 5
ShutterVetoOffTime = 0
ThreshEvBegin = 1
ThreshEvEnd = 1
ThreshPartBegin = 1
ThreshPartEnd = 1
confid = 20201311
delayStart = 200
in0_DEL = 0
in0_STR = 0x3F
in1_DEL = 0
in1_STR = 1
in2_DEL = 0
in2_STR = 0x3F
in3_DEL = 0
in3_STR = 1
in4_DEL = 0
in4_STR = 0
in5_DEL = 0
in5_STR = 0
skipconf = 0
trigMaskHi = 0x00000000
trigMaskLo = 0x00000002
trigPol = 0x3E
verbose = 1
[Producer.altel]
EUDAQ_DC = tel_dc
EUDAQ_ID = 1
[Producer.elog1]
files2log = "peary_config.cfg, matrix_mpw4.txt"
start_cmd = "./get_mpw4_configs.sh"
[Producer.keithleyPS]
max_current = 5e-6
voltage = -25
[RunControl]
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
|
|
200
|
Wed Apr 24 15:27:06 2024 |
tb-crew | HV scan | | Wxxx topside | unirradiated | 4.2 | Unknown | | | |
| tipped in noise with HV increase |
|
201
|
Wed Apr 24 15:29:38 2024 |
tb-crew | HV scan | 187 | Wxxx topside | unirradiated | 4.2 | Unknown | 24.04.2024 15:27:58 | 24.04.2024 15:29:56 | 1 |
automatic log for run 187
Comment:
tipped in noise with HV increase |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = .93
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: mpw4.conf
|
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",".
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"
[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200
## HDMI CONFIGURATION
# 4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
# Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
# Enable/Disable clock on differential LEMO
LEMOclk = 0
## PMT POWER CONFIGURATION
#PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
#PMT2_V= 0.85 #0.6363 #Szinti 4x4cm
#PMT3_V= 0.8
#PMT4_V= 0.0
## TRIGGER CONFIGURATION
# 2 words 32bit: Hi + Lo
# combinations of coincidence are now possible!
# Triggering on concidence of scintillator & telepix
trigMaskLo = 0x00000002
#trigMaskLo = 0x00000040 # 0 and 2
trigMaskHi = 0x00000000
# EXTERNAL TRIGGER INPUTs
# Stretch, delay in 6.25ns ticks
in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence
in0_DEL = 0 # factor to delay, e.g. compensate
in1_STR = 1
in1_DEL = 0
in2_STR = 0x3F
in2_DEL = 0
in3_STR = 1
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0
in5_DEL = 0
# trigger on rising (0) / falling (1) edge of the trigger input
# Here: all falling edge (scinti), but channel 0 rising edge (Telepix)
trigPol = 0x3E # 111110
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00
## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3 #-0.012
DACThreshold1 = -0.04 #-0.012
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12
## DUT CONFIGURATION
# DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xD
# DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0xF1
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
#DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben
# Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1
# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)
## DATA COLLECTOR
EUDAQ_DC= tlu_dc
## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1
[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing
[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[DataCollector.tel_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[Producer.RD50_MPW4_0]
voltage_key = "th"
voltage_value = 0.92
[Producer.altel]
EUDAQ_ID=1
EUDAQ_DC=tel_dc
[Producer.MuPix8]
ThPix = 144
#lazyFrog = -25
#register_value = 0
#EUDAQ_DC = tel_dc
[Producer.keithleyPS]
voltage = -300
max_current = 5e-6
[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1
[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
|
|
202
|
Wed Apr 24 15:32:05 2024 |
tb-crew | HV scan | 188 | Wxxx topside | unirradiated | 4.2 | Unknown | 24.04.2024 15:31:47 | 24.04.2024 15:32:22 | 0 |
automatic log for run 188
Comment:
changing thr now |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = .95
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: mpw4.conf
|
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",".
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"
[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200
## HDMI CONFIGURATION
# 4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
# Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
# Enable/Disable clock on differential LEMO
LEMOclk = 0
## PMT POWER CONFIGURATION
#PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
#PMT2_V= 0.85 #0.6363 #Szinti 4x4cm
#PMT3_V= 0.8
#PMT4_V= 0.0
## TRIGGER CONFIGURATION
# 2 words 32bit: Hi + Lo
# combinations of coincidence are now possible!
# Triggering on concidence of scintillator & telepix
trigMaskLo = 0x00000002
#trigMaskLo = 0x00000040 # 0 and 2
trigMaskHi = 0x00000000
# EXTERNAL TRIGGER INPUTs
# Stretch, delay in 6.25ns ticks
in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence
in0_DEL = 0 # factor to delay, e.g. compensate
in1_STR = 1
in1_DEL = 0
in2_STR = 0x3F
in2_DEL = 0
in3_STR = 1
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0
in5_DEL = 0
# trigger on rising (0) / falling (1) edge of the trigger input
# Here: all falling edge (scinti), but channel 0 rising edge (Telepix)
trigPol = 0x3E # 111110
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00
## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3 #-0.012
DACThreshold1 = -0.04 #-0.012
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12
## DUT CONFIGURATION
# DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xD
# DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0xF1
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
#DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben
# Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1
# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)
## DATA COLLECTOR
EUDAQ_DC= tlu_dc
## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1
[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing
[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[DataCollector.tel_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[Producer.RD50_MPW4_0]
voltage_key = "th"
voltage_value = 0.92
[Producer.altel]
EUDAQ_ID=1
EUDAQ_DC=tel_dc
[Producer.MuPix8]
ThPix = 144
#lazyFrog = -25
#register_value = 0
#EUDAQ_DC = tel_dc
[Producer.keithleyPS]
voltage = -300
max_current = 5e-6
[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1
[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
|
|
203
|
Wed Apr 24 15:33:22 2024 |
tb-crew | HV scan | 189 | Wxxx topside | unirradiated | 4.2 | Unknown | 24.04.2024 15:33:11 | 24.04.2024 15:33:39 | 0 |
automatic log for run 189
Comment:
changing thr now |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = .99
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: mpw4.conf
|
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",".
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"
[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200
## HDMI CONFIGURATION
# 4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
# Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
# Enable/Disable clock on differential LEMO
LEMOclk = 0
## PMT POWER CONFIGURATION
#PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
#PMT2_V= 0.85 #0.6363 #Szinti 4x4cm
#PMT3_V= 0.8
#PMT4_V= 0.0
## TRIGGER CONFIGURATION
# 2 words 32bit: Hi + Lo
# combinations of coincidence are now possible!
# Triggering on concidence of scintillator & telepix
trigMaskLo = 0x00000002
#trigMaskLo = 0x00000040 # 0 and 2
trigMaskHi = 0x00000000
# EXTERNAL TRIGGER INPUTs
# Stretch, delay in 6.25ns ticks
in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence
in0_DEL = 0 # factor to delay, e.g. compensate
in1_STR = 1
in1_DEL = 0
in2_STR = 0x3F
in2_DEL = 0
in3_STR = 1
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0
in5_DEL = 0
# trigger on rising (0) / falling (1) edge of the trigger input
# Here: all falling edge (scinti), but channel 0 rising edge (Telepix)
trigPol = 0x3E # 111110
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00
## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3 #-0.012
DACThreshold1 = -0.04 #-0.012
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12
## DUT CONFIGURATION
# DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xD
# DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0xF1
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
#DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben
# Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1
# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)
## DATA COLLECTOR
EUDAQ_DC= tlu_dc
## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1
[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing
[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[DataCollector.tel_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[Producer.RD50_MPW4_0]
voltage_key = "th"
voltage_value = 0.92
[Producer.altel]
EUDAQ_ID=1
EUDAQ_DC=tel_dc
[Producer.MuPix8]
ThPix = 144
#lazyFrog = -25
#register_value = 0
#EUDAQ_DC = tel_dc
[Producer.keithleyPS]
voltage = -300
max_current = 5e-6
[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1
[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
|
|
204
|
Wed Apr 24 15:35:03 2024 |
tb-crew | HV scan | 190 | Wxxx topside | unirradiated | 4.2 | Unknown | 24.04.2024 15:35:11 | 24.04.2024 15:35:21 | 0 |
automatic log for run 190
Comment:
changing thr now |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 1.2
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: mpw4.conf
|
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",".
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"
[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200
## HDMI CONFIGURATION
# 4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
# Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
# Enable/Disable clock on differential LEMO
LEMOclk = 0
## PMT POWER CONFIGURATION
#PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
#PMT2_V= 0.85 #0.6363 #Szinti 4x4cm
#PMT3_V= 0.8
#PMT4_V= 0.0
## TRIGGER CONFIGURATION
# 2 words 32bit: Hi + Lo
# combinations of coincidence are now possible!
# Triggering on concidence of scintillator & telepix
trigMaskLo = 0x00000002
#trigMaskLo = 0x00000040 # 0 and 2
trigMaskHi = 0x00000000
# EXTERNAL TRIGGER INPUTs
# Stretch, delay in 6.25ns ticks
in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence
in0_DEL = 0 # factor to delay, e.g. compensate
in1_STR = 1
in1_DEL = 0
in2_STR = 0x3F
in2_DEL = 0
in3_STR = 1
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0
in5_DEL = 0
# trigger on rising (0) / falling (1) edge of the trigger input
# Here: all falling edge (scinti), but channel 0 rising edge (Telepix)
trigPol = 0x3E # 111110
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00
## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3 #-0.012
DACThreshold1 = -0.04 #-0.012
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12
## DUT CONFIGURATION
# DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xD
# DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0xF1
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
#DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben
# Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1
# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)
## DATA COLLECTOR
EUDAQ_DC= tlu_dc
## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1
[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing
[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[DataCollector.tel_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[Producer.RD50_MPW4_0]
voltage_key = "th"
voltage_value = 0.92
[Producer.altel]
EUDAQ_ID=1
EUDAQ_DC=tel_dc
[Producer.MuPix8]
ThPix = 144
#lazyFrog = -25
#register_value = 0
#EUDAQ_DC = tel_dc
[Producer.keithleyPS]
voltage = -300
max_current = 5e-6
[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1
[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
|
|
205
|
Wed Apr 24 15:44:06 2024 |
tb-crew | HV scan | 191 | Wxxx topside | unirradiated | 4.2 | Unknown | 24.04.2024 15:39:31 | 24.04.2024 15:44:23 | 4 |
automatic log for run 191
Comment:
back to HV -190V, too noisy |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = .92
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: mpw4.conf
|
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",".
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"
[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200
## HDMI CONFIGURATION
# 4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
# Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
# Enable/Disable clock on differential LEMO
LEMOclk = 0
## PMT POWER CONFIGURATION
#PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
#PMT2_V= 0.85 #0.6363 #Szinti 4x4cm
#PMT3_V= 0.8
#PMT4_V= 0.0
## TRIGGER CONFIGURATION
# 2 words 32bit: Hi + Lo
# combinations of coincidence are now possible!
# Triggering on concidence of scintillator & telepix
trigMaskLo = 0x00000002
#trigMaskLo = 0x00000040 # 0 and 2
trigMaskHi = 0x00000000
# EXTERNAL TRIGGER INPUTs
# Stretch, delay in 6.25ns ticks
in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence
in0_DEL = 0 # factor to delay, e.g. compensate
in1_STR = 1
in1_DEL = 0
in2_STR = 0x3F
in2_DEL = 0
in3_STR = 1
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0
in5_DEL = 0
# trigger on rising (0) / falling (1) edge of the trigger input
# Here: all falling edge (scinti), but channel 0 rising edge (Telepix)
trigPol = 0x3E # 111110
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00
## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3 #-0.012
DACThreshold1 = -0.04 #-0.012
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12
## DUT CONFIGURATION
# DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xD
# DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0xF1
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
#DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben
# Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1
# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)
## DATA COLLECTOR
EUDAQ_DC= tlu_dc
## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1
[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing
[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[DataCollector.tel_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[Producer.RD50_MPW4_0]
voltage_key = "th"
voltage_value = 0.92
[Producer.altel]
EUDAQ_ID=1
EUDAQ_DC=tel_dc
[Producer.MuPix8]
ThPix = 144
#lazyFrog = -25
#register_value = 0
#EUDAQ_DC = tel_dc
[Producer.keithleyPS]
voltage = -300
max_current = 5e-6
[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1
[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
|
|
206
|
Wed Apr 24 16:26:17 2024 |
tb-crew | HV scan | 192 | Wxxx topside | unirradiated | 4.2 | Unknown | 24.04.2024 16:17:07 | 24.04.2024 16:26:34 | 9 |
automatic log for run 192
Comment:
rotated DUT by ~20deg |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = .92
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: mpw4.conf
|
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",".
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"
[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200
## HDMI CONFIGURATION
# 4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
# Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
# Enable/Disable clock on differential LEMO
LEMOclk = 0
## PMT POWER CONFIGURATION
#PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
#PMT2_V= 0.85 #0.6363 #Szinti 4x4cm
#PMT3_V= 0.8
#PMT4_V= 0.0
## TRIGGER CONFIGURATION
# 2 words 32bit: Hi + Lo
# combinations of coincidence are now possible!
# Triggering on concidence of scintillator & telepix
trigMaskLo = 0x00000002
#trigMaskLo = 0x00000040 # 0 and 2
trigMaskHi = 0x00000000
# EXTERNAL TRIGGER INPUTs
# Stretch, delay in 6.25ns ticks
in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence
in0_DEL = 0 # factor to delay, e.g. compensate
in1_STR = 1
in1_DEL = 0
in2_STR = 0x3F
in2_DEL = 0
in3_STR = 1
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0
in5_DEL = 0
# trigger on rising (0) / falling (1) edge of the trigger input
# Here: all falling edge (scinti), but channel 0 rising edge (Telepix)
trigPol = 0x3E # 111110
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00
## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3 #-0.012
DACThreshold1 = -0.04 #-0.012
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12
## DUT CONFIGURATION
# DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xD
# DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0xF1
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
#DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben
# Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1
# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)
## DATA COLLECTOR
EUDAQ_DC= tlu_dc
## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1
[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing
[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[DataCollector.tel_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[Producer.RD50_MPW4_0]
voltage_key = "th"
voltage_value = 0.92
[Producer.altel]
EUDAQ_ID=1
EUDAQ_DC=tel_dc
[Producer.MuPix8]
ThPix = 144
#lazyFrog = -25
#register_value = 0
#EUDAQ_DC = tel_dc
[Producer.keithleyPS]
voltage = -300
max_current = 5e-6
[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1
[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
|
|
207
|
Wed Apr 24 16:37:39 2024 |
tb-crew | HV scan | 193 | Wxxx topside | unirradiated | 4.2 | Unknown | 24.04.2024 16:35:22 | 24.04.2024 16:37:57 | 2 |
automatic log for run 193
Comment:
rotated DUT by ~20deg |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = .92
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: mpw4.conf
|
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",".
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"
[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200
## HDMI CONFIGURATION
# 4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
# Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
# Enable/Disable clock on differential LEMO
LEMOclk = 0
## PMT POWER CONFIGURATION
#PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
#PMT2_V= 0.85 #0.6363 #Szinti 4x4cm
#PMT3_V= 0.8
#PMT4_V= 0.0
## TRIGGER CONFIGURATION
# 2 words 32bit: Hi + Lo
# combinations of coincidence are now possible!
# Triggering on concidence of scintillator & telepix
trigMaskLo = 0x00000002
#trigMaskLo = 0x00000040 # 0 and 2
trigMaskHi = 0x00000000
# EXTERNAL TRIGGER INPUTs
# Stretch, delay in 6.25ns ticks
in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence
in0_DEL = 0 # factor to delay, e.g. compensate
in1_STR = 1
in1_DEL = 0
in2_STR = 0x3F
in2_DEL = 0
in3_STR = 1
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0
in5_DEL = 0
# trigger on rising (0) / falling (1) edge of the trigger input
# Here: all falling edge (scinti), but channel 0 rising edge (Telepix)
trigPol = 0x3E # 111110
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00
## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3 #-0.012
DACThreshold1 = -0.04 #-0.012
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12
## DUT CONFIGURATION
# DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xD
# DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0xF1
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
#DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben
# Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1
# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)
## DATA COLLECTOR
EUDAQ_DC= tlu_dc
## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1
[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing
[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[DataCollector.tel_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[Producer.RD50_MPW4_0]
voltage_key = "th"
voltage_value = 0.92
[Producer.altel]
EUDAQ_ID=1
EUDAQ_DC=tel_dc
[Producer.MuPix8]
ThPix = 144
#lazyFrog = -25
#register_value = 0
#EUDAQ_DC = tel_dc
[Producer.keithleyPS]
voltage = -300
max_current = 5e-6
[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1
[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
|
|
208
|
Wed Apr 24 16:41:20 2024 |
tb-crew | HV scan | 194 | Wxxx topside | unirradiated | 4.2 | Unknown | 24.04.2024 16:38:43 | 24.04.2024 16:41:38 | 2 |
automatic log for run 194
Comment:
rotated DUT by ~20deg |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = .92
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: mpw4.conf
|
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",".
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"
[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200
## HDMI CONFIGURATION
# 4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
# Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
# Enable/Disable clock on differential LEMO
LEMOclk = 0
## PMT POWER CONFIGURATION
#PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
#PMT2_V= 0.85 #0.6363 #Szinti 4x4cm
#PMT3_V= 0.8
#PMT4_V= 0.0
## TRIGGER CONFIGURATION
# 2 words 32bit: Hi + Lo
# combinations of coincidence are now possible!
# Triggering on concidence of scintillator & telepix
trigMaskLo = 0x00000002
#trigMaskLo = 0x00000040 # 0 and 2
trigMaskHi = 0x00000000
# EXTERNAL TRIGGER INPUTs
# Stretch, delay in 6.25ns ticks
in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence
in0_DEL = 0 # factor to delay, e.g. compensate
in1_STR = 1
in1_DEL = 0
in2_STR = 0x3F
in2_DEL = 0
in3_STR = 1
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0
in5_DEL = 0
# trigger on rising (0) / falling (1) edge of the trigger input
# Here: all falling edge (scinti), but channel 0 rising edge (Telepix)
trigPol = 0x3E # 111110
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00
## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3 #-0.012
DACThreshold1 = -0.04 #-0.012
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12
## DUT CONFIGURATION
# DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xD
# DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0xF1
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
#DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben
# Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1
# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)
## DATA COLLECTOR
EUDAQ_DC= tlu_dc
## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1
[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing
[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[DataCollector.tel_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[Producer.RD50_MPW4_0]
voltage_key = "th"
voltage_value = 0.92
[Producer.altel]
EUDAQ_ID=1
EUDAQ_DC=tel_dc
[Producer.MuPix8]
ThPix = 144
#lazyFrog = -25
#register_value = 0
#EUDAQ_DC = tel_dc
[Producer.keithleyPS]
voltage = -300
max_current = 5e-6
[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1
[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
|
|
209
|
Wed Apr 24 16:43:41 2024 |
tb-crew | HV scan | 195 | Wxxx topside | unirradiated | 4.2 | Unknown | 24.04.2024 16:42:53 | 24.04.2024 16:43:59 | 1 |
automatic log for run 195
Comment:
rotated DUT by ~20deg |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = .92
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: mpw4.conf
|
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",".
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"
[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200
## HDMI CONFIGURATION
# 4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
# Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
# Enable/Disable clock on differential LEMO
LEMOclk = 0
## PMT POWER CONFIGURATION
#PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
#PMT2_V= 0.85 #0.6363 #Szinti 4x4cm
#PMT3_V= 0.8
#PMT4_V= 0.0
## TRIGGER CONFIGURATION
# 2 words 32bit: Hi + Lo
# combinations of coincidence are now possible!
# Triggering on concidence of scintillator & telepix
trigMaskLo = 0x00000002
#trigMaskLo = 0x00000040 # 0 and 2
trigMaskHi = 0x00000000
# EXTERNAL TRIGGER INPUTs
# Stretch, delay in 6.25ns ticks
in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence
in0_DEL = 0 # factor to delay, e.g. compensate
in1_STR = 1
in1_DEL = 0
in2_STR = 0x3F
in2_DEL = 0
in3_STR = 1
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0
in5_DEL = 0
# trigger on rising (0) / falling (1) edge of the trigger input
# Here: all falling edge (scinti), but channel 0 rising edge (Telepix)
trigPol = 0x3E # 111110
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00
## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3 #-0.012
DACThreshold1 = -0.04 #-0.012
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12
## DUT CONFIGURATION
# DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xD
# DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0xF1
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
#DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben
# Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1
# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)
## DATA COLLECTOR
EUDAQ_DC= tlu_dc
## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1
[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing
[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[DataCollector.tel_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[Producer.RD50_MPW4_0]
voltage_key = "th"
voltage_value = 0.92
[Producer.altel]
EUDAQ_ID=1
EUDAQ_DC=tel_dc
[Producer.MuPix8]
ThPix = 144
#lazyFrog = -25
#register_value = 0
#EUDAQ_DC = tel_dc
[Producer.keithleyPS]
voltage = -300
max_current = 5e-6
[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1
[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
|
|
210
|
Wed Apr 24 16:45:41 2024 |
tb-crew | HV scan | 196 | Wxxx topside | unirradiated | 4.2 | Unknown | 24.04.2024 16:45:39 | 24.04.2024 16:45:59 | 0 |
automatic log for run 196
Comment:
rotated DUT by ~20deg |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = .92
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: mpw4.conf
|
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",".
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"
[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200
## HDMI CONFIGURATION
# 4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
# Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
# Enable/Disable clock on differential LEMO
LEMOclk = 0
## PMT POWER CONFIGURATION
#PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
#PMT2_V= 0.85 #0.6363 #Szinti 4x4cm
#PMT3_V= 0.8
#PMT4_V= 0.0
## TRIGGER CONFIGURATION
# 2 words 32bit: Hi + Lo
# combinations of coincidence are now possible!
# Triggering on concidence of scintillator & telepix
trigMaskLo = 0x00000002
#trigMaskLo = 0x00000040 # 0 and 2
trigMaskHi = 0x00000000
# EXTERNAL TRIGGER INPUTs
# Stretch, delay in 6.25ns ticks
in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence
in0_DEL = 0 # factor to delay, e.g. compensate
in1_STR = 1
in1_DEL = 0
in2_STR = 0x3F
in2_DEL = 0
in3_STR = 1
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0
in5_DEL = 0
# trigger on rising (0) / falling (1) edge of the trigger input
# Here: all falling edge (scinti), but channel 0 rising edge (Telepix)
trigPol = 0x3E # 111110
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00
## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3 #-0.012
DACThreshold1 = -0.04 #-0.012
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12
## DUT CONFIGURATION
# DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xD
# DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0xF1
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
#DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben
# Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1
# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)
## DATA COLLECTOR
EUDAQ_DC= tlu_dc
## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1
[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing
[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[DataCollector.tel_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[Producer.RD50_MPW4_0]
voltage_key = "th"
voltage_value = 0.92
[Producer.altel]
EUDAQ_ID=1
EUDAQ_DC=tel_dc
[Producer.MuPix8]
ThPix = 144
#lazyFrog = -25
#register_value = 0
#EUDAQ_DC = tel_dc
[Producer.keithleyPS]
voltage = -300
max_current = 5e-6
[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1
[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
|
|
211
|
Wed Apr 24 16:47:43 2024 |
tb-crew | HV scan | 197 | Wxxx topside | unirradiated | 4.2 | Unknown | 24.04.2024 16:47:07 | 24.04.2024 16:48:01 | 0 |
automatic log for run 197
Comment:
rotated DUT by ~20deg |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = .92
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: mpw4.conf
|
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",".
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"
[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200
## HDMI CONFIGURATION
# 4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
# Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
# Enable/Disable clock on differential LEMO
LEMOclk = 0
## PMT POWER CONFIGURATION
#PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
#PMT2_V= 0.85 #0.6363 #Szinti 4x4cm
#PMT3_V= 0.8
#PMT4_V= 0.0
## TRIGGER CONFIGURATION
# 2 words 32bit: Hi + Lo
# combinations of coincidence are now possible!
# Triggering on concidence of scintillator & telepix
trigMaskLo = 0x00000002
#trigMaskLo = 0x00000040 # 0 and 2
trigMaskHi = 0x00000000
# EXTERNAL TRIGGER INPUTs
# Stretch, delay in 6.25ns ticks
in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence
in0_DEL = 0 # factor to delay, e.g. compensate
in1_STR = 1
in1_DEL = 0
in2_STR = 0x3F
in2_DEL = 0
in3_STR = 1
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0
in5_DEL = 0
# trigger on rising (0) / falling (1) edge of the trigger input
# Here: all falling edge (scinti), but channel 0 rising edge (Telepix)
trigPol = 0x3E # 111110
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00
## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3 #-0.012
DACThreshold1 = -0.04 #-0.012
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12
## DUT CONFIGURATION
# DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xD
# DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0xF1
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
#DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben
# Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1
# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)
## DATA COLLECTOR
EUDAQ_DC= tlu_dc
## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1
[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing
[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[DataCollector.tel_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[Producer.RD50_MPW4_0]
voltage_key = "th"
voltage_value = 0.92
[Producer.altel]
EUDAQ_ID=1
EUDAQ_DC=tel_dc
[Producer.MuPix8]
ThPix = 144
#lazyFrog = -25
#register_value = 0
#EUDAQ_DC = tel_dc
[Producer.keithleyPS]
voltage = -300
max_current = 5e-6
[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1
[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
|