ELOG testbeam-RD50-DESY-Apr2024

Home CMS Production Clean room MedAustron HEPHY testbeams old

testbeam-rd50-desy-Oct2024 testbeam-RD50-DESY-Apr2024 testbeam-RD50-DESY-Jul2023 testbeam-RD50-CERN-Oct2022 testbeam-DESY-Oct2017 testbeam-DESY-April2017 testbeam-SPS2015 testbeam-SPS2014 testbeam-DESY14 testbeam-SPS12 testbeam-SPS11 testbeam-SPS10 testbeam-SPS09 testbeam-SPS08 LP-TPC

Testbeam at DESY in 2024, Page 1 of 28

Not logged in

Find | Login | Help

Full | Summary | Threaded | Hide attachments

556 Entries

Goto page 1, 2, 3 ... 26, 27, 28 Next

ID	Date	Author	Subject	Run Number	DUT	Fluence	Beam Energy	Data	t-Start	t-Stop	Duration_min
321	Fri Apr 26 13:55:23 2024	tb-crew	rotation 20deg	295	W3 NIKHEF	unirradiated	4.2	Unknown	26.04.2024 12:24:01	26.04.2024 13:55:42	91
automatic log for run 295 Comment: lunch run
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 0.94 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 15 00 01 0 0 0 0 3 00 02 0 0 0 0 11 00 03 0 0 0 0 15 00 04 0 0 0 0 7 00 05 0 0 0 0 6 00 06 0 0 0 0 15 00 07 0 0 0 0 8 00 08 0 0 0 0 11 00 09 0 0 0 0 8 00 10 0 0 0 0 7 00 11 0 0 0 0 10 00 12 0 0 0 0 5 00 13 0 0 0 0 15 00 14 0 0 0 0 15 00 15 0 0 0 0 14 00 16 0 0 0 0 7 00 17 0 0 0 0 11 00 18 0 0 0 0 15 00 19 0 0 0 0 10 00 20 0 0 0 0 8 00 21 0 0 0 0 6 00 22 0 0 0 0 11 00 23 0 0 0 0 14 00 24 0 0 0 0 15 00 25 0 0 0 0 14 00 26 0 0 0 0 15 00 27 0 0 0 0 14 00 28 0 0 0 0 5 00 29 0 0 0 0 10 00 30 0 0 0 0 3 00 31 0 0 0 0 9 00 32 0 0 0 0 2 00 33 0 0 0 0 6 00 34 0 0 0 0 9 00 35 0 0 0 0 15 00 36 0 0 0 0 0 00 37 0 0 0 0 5 00 38 0 0 0 0 14 00 39 0 0 0 0 15 00 40 0 0 0 0 5 00 41 0 0 0 0 12 00 42 0 0 0 0 9 00 43 0 0 0 0 15 00 44 0 0 0 0 13 00 45 0 0 0 0 9 00 46 0 0 0 0 5 00 47 0 0 0 0 11 00 48 0 0 0 0 8 00 49 0 0 0 0 5 00 50 0 0 0 0 2 00 51 0 0 0 0 0 00 52 0 0 0 0 10 00 53 0 0 0 0 10 00 54 0 0 0 0 12 00 55 1 0 0 0 10 00 56 0 0 0 0 9 00 57 0 0 0 0 0 00 58 0 0 0 0 2 00 59 0 0 0 0 11 00 60 0 0 0 0 8 00 61 0 0 0 0 6 00 62 0 0 0 0 15 00 63 0 0 0 0 15 01 00 0 0 0 0 7 01 01 0 0 0 0 6 01 02 0 0 0 0 1 01 03 0 0 0 0 11 01 04 0 0 0 0 13 01 05 0 0 0 0 12 01 06 0 0 0 0 15 01 07 0 0 0 0 11 01 08 0 0 0 0 8 01 09 0 0 0 0 9 01 10 0 0 0 0 15 01 11 0 0 0 0 15 01 12 0 0 0 0 8 01 13 0 0 0 0 14 01 14 0 0 0 0 15 01 15 0 0 0 0 12 01 16 0 0 0 0 11 01 17 0 0 0 0 6 01 18 0 0 0 0 0 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 14 01 22 0 0 0 0 5 01 23 0 0 0 0 6 01 24 0 0 0 0 8 01 25 0 0 0 0 15 01 26 0 0 0 0 3 01 27 0 0 0 0 9 01 28 0 0 0 0 10 01 29 0 0 0 0 3 01 30 0 0 0 0 11 01 31 0 0 0 0 12 01 32 0 0 0 0 8 01 33 0 0 0 0 4 01 34 0 0 0 0 13 01 35 0 0 0 0 10 01 36 0 0 0 0 9 01 37 0 0 0 0 7 01 38 0 0 0 0 8 01 39 0 0 0 0 13 01 40 0 0 0 0 1 01 41 0 0 0 0 13 01 42 0 0 0 0 4 01 43 0 0 0 0 5 01 44 0 0 0 0 11 01 45 0 0 0 0 9 01 46 0 0 0 0 9 01 47 0 0 0 0 9 01 48 0 0 0 0 8 01 49 0 0 0 0 10 01 50 0 0 0 0 9 01 51 0 0 0 0 10 01 52 0 0 0 0 5 01 53 0 0 0 0 15 01 54 0 0 0 0 3 01 55 0 0 0 0 0 01 56 0 0 0 0 13 01 57 0 0 0 0 2 01 58 0 0 0 0 11 01 59 0 0 0 0 6 01 60 0 0 0 0 3 01 61 0 0 0 0 10 01 62 0 0 0 0 11 01 63 0 0 0 0 7 02 00 0 0 0 0 13 02 01 0 0 0 0 5 02 02 0 0 0 0 15 02 03 0 0 0 0 5 02 04 0 0 0 0 14 02 05 0 0 0 0 6 02 06 0 0 0 0 7 02 07 0 0 0 0 12 02 08 0 0 0 0 15 02 09 0 0 0 0 4 02 10 0 0 0 0 12 02 11 0 0 0 0 13 02 12 0 0 0 0 15 02 13 0 0 0 0 9 02 14 0 0 0 0 8 02 15 0 0 0 0 12 02 16 0 0 0 0 12 02 17 0 0 0 0 10 02 18 0 0 0 0 3 02 19 0 0 0 0 13 02 20 0 0 0 0 12 02 21 0 0 0 0 2 02 22 0 0 0 0 8 02 23 0 0 0 0 2 02 24 0 0 0 0 15 02 25 0 0 0 0 10 02 26 0 0 0 0 3 02 27 0 0 0 0 9 02 28 0 0 0 0 14 02 29 0 0 0 0 5 02 30 0 0 0 0 4 02 31 0 0 0 0 4 02 32 0 0 0 0 15 02 33 0 0 0 0 12 02 34 0 0 0 0 15 02 35 0 0 0 0 15 02 36 0 0 0 0 15 02 37 0 0 0 0 7 02 38 0 0 0 0 15 02 39 0 0 0 0 1 02 40 0 0 0 0 14 02 41 0 0 0 0 12 02 42 0 0 0 0 7 02 43 0 0 0 0 14 02 44 0 0 0 0 10 02 45 1 0 0 0 11 02 46 0 0 0 0 1 02 47 0 0 0 0 15 02 48 0 0 0 0 4 02 49 0 0 0 0 10 02 50 0 0 0 0 4 02 51 0 0 0 0 10 02 52 0 0 0 0 14 02 53 0 0 0 0 4 02 54 0 0 0 0 11 02 55 0 0 0 0 4 02 56 0 0 0 0 9 02 57 0 0 0 0 4 02 58 0 0 0 0 9 02 59 0 0 0 0 14 02 60 0 0 0 0 12 02 61 0 0 0 0 15 02 62 0 0 0 0 9 02 63 0 0 0 0 13 03 00 0 0 0 0 8 03 01 0 0 0 0 2 03 02 0 0 0 0 15 03 03 0 0 0 0 15 03 04 0 0 0 0 15 03 05 0 0 0 0 4 03 06 0 0 0 0 6 03 07 0 0 0 0 0 03 08 0 0 0 0 15 03 09 0 0 0 0 11 03 10 0 0 0 0 15 03 11 0 0 0 0 15 03 12 0 0 0 0 4 03 13 0 0 0 0 13 03 14 0 0 0 0 8 03 15 0 0 0 0 13 03 16 0 0 0 0 8 03 17 0 0 0 0 7 03 18 0 0 0 0 3 03 19 0 0 0 0 2 03 20 0 0 0 0 13 03 21 0 0 0 0 2 03 22 0 0 0 0 0 03 23 0 0 0 0 5 03 24 0 0 0 0 0 03 25 0 0 0 0 3 03 26 0 0 0 0 9 03 27 0 0 0 0 14 03 28 0 0 0 0 15 03 29 0 0 0 0 15 03 30 0 0 0 0 0 03 31 0 0 0 0 14 03 32 0 0 0 0 12 03 33 0 0 0 0 7 03 34 0 0 0 0 7 03 35 0 0 0 0 7 03 36 0 0 0 0 4 03 37 0 0 0 0 10 03 38 0 0 0 0 2 03 39 0 0 0 0 5 03 40 0 0 0 0 1 03 41 0 0 0 0 15 03 42 0 0 0 0 3 03 43 0 0 0 0 2 03 44 0 0 0 0 3 03 45 0 0 0 0 9 03 46 0 0 0 0 8 03 47 0 0 0 0 9 03 48 0 0 0 0 1 03 49 0 0 0 0 9 03 50 0 0 0 0 6 03 51 0 0 0 0 13 03 52 0 0 0 0 15 03 53 0 0 0 0 6 03 54 0 0 0 0 15 03 55 0 0 0 0 8 03 56 0 0 0 0 3 03 57 0 0 0 0 11 03 58 0 0 0 0 7 03 59 0 0 0 0 15 03 60 0 0 0 0 15 03 61 0 0 0 0 3 03 62 0 0 0 0 9 03 63 0 0 0 0 4 04 00 0 0 0 0 12 04 01 0 0 0 0 15 04 02 0 0 0 0 14 04 03 0 0 0 0 9 04 04 0 0 0 0 10 04 05 0 0 0 0 14 04 06 0 0 0 0 4 04 07 0 0 0 0 14 04 08 0 0 0 0 14 04 09 0 0 0 0 13 04 10 0 0 0 0 15 04 11 0 0 0 0 15 04 12 0 0 0 0 4 04 13 0 0 0 0 10 04 14 0 0 0 0 11 04 15 0 0 0 0 5 04 16 0 0 0 0 4 04 17 0 0 0 0 12 04 18 0 0 0 0 10 04 19 0 0 0 0 9 04 20 0 0 0 0 4 04 21 0 0 0 0 14 04 22 0 0 0 0 4 04 23 0 0 0 0 13 04 24 0 0 0 0 13 04 25 0 0 0 0 12 04 26 0 0 0 0 12 04 27 0 0 0 0 15 04 28 0 0 0 0 7 04 29 0 0 0 0 14 04 30 0 0 0 0 15 04 31 0 0 0 0 8 04 32 0 0 0 0 13 04 33 0 0 0 0 10 04 34 0 0 0 0 8 04 35 0 0 0 0 12 04 36 0 0 0 0 14 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V= 0.8 #0.6363 #Szinti 4x4cm #PMT2_V= 0.85 #0.6363 #Szinti 4x4cm #PMT3_V= 0.8 #PMT4_V= 0.0 ## TRIGGER CONFIGURATION # 2 words 32bit: Hi + Lo # combinations of coincidence are now possible! # Triggering on concidence of scintillator & telepix trigMaskLo = 0x00000002 #trigMaskLo = 0x00000040 # 0 and 2 trigMaskHi = 0x00000000 # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 1 in1_DEL = 0 in2_STR = 0x3F in2_DEL = 0 in3_STR = 1 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # trigger on rising (0) / falling (1) edge of the trigger input # Here: all falling edge (scinti), but channel 0 rising edge (Telepix) trigPol = 0x3E # 111110 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 #-0.012 DACThreshold1 = -0.04 #-0.012 DACThreshold2 = -0.04 DACThreshold3 = +0.5 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [DataCollector.tel_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] voltage_key = "th" voltage_value = 0.94 [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=tel_dc [Producer.MuPix8] ThPix = 144 #lazyFrog = -25 #register_value = 0 #EUDAQ_DC = tel_dc [Producer.keithleyPS] voltage = -10 max_current = 100e-6 [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
206	Wed Apr 24 16:26:17 2024	tb-crew	HV scan	192	Wxxx topside	unirradiated	4.2	Unknown	24.04.2024 16:17:07	24.04.2024 16:26:34	9
automatic log for run 192 Comment: rotated DUT by ~20deg
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = .92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V= 0.8 #0.6363 #Szinti 4x4cm #PMT2_V= 0.85 #0.6363 #Szinti 4x4cm #PMT3_V= 0.8 #PMT4_V= 0.0 ## TRIGGER CONFIGURATION # 2 words 32bit: Hi + Lo # combinations of coincidence are now possible! # Triggering on concidence of scintillator & telepix trigMaskLo = 0x00000002 #trigMaskLo = 0x00000040 # 0 and 2 trigMaskHi = 0x00000000 # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 1 in1_DEL = 0 in2_STR = 0x3F in2_DEL = 0 in3_STR = 1 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # trigger on rising (0) / falling (1) edge of the trigger input # Here: all falling edge (scinti), but channel 0 rising edge (Telepix) trigPol = 0x3E # 111110 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 #-0.012 DACThreshold1 = -0.04 #-0.012 DACThreshold2 = -0.04 DACThreshold3 = +0.5 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [DataCollector.tel_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] voltage_key = "th" voltage_value = 0.92 [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=tel_dc [Producer.MuPix8] ThPix = 144 #lazyFrog = -25 #register_value = 0 #EUDAQ_DC = tel_dc [Producer.keithleyPS] voltage = -300 max_current = 5e-6 [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
66	Tue Apr 23 16:54:53 2024	tb-crew	basic "best" threshold / HV settings	49	Wxxx topside	unirradiated	4.2	Unknown	23.04.2024 16:46:46	23.04.2024 16:55:10	8
automatic log for run 49 Comment: threshold scan
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = .92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: default_3.conf
Name = /home/silicon/RD50-MPW4/tb_desy_apr24/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 0.995 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #DUTMaskModeModifier = 0x30 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskLo = 0x00000040 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = +0.5 DACThreshold4 = -0.12 DACThreshold5 = -0.12 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 FileComment = mpw3 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 MinSpillTimeOnins = 4.5 MinSpilldownTimeins = 0.5 PlotWindowSizeinns = 40e9 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 ThreshEvBegin = 1 ThreshEvEnd = 1 ThreshPartBegin = 1 ThreshPartEnd = 1 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000000 trigMaskLo = 0x00000002 trigPol = 0x3E verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] max_current = 5e-6 voltage = -200 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
285	Thu Apr 25 18:08:20 2024	tb-crew	HV scan	265	Wxxx backside	unirradiated	4.2	Unknown	25.04.2024 17:59:46	25.04.2024 18:08:39	8
automatic log for run 265 Comment: HV at -4V manually
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = .94 th__i = 3
Attachment 2: matrix_mpw4.txt
0 0 0 0 0 0 10 0 1 0 0 0 0 8 0 2 0 0 0 0 15 0 3 0 0 0 0 6 0 4 0 0 0 0 8 0 5 0 0 0 0 5 0 6 0 0 0 0 15 0 7 0 0 0 0 8 0 8 0 0 0 0 6 0 9 0 0 0 0 8 0 10 0 0 0 0 14 0 11 0 0 0 0 9 0 12 0 0 0 0 14 0 13 0 0 0 0 6 0 14 0 0 0 0 14 0 15 0 0 0 0 8 0 16 0 0 0 0 10 0 17 0 0 0 0 14 0 18 0 0 0 0 10 0 19 0 0 0 0 8 0 20 0 0 0 0 11 0 21 0 0 0 0 6 0 22 0 0 0 0 7 0 23 0 0 0 0 7 0 24 0 0 0 0 15 0 25 0 0 0 0 14 0 26 0 0 0 0 5 0 27 0 0 0 0 12 0 28 0 0 0 0 6 0 29 0 0 0 0 6 0 30 0 0 0 0 12 0 31 0 0 0 0 13 0 32 0 0 0 0 15 0 33 0 0 0 0 8 0 34 0 0 0 0 12 0 35 0 0 0 0 12 0 36 0 0 0 0 8 0 37 0 0 0 0 11 0 38 0 0 0 0 2 0 39 0 0 0 0 7 0 40 0 0 0 0 2 0 41 0 0 0 0 13 0 42 0 0 0 0 13 0 43 0 0 0 0 12 0 44 0 0 0 0 12 0 45 0 0 0 0 2 0 46 0 0 0 0 7 0 47 0 0 0 0 12 0 48 0 0 0 0 3 0 49 0 0 0 0 10 0 50 0 0 0 0 9 0 51 0 0 0 0 8 0 52 0 0 0 0 7 0 53 0 0 0 0 8 0 54 0 0 0 0 9 0 55 1 0 0 0 3 0 56 0 0 0 0 15 0 57 0 0 0 0 12 0 58 0 0 0 0 9 0 59 0 0 0 0 6 0 60 0 0 0 0 11 0 61 0 0 0 0 8 0 62 0 0 0 0 6 0 63 0 0 0 0 6 1 0 0 0 0 0 11 1 1 0 0 0 0 10 1 2 0 0 0 0 15 1 3 0 0 0 0 9 1 4 0 0 0 0 10 1 5 0 0 0 0 7 1 6 0 0 0 0 8 1 7 0 0 0 0 12 1 8 0 0 0 0 9 1 9 0 0 0 0 12 1 10 0 0 0 0 8 1 11 0 0 0 0 15 1 12 0 0 0 0 12 1 13 0 0 0 0 9 1 14 0 0 0 0 6 1 15 0 0 0 0 8 1 16 0 0 0 0 3 1 17 0 0 0 0 15 1 18 0 0 0 0 1 1 19 0 0 0 0 5 1 20 0 0 0 0 0 1 21 0 0 0 0 11 1 22 0 0 0 0 3 1 23 0 0 0 0 10 1 24 0 0 0 0 7 1 25 0 0 0 0 15 1 26 0 0 0 0 8 1 27 0 0 0 0 11 1 28 0 0 0 0 5 1 29 0 0 0 0 8 1 30 0 0 0 0 12 1 31 0 0 0 0 10 1 32 0 0 0 0 0 1 33 0 0 0 0 1 1 34 0 0 0 0 15 1 35 0 0 0 0 11 1 36 0 0 0 0 8 1 37 0 0 0 0 10 1 38 0 0 0 0 15 1 39 0 0 0 0 6 1 40 0 0 0 0 8 1 41 0 0 0 0 5 1 42 0 0 0 0 8 1 43 0 0 0 0 11 1 44 0 0 0 0 3 1 45 0 0 0 0 3 1 46 0 0 0 0 12 1 47 0 0 0 0 6 1 48 0 0 0 0 0 1 49 0 0 0 0 8 1 50 0 0 0 0 8 1 51 0 0 0 0 3 1 52 0 0 0 0 12 1 53 0 0 0 0 9 1 54 0 0 0 0 10 1 55 0 0 0 0 6 1 56 0 0 0 0 12 1 57 0 0 0 0 13 1 58 0 0 0 0 8 1 59 0 0 0 0 13 1 60 0 0 0 0 6 1 61 0 0 0 0 6 1 62 0 0 0 0 4 1 63 0 0 0 0 5 2 0 0 0 0 0 15 2 1 0 0 0 0 12 2 2 0 0 0 0 12 2 3 0 0 0 0 9 2 4 0 0 0 0 8 2 5 0 0 0 0 13 2 6 0 0 0 0 12 2 7 0 0 0 0 13 2 8 0 0 0 0 15 2 9 0 0 0 0 10 2 10 0 0 0 0 8 2 11 0 0 0 0 10 2 12 0 0 0 0 11 2 13 0 0 0 0 15 2 14 0 0 0 0 12 2 15 0 0 0 0 11 2 16 0 0 0 0 15 2 17 0 0 0 0 9 2 18 0 0 0 0 8 2 19 0 0 0 0 8 2 20 0 0 0 0 9 2 21 0 0 0 0 8 2 22 0 0 0 0 10 2 23 0 0 0 0 2 2 24 0 0 0 0 11 2 25 0 0 0 0 9 2 26 0 0 0 0 15 2 27 0 0 0 0 15 2 28 0 0 0 0 15 2 29 0 0 0 0 8 2 30 0 0 0 0 0 2 31 0 0 0 0 12 2 32 0 0 0 0 10 2 33 0 0 0 0 12 2 34 0 0 0 0 12 2 35 0 0 0 0 10 2 36 0 0 0 0 7 2 37 0 0 0 0 1 2 38 0 0 0 0 13 2 39 0 0 0 0 15 2 40 0 0 0 0 8 2 41 0 0 0 0 7 2 42 0 0 0 0 8 2 43 0 0 0 0 13 2 44 0 0 0 0 0 2 45 1 0 0 0 2 2 46 0 0 0 0 10 2 47 0 0 0 0 0 2 48 0 0 0 0 10 2 49 0 0 0 0 10 2 50 0 0 0 0 9 2 51 0 0 0 0 15 2 52 0 0 0 0 7 2 53 0 0 0 0 13 2 54 0 0 0 0 11 2 55 0 0 0 0 15 2 56 0 0 0 0 7 2 57 0 0 0 0 8 2 58 0 0 0 0 13 2 59 0 0 0 0 11 2 60 0 0 0 0 10 2 61 0 0 0 0 10 2 62 0 0 0 0 11 2 63 0 0 0 0 9 3 0 0 0 0 0 15 3 1 0 0 0 0 8 3 2 0 0 0 0 11 3 3 0 0 0 0 9 3 4 0 0 0 0 15 3 5 0 0 0 0 7 3 6 0 0 0 0 12 3 7 0 0 0 0 15 3 8 0 0 0 0 11 3 9 0 0 0 0 8 3 10 0 0 0 0 6 3 11 0 0 0 0 13 3 12 0 0 0 0 15 3 13 0 0 0 0 0 3 14 0 0 0 0 15 3 15 0 0 0 0 15 3 16 0 0 0 0 12 3 17 0 0 0 0 6 3 18 0 0 0 0 10 3 19 0 0 0 0 7 3 20 0 0 0 0 0 3 21 0 0 0 0 6 3 22 0 0 0 0 10 3 23 0 0 0 0 4 3 24 0 0 0 0 8 3 25 0 0 0 0 9 3 26 0 0 0 0 11 3 27 0 0 0 0 5 3 28 0 0 0 0 5 3 29 0 0 0 0 0 3 30 0 0 0 0 7 3 31 0 0 0 0 8 3 32 0 0 0 0 8 3 33 0 0 0 0 12 3 34 0 0 0 0 12 3 35 0 0 0 0 6 3 36 0 0 0 0 13 3 37 0 0 0 0 11 3 38 0 0 0 0 5 3 39 0 0 0 0 3 3 40 0 0 0 0 5 3 41 0 0 0 0 7 3 42 0 0 0 0 8 3 43 0 0 0 0 2 3 44 0 0 0 0 8 3 45 0 0 0 0 10 3 46 0 0 0 0 15 3 47 0 0 0 0 15 3 48 0 0 0 0 1 3 49 0 0 0 0 6 3 50 0 0 0 0 10 3 51 0 0 0 0 14 3 52 0 0 0 0 6 3 53 0 0 0 0 8 3 54 0 0 0 0 10 3 55 0 0 0 0 13 3 56 0 0 0 0 9 3 57 0 0 0 0 10 3 58 0 0 0 0 3 3 59 0 0 0 0 8 3 60 0 0 0 0 9 3 61 0 0 0 0 8 3 62 0 0 0 0 11 3 63 0 0 0 0 10 4 0 0 0 0 0 13 4 1 0 0 0 0 10 4 2 0 0 0 0 8 4 3 0 0 0 0 10 4 4 0 0 0 0 8 4 5 0 0 0 0 12 4 6 0 0 0 0 15 4 7 0 0 0 0 15 4 8 0 0 0 0 7 4 9 0 0 0 0 13 4 10 0 0 0 0 9 4 11 0 0 0 0 15 4 12 0 0 0 0 5 4 13 0 0 0 0 10 4 14 0 0 0 0 15 4 15 0 0 0 0 5 4 16 0 0 0 0 6 4 17 0 0 0 0 7 4 18 0 0 0 0 4 4 19 0 0 0 0 7 4 20 0 0 0 0 6 4 21 0 0 0 0 12 4 22 0 0 0 0 10 4 23 0 0 0 0 7 4 24 0 0 0 0 8 4 25 0 0 0 0 14 4 26 0 0 0 0 11 4 27 0 0 0 0 14 4 28 0 0 0 0 5 4 29 0 0 0 0 9 4 30 0 0 0 0 11 4 31 0 0 0 0 10 4 32 0 0 0 0 6 4 33 0 0 0 0 15 4 34 0 0 0 0 0 4 35 0 0 0 0 14 4 36 0 0 0 0 13 4 37 0 0 0 0 8 4 38 0 0 0 0 10 4 39 0 0 0 0 2 4 40 0 0 0 0 9 4 41 0 0 0 0 13 4 42 0 0 0 0 8 4 43 0 0 0 0 5 ... 3796 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V= 0.8 #0.6363 #Szinti 4x4cm #PMT2_V= 0.85 #0.6363 #Szinti 4x4cm #PMT3_V= 0.8 #PMT4_V= 0.0 ## TRIGGER CONFIGURATION # 2 words 32bit: Hi + Lo # combinations of coincidence are now possible! # Triggering on concidence of scintillator & telepix trigMaskLo = 0x00000002 #trigMaskLo = 0x00000040 # 0 and 2 trigMaskHi = 0x00000000 # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 1 in1_DEL = 0 in2_STR = 0x3F in2_DEL = 0 in3_STR = 1 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # trigger on rising (0) / falling (1) edge of the trigger input # Here: all falling edge (scinti), but channel 0 rising edge (Telepix) trigPol = 0x3E # 111110 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 #-0.012 DACThreshold1 = -0.04 #-0.012 DACThreshold2 = -0.04 DACThreshold3 = +0.5 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [DataCollector.tel_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] voltage_key = "th" voltage_value = 0.94 [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=tel_dc [Producer.MuPix8] ThPix = 144 #lazyFrog = -25 #register_value = 0 #EUDAQ_DC = tel_dc [Producer.keithleyPS] voltage = -400 max_current = 100e-6 [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
47	Tue Apr 23 12:39:10 2024	tb-crew	basic "best" threshold / HV settings	30	Wxxx topside	unirradiated	4.2	Unknown	23.04.2024 11:19:29	23.04.2024 12:39:26	79
automatic log for run 30 Comment: not ignoring anything an triggering on Telepix, Correlations still fine though...
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = .92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.85 #0.6363 #Szinti 4x4cm PMT3_V= 0.8 PMT4_V= 0.0 ## TRIGGER CONFIGURATION # 2 words 32bit: Hi + Lo # combinations of coincidence are now possible! # Triggering on concidence of scintillator & telepix trigMaskLo = 0x00000002 #trigMaskLo = 0x00000040 # 0 and 2 trigMaskHi = 0x00000000 # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 1 in1_DEL = 0 in2_STR = 0x3F in2_DEL = 0 in3_STR = 1 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # trigger on rising (0) / falling (1) edge of the trigger input # Here: all falling edge (scinti) channel 3 rising edge (Telepix) #trigPol = 0x3B # 111011 trigPol = 0x3E # 111110 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 #-0.012 DACThreshold1 = -0.04 #-0.012 DACThreshold2 = -0.04 DACThreshold3 = +0.5 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xB # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xDD # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [DataCollector.tel_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] voltage_key = "th" voltage_value = 0.92 [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=tel_dc [Producer.MuPix8] ThPix = 144 #lazyFrog = -25 #register_value = 0 #EUDAQ_DC = tel_dc [Producer.keithleyPS] voltage = -200 max_current = 5e-6 [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default [Producer.keithleyPS] voltage = -200 max_current = 5e-6
60	Tue Apr 23 15:38:43 2024	tb-crew	basic "best" threshold / HV settings	43	Wxxx topside	unirradiated	4.2	Unknown	23.04.2024 14:28:41	23.04.2024 15:39:00	70
automatic log for run 43 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = .92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V= 0.8 #0.6363 #Szinti 4x4cm #PMT2_V= 0.85 #0.6363 #Szinti 4x4cm #PMT3_V= 0.8 #PMT4_V= 0.0 ## TRIGGER CONFIGURATION # 2 words 32bit: Hi + Lo # combinations of coincidence are now possible! # Triggering on concidence of scintillator & telepix trigMaskLo = 0x00000002 #trigMaskLo = 0x00000040 # 0 and 2 trigMaskHi = 0x00000000 # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 1 in1_DEL = 0 in2_STR = 0x3F in2_DEL = 0 in3_STR = 1 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # trigger on rising (0) / falling (1) edge of the trigger input # Here: all falling edge (scinti), but channel 0 rising edge (Telepix) trigPol = 0x3E # 111110 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 #-0.012 DACThreshold1 = -0.04 #-0.012 DACThreshold2 = -0.04 DACThreshold3 = +0.5 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [DataCollector.tel_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] voltage_key = "th" voltage_value = 0.92 [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=tel_dc [Producer.MuPix8] ThPix = 144 #lazyFrog = -25 #register_value = 0 #EUDAQ_DC = tel_dc [Producer.keithleyPS] voltage = -200 max_current = 5e-6 [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default [Producer.keithleyPS] voltage = -200 max_current = 5e-6
22	Mon Apr 22 19:35:08 2024	tb-crew	basic "best" threshold / HV settings	9	Wxxx topside	unirradiated	4.2	Unknown	22.04.2024 18:31:01	22.04.2024 19:35:25	64
automatic log for run 9 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = .92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V= 0.8 #0.6363 #Szinti 4x4cm #PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION # 2 words 32bit: Hi + Lo trigMaskHi = 0x00000000 # combinations of coincidence are now possible! # Triggering on concidence of scintillator & telepix #trigMaskLo = 0x00000020 # 0 and 2 #trigMaskLo = 0x00000001 # 0 only # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 1 in1_DEL = 0 in2_STR = 0x3F in2_DEL = 0 in3_STR = 1 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # trigger on rising (0) / falling (1) edge of the trigger input # Here: all falling edge (scinti) channel 3 rising edge (Telepix) #trigPol = 0x3B # 111011 trigPol = 0x3E # 111110 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.5 #-0.012 DACThreshold1 = -0.1 #-0.012 DACThreshold2 = -0.5 DACThreshold3 = +0.5 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xB # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xDD # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [DataCollector.tel_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] voltage_key = "th" voltage_value = 0.92 [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=tel_dc [Producer.MuPix8] ThPix = 144 #lazyFrog = -25 #register_value = 0 #EUDAQ_DC = tel_dc [Producer.keithleyPS] voltage = -200 max_current = 5e-6 [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default [Producer.keithleyPS] voltage = -200 max_current = 5e-6
303	Fri Apr 26 09:08:28 2024	tb-crew	not trimmed	281	W3 NIKHEF	unirradiated	4.2	Unknown	25.04.2024 23:04:16	26.04.2024 09:08:47	604
automatic log for run 281 Comment: initial alignment run
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = .94 th__i = 3
Attachment 2: matrix_mpw4.txt
0 0 0 0 0 0 13 0 1 0 0 0 0 6 0 2 0 0 0 0 8 0 3 0 0 0 0 10 0 4 0 0 0 0 7 0 5 0 0 0 0 10 0 6 0 0 0 0 9 0 7 0 0 0 0 8 0 8 0 0 0 0 6 0 9 0 0 0 0 11 0 10 0 0 0 0 10 0 11 0 0 0 0 10 0 12 0 0 0 0 12 0 13 0 0 0 0 2 0 14 0 0 0 0 10 0 15 0 0 0 0 4 0 16 0 0 0 0 5 0 17 0 0 0 0 15 0 18 0 0 0 0 11 0 19 0 0 0 0 10 0 20 0 0 0 0 5 0 21 0 0 0 0 5 0 22 0 0 0 0 9 0 23 0 0 0 0 7 0 24 0 0 0 0 10 0 25 0 0 0 0 6 0 26 0 0 0 0 3 0 27 0 0 0 0 2 0 28 0 0 0 0 10 0 29 0 0 0 0 8 0 30 0 0 0 0 7 0 31 0 0 0 0 9 0 32 0 0 0 0 9 0 33 0 0 0 0 7 0 34 0 0 0 0 13 0 35 0 0 0 0 6 0 36 0 0 0 0 10 0 37 0 0 0 0 9 0 38 0 0 0 0 6 0 39 0 0 0 0 8 0 40 0 0 0 0 13 0 41 0 0 0 0 3 0 42 0 0 0 0 14 0 43 0 0 0 0 8 0 44 0 0 0 0 6 0 45 0 0 0 0 14 0 46 0 0 0 0 7 0 47 0 0 0 0 5 0 48 0 0 0 0 4 0 49 0 0 0 0 3 0 50 0 0 0 0 5 0 51 0 0 0 0 5 0 52 0 0 0 0 9 0 53 0 0 0 0 8 0 54 0 0 0 0 11 0 55 0 0 0 0 10 0 56 0 0 0 0 11 0 57 0 0 0 0 7 0 58 0 0 0 0 9 0 59 0 0 0 0 6 0 60 0 0 0 0 9 0 61 0 0 0 0 4 0 62 0 0 0 0 13 0 63 0 0 0 0 15 1 0 0 0 0 0 15 1 1 0 0 0 0 7 1 2 0 0 0 0 12 1 3 0 0 0 0 4 1 4 0 0 0 0 8 1 5 0 0 0 0 5 1 6 0 0 0 0 6 1 7 0 0 0 0 8 1 8 0 0 0 0 10 1 9 0 0 0 0 9 1 10 0 0 0 0 11 1 11 0 0 0 0 10 1 12 0 0 0 0 10 1 13 0 0 0 0 12 1 14 0 0 0 0 12 1 15 0 0 0 0 0 1 16 0 0 0 0 4 1 17 0 0 0 0 9 1 18 0 0 0 0 6 1 19 0 0 0 0 12 1 20 0 0 0 0 9 1 21 0 0 0 0 15 1 22 0 0 0 0 5 1 23 0 0 0 0 7 1 24 0 0 0 0 3 1 25 0 0 0 0 6 1 26 0 0 0 0 8 1 27 0 0 0 0 9 1 28 0 0 0 0 4 1 29 0 0 0 0 3 1 30 0 0 0 0 8 1 31 0 0 0 0 4 1 32 0 0 0 0 6 1 33 0 0 0 0 8 1 34 0 0 0 0 13 1 35 0 0 0 0 5 1 36 0 0 0 0 6 1 37 0 0 0 0 8 1 38 0 0 0 0 14 1 39 0 0 0 0 8 1 40 0 0 0 0 10 1 41 0 0 0 0 4 1 42 0 0 0 0 15 1 43 0 0 0 0 2 1 44 0 0 0 0 10 1 45 0 0 0 0 10 1 46 0 0 0 0 11 1 47 0 0 0 0 9 1 48 0 0 0 0 2 1 49 0 0 0 0 8 1 50 0 0 0 0 13 1 51 0 0 0 0 10 1 52 0 0 0 0 6 1 53 0 0 0 0 8 1 54 0 0 0 0 13 1 55 0 0 0 0 3 1 56 0 0 0 0 7 1 57 0 0 0 0 12 1 58 0 0 0 0 6 1 59 0 0 0 0 5 1 60 0 0 0 0 6 1 61 0 0 0 0 6 1 62 0 0 0 0 10 1 63 0 0 0 0 9 2 0 0 0 0 0 8 2 1 0 0 0 0 11 2 2 0 0 0 0 12 2 3 0 0 0 0 11 2 4 0 0 0 0 12 2 5 0 0 0 0 7 2 6 0 0 0 0 10 2 7 0 0 0 0 8 2 8 0 0 0 0 9 2 9 0 0 0 0 8 2 10 0 0 0 0 9 2 11 0 0 0 0 5 2 12 0 0 0 0 6 2 13 0 0 0 0 4 2 14 0 0 0 0 8 2 15 0 0 0 0 6 2 16 0 0 0 0 10 2 17 0 0 0 0 8 2 18 0 0 0 0 8 2 19 0 0 0 0 9 2 20 0 0 0 0 14 2 21 0 0 0 0 4 2 22 0 0 0 0 6 2 23 0 0 0 0 12 2 24 0 0 0 0 10 2 25 0 0 0 0 11 2 26 0 0 0 0 6 2 27 0 0 0 0 6 2 28 0 0 0 0 11 2 29 0 0 0 0 12 2 30 0 0 0 0 10 2 31 0 0 0 0 11 2 32 0 0 0 0 9 2 33 0 0 0 0 5 2 34 0 0 0 0 4 2 35 0 0 0 0 6 2 36 0 0 0 0 5 2 37 0 0 0 0 11 2 38 0 0 0 0 6 2 39 0 0 0 0 8 2 40 0 0 0 0 8 2 41 0 0 0 0 10 2 42 0 0 0 0 5 2 43 0 0 0 0 10 2 44 0 0 0 0 3 2 45 0 0 0 0 11 2 46 0 0 0 0 13 2 47 0 0 0 0 4 2 48 0 0 0 0 8 2 49 0 0 0 0 12 2 50 0 0 0 0 7 2 51 0 0 0 0 9 2 52 0 0 0 0 7 2 53 0 0 0 0 6 2 54 0 0 0 0 8 2 55 0 0 0 0 5 2 56 0 0 0 0 1 2 57 0 0 0 0 3 2 58 0 0 0 0 13 2 59 0 0 0 0 12 2 60 0 0 0 0 9 2 61 0 0 0 0 9 2 62 0 0 0 0 6 2 63 0 0 0 0 7 3 0 0 0 0 0 9 3 1 0 0 0 0 10 3 2 0 0 0 0 5 3 3 1 0 0 0 5 3 4 0 0 0 0 9 3 5 0 0 0 0 8 3 6 0 0 0 0 5 3 7 0 0 0 0 7 3 8 0 0 0 0 5 3 9 0 0 0 0 6 3 10 0 0 0 0 3 3 11 0 0 0 0 3 3 12 0 0 0 0 10 3 13 0 0 0 0 6 3 14 0 0 0 0 11 3 15 0 0 0 0 8 3 16 0 0 0 0 2 3 17 0 0 0 0 9 3 18 0 0 0 0 10 3 19 0 0 0 0 3 3 20 0 0 0 0 6 3 21 0 0 0 0 4 3 22 0 0 0 0 4 3 23 0 0 0 0 6 3 24 0 0 0 0 8 3 25 0 0 0 0 8 3 26 0 0 0 0 11 3 27 0 0 0 0 6 3 28 0 0 0 0 10 3 29 0 0 0 0 10 3 30 0 0 0 0 2 3 31 0 0 0 0 14 3 32 0 0 0 0 8 3 33 0 0 0 0 9 3 34 0 0 0 0 12 3 35 0 0 0 0 9 3 36 0 0 0 0 7 3 37 0 0 0 0 7 3 38 0 0 0 0 10 3 39 0 0 0 0 11 3 40 0 0 0 0 4 3 41 0 0 0 0 5 3 42 0 0 0 0 13 3 43 0 0 0 0 9 3 44 0 0 0 0 5 3 45 0 0 0 0 14 3 46 0 0 0 0 3 3 47 0 0 0 0 5 3 48 0 0 0 0 6 3 49 0 0 0 0 7 3 50 0 0 0 0 10 3 51 0 0 0 0 7 3 52 0 0 0 0 8 3 53 0 0 0 0 9 3 54 0 0 0 0 5 3 55 0 0 0 0 8 3 56 0 0 0 0 10 3 57 0 0 0 0 5 3 58 0 0 0 0 6 3 59 0 0 0 0 6 3 60 0 0 0 0 3 3 61 0 0 0 0 9 3 62 0 0 0 0 3 3 63 0 0 0 0 8 4 0 0 0 0 0 3 4 1 0 0 0 0 13 4 2 0 0 0 0 13 4 3 0 0 0 0 4 4 4 0 0 0 0 7 4 5 0 0 0 0 10 4 6 0 0 0 0 14 4 7 0 0 0 0 10 4 8 0 0 0 0 6 4 9 0 0 0 0 5 4 10 1 0 0 0 3 4 11 0 0 0 0 9 4 12 0 0 0 0 7 4 13 0 0 0 0 9 4 14 0 0 0 0 3 4 15 0 0 0 0 10 4 16 0 0 0 0 3 4 17 0 0 0 0 9 4 18 0 0 0 0 9 4 19 0 0 0 0 8 4 20 0 0 0 0 9 4 21 0 0 0 0 8 4 22 0 0 0 0 10 4 23 0 0 0 0 12 4 24 0 0 0 0 7 4 25 0 0 0 0 5 4 26 0 0 0 0 10 4 27 0 0 0 0 10 4 28 0 0 0 0 8 4 29 0 0 0 0 5 4 30 0 0 0 0 5 4 31 0 0 0 0 7 4 32 0 0 0 0 9 4 33 0 0 0 0 4 4 34 0 0 0 0 7 4 35 0 0 0 0 4 4 36 0 0 0 0 6 4 37 0 0 0 0 12 4 38 0 0 0 0 5 4 39 0 0 0 0 11 4 40 0 0 0 0 9 4 41 0 0 0 0 9 4 42 0 0 0 0 8 4 43 0 0 0 0 2 ... 3796 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V= 0.8 #0.6363 #Szinti 4x4cm #PMT2_V= 0.85 #0.6363 #Szinti 4x4cm #PMT3_V= 0.8 #PMT4_V= 0.0 ## TRIGGER CONFIGURATION # 2 words 32bit: Hi + Lo # combinations of coincidence are now possible! # Triggering on concidence of scintillator & telepix trigMaskLo = 0x00000002 #trigMaskLo = 0x00000040 # 0 and 2 trigMaskHi = 0x00000000 # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 1 in1_DEL = 0 in2_STR = 0x3F in2_DEL = 0 in3_STR = 1 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # trigger on rising (0) / falling (1) edge of the trigger input # Here: all falling edge (scinti), but channel 0 rising edge (Telepix) trigPol = 0x3E # 111110 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 #-0.012 DACThreshold1 = -0.04 #-0.012 DACThreshold2 = -0.04 DACThreshold3 = +0.5 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [DataCollector.tel_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] voltage_key = "th" voltage_value = 0.94 [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=tel_dc [Producer.MuPix8] ThPix = 144 #lazyFrog = -25 #register_value = 0 #EUDAQ_DC = tel_dc [Producer.keithleyPS] voltage = -10 max_current = 100e-6 [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
32	Tue Apr 23 09:20:22 2024	tb-crew	basic "best" threshold / HV settings	16	Wxxx topside	unirradiated	4.2	Unknown	23.04.2024 09:14:12	23.04.2024 09:20:39	6
automatic log for run 16 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = .92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V= 0.8 #0.6363 #Szinti 4x4cm #PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION # 2 words 32bit: Hi + Lo trigMaskHi = 0x00000000 # combinations of coincidence are now possible! # Triggering on concidence of scintillator & telepix #trigMaskLo = 0x00000020 # 0 and 2 #trigMaskLo = 0x00000001 # 0 only # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 1 in1_DEL = 0 in2_STR = 0x3F in2_DEL = 0 in3_STR = 1 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # trigger on rising (0) / falling (1) edge of the trigger input # Here: all falling edge (scinti) channel 3 rising edge (Telepix) #trigPol = 0x3B # 111011 trigPol = 0x3E # 111110 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.5 #-0.012 DACThreshold1 = -0.1 #-0.012 DACThreshold2 = -0.5 DACThreshold3 = +0.5 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xB # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xDD # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xF #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [DataCollector.tel_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] voltage_key = "th" voltage_value = 0.92 [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=tel_dc [Producer.MuPix8] ThPix = 144 #lazyFrog = -25 #register_value = 0 #EUDAQ_DC = tel_dc [Producer.keithleyPS] voltage = -200 max_current = 5e-6 [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default [Producer.keithleyPS] voltage = -200 max_current = 5e-6
35	Tue Apr 23 09:36:59 2024	tb-crew	basic "best" threshold / HV settings	18	Wxxx topside	unirradiated	4.2	Unknown	23.04.2024 09:30:46	23.04.2024 09:37:16	6
automatic log for run 18 Comment: not ignoring DUT0 (telepix) and DUT2 (Adenium) DUT1 (unpopulated) and 3 (MPW4) still ignoring
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = .92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V= 0.8 #0.6363 #Szinti 4x4cm #PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION # 2 words 32bit: Hi + Lo trigMaskHi = 0x00000000 # combinations of coincidence are now possible! # Triggering on concidence of scintillator & telepix #trigMaskLo = 0x00000020 # 0 and 2 #trigMaskLo = 0x00000001 # 0 only # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 1 in1_DEL = 0 in2_STR = 0x3F in2_DEL = 0 in3_STR = 1 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # trigger on rising (0) / falling (1) edge of the trigger input # Here: all falling edge (scinti) channel 3 rising edge (Telepix) #trigPol = 0x3B # 111011 trigPol = 0x3E # 111110 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.5 #-0.012 DACThreshold1 = -0.1 #-0.012 DACThreshold2 = -0.5 DACThreshold3 = +0.5 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xB # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xDD # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xA #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [DataCollector.tel_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] voltage_key = "th" voltage_value = 0.92 [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=tel_dc [Producer.MuPix8] ThPix = 144 #lazyFrog = -25 #register_value = 0 #EUDAQ_DC = tel_dc [Producer.keithleyPS] voltage = -200 max_current = 5e-6 [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default [Producer.keithleyPS] voltage = -200 max_current = 5e-6
310	Fri Apr 26 11:16:27 2024	tb-crew	bst thr runs	287	W3 NIKHEF	unirradiated	4.2	Unknown	26.04.2024 11:10:33	26.04.2024 11:16:46	6
automatic log for run 287 Comment: calibrated TDACs, HV= -190V (efficiency seems to be a bit lower than HEPHY backside)
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 0.94 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 15 00 01 0 0 0 0 3 00 02 0 0 0 0 11 00 03 0 0 0 0 15 00 04 0 0 0 0 7 00 05 0 0 0 0 6 00 06 0 0 0 0 15 00 07 0 0 0 0 8 00 08 0 0 0 0 11 00 09 0 0 0 0 8 00 10 0 0 0 0 7 00 11 0 0 0 0 10 00 12 0 0 0 0 5 00 13 0 0 0 0 15 00 14 0 0 0 0 15 00 15 0 0 0 0 14 00 16 0 0 0 0 7 00 17 0 0 0 0 11 00 18 0 0 0 0 15 00 19 0 0 0 0 10 00 20 0 0 0 0 8 00 21 0 0 0 0 6 00 22 0 0 0 0 11 00 23 0 0 0 0 14 00 24 0 0 0 0 15 00 25 0 0 0 0 14 00 26 0 0 0 0 15 00 27 0 0 0 0 14 00 28 0 0 0 0 5 00 29 0 0 0 0 10 00 30 0 0 0 0 3 00 31 0 0 0 0 9 00 32 0 0 0 0 2 00 33 0 0 0 0 6 00 34 0 0 0 0 9 00 35 0 0 0 0 15 00 36 0 0 0 0 0 00 37 0 0 0 0 5 00 38 0 0 0 0 14 00 39 0 0 0 0 15 00 40 0 0 0 0 5 00 41 0 0 0 0 12 00 42 0 0 0 0 9 00 43 0 0 0 0 15 00 44 0 0 0 0 13 00 45 0 0 0 0 9 00 46 0 0 0 0 5 00 47 0 0 0 0 11 00 48 0 0 0 0 8 00 49 0 0 0 0 5 00 50 0 0 0 0 2 00 51 0 0 0 0 0 00 52 0 0 0 0 10 00 53 0 0 0 0 10 00 54 0 0 0 0 12 00 55 1 0 0 0 10 00 56 0 0 0 0 9 00 57 0 0 0 0 0 00 58 0 0 0 0 2 00 59 0 0 0 0 11 00 60 0 0 0 0 8 00 61 0 0 0 0 6 00 62 0 0 0 0 15 00 63 0 0 0 0 15 01 00 0 0 0 0 7 01 01 0 0 0 0 6 01 02 0 0 0 0 1 01 03 0 0 0 0 11 01 04 0 0 0 0 13 01 05 0 0 0 0 12 01 06 0 0 0 0 15 01 07 0 0 0 0 11 01 08 0 0 0 0 8 01 09 0 0 0 0 9 01 10 0 0 0 0 15 01 11 0 0 0 0 15 01 12 0 0 0 0 8 01 13 0 0 0 0 14 01 14 0 0 0 0 15 01 15 0 0 0 0 12 01 16 0 0 0 0 11 01 17 0 0 0 0 6 01 18 0 0 0 0 0 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 14 01 22 0 0 0 0 5 01 23 0 0 0 0 6 01 24 0 0 0 0 8 01 25 0 0 0 0 15 01 26 0 0 0 0 3 01 27 0 0 0 0 9 01 28 0 0 0 0 10 01 29 0 0 0 0 3 01 30 0 0 0 0 11 01 31 0 0 0 0 12 01 32 0 0 0 0 8 01 33 0 0 0 0 4 01 34 0 0 0 0 13 01 35 0 0 0 0 10 01 36 0 0 0 0 9 01 37 0 0 0 0 7 01 38 0 0 0 0 8 01 39 0 0 0 0 13 01 40 0 0 0 0 1 01 41 0 0 0 0 13 01 42 0 0 0 0 4 01 43 0 0 0 0 5 01 44 0 0 0 0 11 01 45 0 0 0 0 9 01 46 0 0 0 0 9 01 47 0 0 0 0 9 01 48 0 0 0 0 8 01 49 0 0 0 0 10 01 50 0 0 0 0 9 01 51 0 0 0 0 10 01 52 0 0 0 0 5 01 53 0 0 0 0 15 01 54 0 0 0 0 3 01 55 0 0 0 0 0 01 56 0 0 0 0 13 01 57 0 0 0 0 2 01 58 0 0 0 0 11 01 59 0 0 0 0 6 01 60 0 0 0 0 3 01 61 0 0 0 0 10 01 62 0 0 0 0 11 01 63 0 0 0 0 7 02 00 0 0 0 0 13 02 01 0 0 0 0 5 02 02 0 0 0 0 15 02 03 0 0 0 0 5 02 04 0 0 0 0 14 02 05 0 0 0 0 6 02 06 0 0 0 0 7 02 07 0 0 0 0 12 02 08 0 0 0 0 15 02 09 0 0 0 0 4 02 10 0 0 0 0 12 02 11 0 0 0 0 13 02 12 0 0 0 0 15 02 13 0 0 0 0 9 02 14 0 0 0 0 8 02 15 0 0 0 0 12 02 16 0 0 0 0 12 02 17 0 0 0 0 10 02 18 0 0 0 0 3 02 19 0 0 0 0 13 02 20 0 0 0 0 12 02 21 0 0 0 0 2 02 22 0 0 0 0 8 02 23 0 0 0 0 2 02 24 0 0 0 0 15 02 25 0 0 0 0 10 02 26 0 0 0 0 3 02 27 0 0 0 0 9 02 28 0 0 0 0 14 02 29 0 0 0 0 5 02 30 0 0 0 0 4 02 31 0 0 0 0 4 02 32 0 0 0 0 15 02 33 0 0 0 0 12 02 34 0 0 0 0 15 02 35 0 0 0 0 15 02 36 0 0 0 0 15 02 37 0 0 0 0 7 02 38 0 0 0 0 15 02 39 0 0 0 0 1 02 40 0 0 0 0 14 02 41 0 0 0 0 12 02 42 0 0 0 0 7 02 43 0 0 0 0 14 02 44 0 0 0 0 10 02 45 1 0 0 0 11 02 46 0 0 0 0 1 02 47 0 0 0 0 15 02 48 0 0 0 0 4 02 49 0 0 0 0 10 02 50 0 0 0 0 4 02 51 0 0 0 0 10 02 52 0 0 0 0 14 02 53 0 0 0 0 4 02 54 0 0 0 0 11 02 55 0 0 0 0 4 02 56 0 0 0 0 9 02 57 0 0 0 0 4 02 58 0 0 0 0 9 02 59 0 0 0 0 14 02 60 0 0 0 0 12 02 61 0 0 0 0 15 02 62 0 0 0 0 9 02 63 0 0 0 0 13 03 00 0 0 0 0 8 03 01 0 0 0 0 2 03 02 0 0 0 0 15 03 03 0 0 0 0 15 03 04 0 0 0 0 15 03 05 0 0 0 0 4 03 06 0 0 0 0 6 03 07 0 0 0 0 0 03 08 0 0 0 0 15 03 09 0 0 0 0 11 03 10 0 0 0 0 15 03 11 0 0 0 0 15 03 12 0 0 0 0 4 03 13 0 0 0 0 13 03 14 0 0 0 0 8 03 15 0 0 0 0 13 03 16 0 0 0 0 8 03 17 0 0 0 0 7 03 18 0 0 0 0 3 03 19 0 0 0 0 2 03 20 0 0 0 0 13 03 21 0 0 0 0 2 03 22 0 0 0 0 0 03 23 0 0 0 0 5 03 24 0 0 0 0 0 03 25 0 0 0 0 3 03 26 0 0 0 0 9 03 27 0 0 0 0 14 03 28 0 0 0 0 15 03 29 0 0 0 0 15 03 30 0 0 0 0 0 03 31 0 0 0 0 14 03 32 0 0 0 0 12 03 33 0 0 0 0 7 03 34 0 0 0 0 7 03 35 0 0 0 0 7 03 36 0 0 0 0 4 03 37 0 0 0 0 10 03 38 0 0 0 0 2 03 39 0 0 0 0 5 03 40 0 0 0 0 1 03 41 0 0 0 0 15 03 42 0 0 0 0 3 03 43 0 0 0 0 2 03 44 0 0 0 0 3 03 45 0 0 0 0 9 03 46 0 0 0 0 8 03 47 0 0 0 0 9 03 48 0 0 0 0 1 03 49 0 0 0 0 9 03 50 0 0 0 0 6 03 51 0 0 0 0 13 03 52 0 0 0 0 15 03 53 0 0 0 0 6 03 54 0 0 0 0 15 03 55 0 0 0 0 8 03 56 0 0 0 0 3 03 57 0 0 0 0 11 03 58 0 0 0 0 7 03 59 0 0 0 0 15 03 60 0 0 0 0 15 03 61 0 0 0 0 3 03 62 0 0 0 0 9 03 63 0 0 0 0 4 04 00 0 0 0 0 12 04 01 0 0 0 0 15 04 02 0 0 0 0 14 04 03 0 0 0 0 9 04 04 0 0 0 0 10 04 05 0 0 0 0 14 04 06 0 0 0 0 4 04 07 0 0 0 0 14 04 08 0 0 0 0 14 04 09 0 0 0 0 13 04 10 0 0 0 0 15 04 11 0 0 0 0 15 04 12 0 0 0 0 4 04 13 0 0 0 0 10 04 14 0 0 0 0 11 04 15 0 0 0 0 5 04 16 0 0 0 0 4 04 17 0 0 0 0 12 04 18 0 0 0 0 10 04 19 0 0 0 0 9 04 20 0 0 0 0 4 04 21 0 0 0 0 14 04 22 0 0 0 0 4 04 23 0 0 0 0 13 04 24 0 0 0 0 13 04 25 0 0 0 0 12 04 26 0 0 0 0 12 04 27 0 0 0 0 15 04 28 0 0 0 0 7 04 29 0 0 0 0 14 04 30 0 0 0 0 15 04 31 0 0 0 0 8 04 32 0 0 0 0 13 04 33 0 0 0 0 10 04 34 0 0 0 0 8 04 35 0 0 0 0 12 04 36 0 0 0 0 14 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V= 0.8 #0.6363 #Szinti 4x4cm #PMT2_V= 0.85 #0.6363 #Szinti 4x4cm #PMT3_V= 0.8 #PMT4_V= 0.0 ## TRIGGER CONFIGURATION # 2 words 32bit: Hi + Lo # combinations of coincidence are now possible! # Triggering on concidence of scintillator & telepix trigMaskLo = 0x00000002 #trigMaskLo = 0x00000040 # 0 and 2 trigMaskHi = 0x00000000 # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 1 in1_DEL = 0 in2_STR = 0x3F in2_DEL = 0 in3_STR = 1 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # trigger on rising (0) / falling (1) edge of the trigger input # Here: all falling edge (scinti), but channel 0 rising edge (Telepix) trigPol = 0x3E # 111110 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 #-0.012 DACThreshold1 = -0.04 #-0.012 DACThreshold2 = -0.04 DACThreshold3 = +0.5 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [DataCollector.tel_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] voltage_key = "th" voltage_value = 0.94 [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=tel_dc [Producer.MuPix8] ThPix = 144 #lazyFrog = -25 #register_value = 0 #EUDAQ_DC = tel_dc [Producer.keithleyPS] voltage = -10 max_current = 100e-6 [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
30	Tue Apr 23 09:09:26 2024	tb-crew	basic "best" threshold / HV settings	15	Wxxx topside	unirradiated	4.2	Unknown	22.04.2024 23:09:49	23.04.2024 09:09:43	599
automatic log for run 15 Comment: Running over night (not maybe)
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = .92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V= 0.8 #0.6363 #Szinti 4x4cm #PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION # 2 words 32bit: Hi + Lo trigMaskHi = 0x00000000 # combinations of coincidence are now possible! # Triggering on concidence of scintillator & telepix #trigMaskLo = 0x00000020 # 0 and 2 #trigMaskLo = 0x00000001 # 0 only # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 1 in1_DEL = 0 in2_STR = 0x3F in2_DEL = 0 in3_STR = 1 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # trigger on rising (0) / falling (1) edge of the trigger input # Here: all falling edge (scinti) channel 3 rising edge (Telepix) #trigPol = 0x3B # 111011 trigPol = 0x3E # 111110 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.5 #-0.012 DACThreshold1 = -0.1 #-0.012 DACThreshold2 = -0.5 DACThreshold3 = +0.5 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xB # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xDD # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xF #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [DataCollector.tel_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] voltage_key = "th" voltage_value = 0.92 [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=tel_dc [Producer.MuPix8] ThPix = 144 #lazyFrog = -25 #register_value = 0 #EUDAQ_DC = tel_dc [Producer.keithleyPS] voltage = -200 max_current = 5e-6 [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default [Producer.keithleyPS] voltage = -200 max_current = 5e-6
376	Sat Apr 27 09:29:54 2024	tb-crew	HV scan (hi range)	335	W8 LIV	unirradiated	4.2	Unknown	26.04.2024 23:40:34	27.04.2024 09:30:14	589
automatic log for run 335 Comment: HV = -190V, overnight
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 0.94 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 13 04 1 0 0 0 -1 20 38 1 0 0 0 -1 36 16 1 0 0 0 -1 48 54 1 0 0 0 -1 57 39 1 0 0 0 -1 60 00 1 0 0 0 -1
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V= 0.8 #0.6363 #Szinti 4x4cm #PMT2_V= 0.85 #0.6363 #Szinti 4x4cm #PMT3_V= 0.8 #PMT4_V= 0.0 ## TRIGGER CONFIGURATION # 2 words 32bit: Hi + Lo # combinations of coincidence are now possible! # Triggering on concidence of scintillator & telepix trigMaskLo = 0x00000002 #trigMaskLo = 0x00000040 # 0 and 2 trigMaskHi = 0x00000000 # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 1 in1_DEL = 0 in2_STR = 0x3F in2_DEL = 0 in3_STR = 1 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # trigger on rising (0) / falling (1) edge of the trigger input # Here: all falling edge (scinti), but channel 0 rising edge (Telepix) trigPol = 0x3E # 111110 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 #-0.012 DACThreshold1 = -0.04 #-0.012 DACThreshold2 = -0.04 DACThreshold3 = +0.5 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [DataCollector.tel_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] voltage_key = "th" voltage_value = 0.94 [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=tel_dc [Producer.MuPix8] ThPix = 144 #lazyFrog = -25 #register_value = 0 #EUDAQ_DC = tel_dc [Producer.keithleyPS] voltage = -100 max_current = 100e-6 [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
24	Mon Apr 22 20:51:32 2024	tb-crew	basic "best" threshold / HV settings	11	Wxxx topside	unirradiated	4.2	Unknown	22.04.2024 19:53:38	22.04.2024 20:51:48	58
automatic log for run 11 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = .92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V= 0.8 #0.6363 #Szinti 4x4cm #PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION # 2 words 32bit: Hi + Lo trigMaskHi = 0x00000000 # combinations of coincidence are now possible! # Triggering on concidence of scintillator & telepix #trigMaskLo = 0x00000020 # 0 and 2 #trigMaskLo = 0x00000001 # 0 only # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 1 in1_DEL = 0 in2_STR = 0x3F in2_DEL = 0 in3_STR = 1 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # trigger on rising (0) / falling (1) edge of the trigger input # Here: all falling edge (scinti) channel 3 rising edge (Telepix) #trigPol = 0x3B # 111011 trigPol = 0x3E # 111110 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.5 #-0.012 DACThreshold1 = -0.1 #-0.012 DACThreshold2 = -0.5 DACThreshold3 = +0.5 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xB # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xDD # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x4 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [DataCollector.tel_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] voltage_key = "th" voltage_value = 0.92 [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=tel_dc [Producer.MuPix8] ThPix = 144 #lazyFrog = -25 #register_value = 0 #EUDAQ_DC = tel_dc [Producer.keithleyPS] voltage = -200 max_current = 5e-6 [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default [Producer.keithleyPS] voltage = -200 max_current = 5e-6
327	Fri Apr 26 15:15:02 2024	tb-crew	rotation 10deg	299	W3 NIKHEF	unirradiated	4.2	Unknown	26.04.2024 14:16:24	26.04.2024 15:15:21	58
automatic log for run 299 Comment: telepix adjustment
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 0.94 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 15 00 01 0 0 0 0 3 00 02 0 0 0 0 11 00 03 0 0 0 0 15 00 04 0 0 0 0 7 00 05 0 0 0 0 6 00 06 0 0 0 0 15 00 07 0 0 0 0 8 00 08 0 0 0 0 11 00 09 0 0 0 0 8 00 10 0 0 0 0 7 00 11 0 0 0 0 10 00 12 0 0 0 0 5 00 13 0 0 0 0 15 00 14 0 0 0 0 15 00 15 0 0 0 0 14 00 16 0 0 0 0 7 00 17 0 0 0 0 11 00 18 0 0 0 0 15 00 19 0 0 0 0 10 00 20 0 0 0 0 8 00 21 0 0 0 0 6 00 22 0 0 0 0 11 00 23 0 0 0 0 14 00 24 0 0 0 0 15 00 25 0 0 0 0 14 00 26 0 0 0 0 15 00 27 0 0 0 0 14 00 28 0 0 0 0 5 00 29 0 0 0 0 10 00 30 0 0 0 0 3 00 31 0 0 0 0 9 00 32 0 0 0 0 2 00 33 0 0 0 0 6 00 34 0 0 0 0 9 00 35 0 0 0 0 15 00 36 0 0 0 0 0 00 37 0 0 0 0 5 00 38 0 0 0 0 14 00 39 0 0 0 0 15 00 40 0 0 0 0 5 00 41 0 0 0 0 12 00 42 0 0 0 0 9 00 43 0 0 0 0 15 00 44 0 0 0 0 13 00 45 0 0 0 0 9 00 46 0 0 0 0 5 00 47 0 0 0 0 11 00 48 0 0 0 0 8 00 49 0 0 0 0 5 00 50 0 0 0 0 2 00 51 0 0 0 0 0 00 52 0 0 0 0 10 00 53 0 0 0 0 10 00 54 0 0 0 0 12 00 55 1 0 0 0 10 00 56 0 0 0 0 9 00 57 0 0 0 0 0 00 58 0 0 0 0 2 00 59 0 0 0 0 11 00 60 0 0 0 0 8 00 61 0 0 0 0 6 00 62 0 0 0 0 15 00 63 0 0 0 0 15 01 00 0 0 0 0 7 01 01 0 0 0 0 6 01 02 0 0 0 0 1 01 03 0 0 0 0 11 01 04 0 0 0 0 13 01 05 0 0 0 0 12 01 06 0 0 0 0 15 01 07 0 0 0 0 11 01 08 0 0 0 0 8 01 09 0 0 0 0 9 01 10 0 0 0 0 15 01 11 0 0 0 0 15 01 12 0 0 0 0 8 01 13 0 0 0 0 14 01 14 0 0 0 0 15 01 15 0 0 0 0 12 01 16 0 0 0 0 11 01 17 0 0 0 0 6 01 18 0 0 0 0 0 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 14 01 22 0 0 0 0 5 01 23 0 0 0 0 6 01 24 0 0 0 0 8 01 25 0 0 0 0 15 01 26 0 0 0 0 3 01 27 0 0 0 0 9 01 28 0 0 0 0 10 01 29 0 0 0 0 3 01 30 0 0 0 0 11 01 31 0 0 0 0 12 01 32 0 0 0 0 8 01 33 0 0 0 0 4 01 34 0 0 0 0 13 01 35 0 0 0 0 10 01 36 0 0 0 0 9 01 37 0 0 0 0 7 01 38 0 0 0 0 8 01 39 0 0 0 0 13 01 40 0 0 0 0 1 01 41 0 0 0 0 13 01 42 0 0 0 0 4 01 43 0 0 0 0 5 01 44 0 0 0 0 11 01 45 0 0 0 0 9 01 46 0 0 0 0 9 01 47 0 0 0 0 9 01 48 0 0 0 0 8 01 49 0 0 0 0 10 01 50 0 0 0 0 9 01 51 0 0 0 0 10 01 52 0 0 0 0 5 01 53 0 0 0 0 15 01 54 0 0 0 0 3 01 55 0 0 0 0 0 01 56 0 0 0 0 13 01 57 0 0 0 0 2 01 58 0 0 0 0 11 01 59 0 0 0 0 6 01 60 0 0 0 0 3 01 61 0 0 0 0 10 01 62 0 0 0 0 11 01 63 0 0 0 0 7 02 00 0 0 0 0 13 02 01 0 0 0 0 5 02 02 0 0 0 0 15 02 03 0 0 0 0 5 02 04 0 0 0 0 14 02 05 0 0 0 0 6 02 06 0 0 0 0 7 02 07 0 0 0 0 12 02 08 0 0 0 0 15 02 09 0 0 0 0 4 02 10 0 0 0 0 12 02 11 0 0 0 0 13 02 12 0 0 0 0 15 02 13 0 0 0 0 9 02 14 0 0 0 0 8 02 15 0 0 0 0 12 02 16 0 0 0 0 12 02 17 0 0 0 0 10 02 18 0 0 0 0 3 02 19 0 0 0 0 13 02 20 0 0 0 0 12 02 21 0 0 0 0 2 02 22 0 0 0 0 8 02 23 0 0 0 0 2 02 24 0 0 0 0 15 02 25 0 0 0 0 10 02 26 0 0 0 0 3 02 27 0 0 0 0 9 02 28 0 0 0 0 14 02 29 0 0 0 0 5 02 30 0 0 0 0 4 02 31 0 0 0 0 4 02 32 0 0 0 0 15 02 33 0 0 0 0 12 02 34 0 0 0 0 15 02 35 0 0 0 0 15 02 36 0 0 0 0 15 02 37 0 0 0 0 7 02 38 0 0 0 0 15 02 39 0 0 0 0 1 02 40 0 0 0 0 14 02 41 0 0 0 0 12 02 42 0 0 0 0 7 02 43 0 0 0 0 14 02 44 0 0 0 0 10 02 45 1 0 0 0 11 02 46 0 0 0 0 1 02 47 0 0 0 0 15 02 48 0 0 0 0 4 02 49 0 0 0 0 10 02 50 0 0 0 0 4 02 51 0 0 0 0 10 02 52 0 0 0 0 14 02 53 0 0 0 0 4 02 54 0 0 0 0 11 02 55 0 0 0 0 4 02 56 0 0 0 0 9 02 57 0 0 0 0 4 02 58 0 0 0 0 9 02 59 0 0 0 0 14 02 60 0 0 0 0 12 02 61 0 0 0 0 15 02 62 0 0 0 0 9 02 63 0 0 0 0 13 03 00 0 0 0 0 8 03 01 0 0 0 0 2 03 02 0 0 0 0 15 03 03 0 0 0 0 15 03 04 0 0 0 0 15 03 05 0 0 0 0 4 03 06 0 0 0 0 6 03 07 0 0 0 0 0 03 08 0 0 0 0 15 03 09 0 0 0 0 11 03 10 0 0 0 0 15 03 11 0 0 0 0 15 03 12 0 0 0 0 4 03 13 0 0 0 0 13 03 14 0 0 0 0 8 03 15 0 0 0 0 13 03 16 0 0 0 0 8 03 17 0 0 0 0 7 03 18 0 0 0 0 3 03 19 0 0 0 0 2 03 20 0 0 0 0 13 03 21 0 0 0 0 2 03 22 0 0 0 0 0 03 23 0 0 0 0 5 03 24 0 0 0 0 0 03 25 0 0 0 0 3 03 26 0 0 0 0 9 03 27 0 0 0 0 14 03 28 0 0 0 0 15 03 29 0 0 0 0 15 03 30 0 0 0 0 0 03 31 0 0 0 0 14 03 32 0 0 0 0 12 03 33 0 0 0 0 7 03 34 0 0 0 0 7 03 35 0 0 0 0 7 03 36 0 0 0 0 4 03 37 0 0 0 0 10 03 38 0 0 0 0 2 03 39 0 0 0 0 5 03 40 0 0 0 0 1 03 41 0 0 0 0 15 03 42 0 0 0 0 3 03 43 0 0 0 0 2 03 44 0 0 0 0 3 03 45 0 0 0 0 9 03 46 0 0 0 0 8 03 47 0 0 0 0 9 03 48 0 0 0 0 1 03 49 0 0 0 0 9 03 50 0 0 0 0 6 03 51 0 0 0 0 13 03 52 0 0 0 0 15 03 53 0 0 0 0 6 03 54 0 0 0 0 15 03 55 0 0 0 0 8 03 56 0 0 0 0 3 03 57 0 0 0 0 11 03 58 0 0 0 0 7 03 59 0 0 0 0 15 03 60 0 0 0 0 15 03 61 0 0 0 0 3 03 62 0 0 0 0 9 03 63 0 0 0 0 4 04 00 0 0 0 0 12 04 01 0 0 0 0 15 04 02 0 0 0 0 14 04 03 0 0 0 0 9 04 04 0 0 0 0 10 04 05 0 0 0 0 14 04 06 0 0 0 0 4 04 07 0 0 0 0 14 04 08 0 0 0 0 14 04 09 0 0 0 0 13 04 10 0 0 0 0 15 04 11 0 0 0 0 15 04 12 0 0 0 0 4 04 13 0 0 0 0 10 04 14 0 0 0 0 11 04 15 0 0 0 0 5 04 16 0 0 0 0 4 04 17 0 0 0 0 12 04 18 0 0 0 0 10 04 19 0 0 0 0 9 04 20 0 0 0 0 4 04 21 0 0 0 0 14 04 22 0 0 0 0 4 04 23 0 0 0 0 13 04 24 0 0 0 0 13 04 25 0 0 0 0 12 04 26 0 0 0 0 12 04 27 0 0 0 0 15 04 28 0 0 0 0 7 04 29 0 0 0 0 14 04 30 0 0 0 0 15 04 31 0 0 0 0 8 04 32 0 0 0 0 13 04 33 0 0 0 0 10 04 34 0 0 0 0 8 04 35 0 0 0 0 12 04 36 0 0 0 0 14 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V= 0.8 #0.6363 #Szinti 4x4cm #PMT2_V= 0.85 #0.6363 #Szinti 4x4cm #PMT3_V= 0.8 #PMT4_V= 0.0 ## TRIGGER CONFIGURATION # 2 words 32bit: Hi + Lo # combinations of coincidence are now possible! # Triggering on concidence of scintillator & telepix trigMaskLo = 0x00000002 #trigMaskLo = 0x00000040 # 0 and 2 trigMaskHi = 0x00000000 # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 1 in1_DEL = 0 in2_STR = 0x3F in2_DEL = 0 in3_STR = 1 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # trigger on rising (0) / falling (1) edge of the trigger input # Here: all falling edge (scinti), but channel 0 rising edge (Telepix) trigPol = 0x3E # 111110 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 #-0.012 DACThreshold1 = -0.04 #-0.012 DACThreshold2 = -0.04 DACThreshold3 = +0.5 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [DataCollector.tel_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] voltage_key = "th" voltage_value = 0.94 [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=tel_dc [Producer.MuPix8] ThPix = 144 #lazyFrog = -25 #register_value = 0 #EUDAQ_DC = tel_dc [Producer.keithleyPS] voltage = -10 max_current = 100e-6 [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
20	Mon Apr 22 18:04:35 2024	tb-crew	basic "best" threshold / HV settings	7	Wxxx topside	unirradiated	4.2	Unknown	22.04.2024 17:11:47	22.04.2024 18:04:51	53
automatic log for run 7 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = .92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V= 0.8 #0.6363 #Szinti 4x4cm #PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION # 2 words 32bit: Hi + Lo trigMaskHi = 0x00000000 # combinations of coincidence are now possible! # Triggering on concidence of scintillator & telepix #trigMaskLo = 0x00000020 # 0 and 2 #trigMaskLo = 0x00000001 # 0 only # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 1 in1_DEL = 0 in2_STR = 0x3F in2_DEL = 0 in3_STR = 1 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # trigger on rising (0) / falling (1) edge of the trigger input # Here: all falling edge (scinti) channel 3 rising edge (Telepix) #trigPol = 0x3B # 111011 trigPol = 0x3E # 111110 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.5 #-0.012 DACThreshold1 = -0.1 #-0.012 DACThreshold2 = -0.5 DACThreshold3 = +0.5 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xB # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xDD # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [DataCollector.tel_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] voltage_key = "th" voltage_value = 0.92 [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=tel_dc [Producer.MuPix8] ThPix = 144 #lazyFrog = -25 #register_value = 0 #EUDAQ_DC = tel_dc [Producer.keithleyPS] voltage = -200 max_current = 5e-6 [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default [Producer.keithleyPS] voltage = -200 max_current = 5e-6
221	Wed Apr 24 18:34:18 2024	tb-crew	"best" settings	202	Wxxx backside	unirradiated	4.2	Unknown	24.04.2024 17:42:13	24.04.2024 18:34:36	52
automatic log for run 202 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = .94 th__i = 3
Attachment 2: matrix_mpw4.txt
0 0 0 0 0 0 10 0 1 0 0 0 0 8 0 2 0 0 0 0 15 0 3 0 0 0 0 6 0 4 0 0 0 0 8 0 5 0 0 0 0 5 0 6 0 0 0 0 15 0 7 0 0 0 0 8 0 8 0 0 0 0 6 0 9 0 0 0 0 8 0 10 0 0 0 0 14 0 11 0 0 0 0 9 0 12 0 0 0 0 14 0 13 0 0 0 0 6 0 14 0 0 0 0 14 0 15 0 0 0 0 8 0 16 0 0 0 0 10 0 17 0 0 0 0 14 0 18 0 0 0 0 10 0 19 0 0 0 0 8 0 20 0 0 0 0 11 0 21 0 0 0 0 6 0 22 0 0 0 0 7 0 23 0 0 0 0 7 0 24 0 0 0 0 15 0 25 0 0 0 0 14 0 26 0 0 0 0 5 0 27 0 0 0 0 12 0 28 0 0 0 0 6 0 29 0 0 0 0 6 0 30 0 0 0 0 12 0 31 0 0 0 0 13 0 32 0 0 0 0 15 0 33 0 0 0 0 8 0 34 0 0 0 0 12 0 35 0 0 0 0 12 0 36 0 0 0 0 8 0 37 0 0 0 0 11 0 38 0 0 0 0 2 0 39 0 0 0 0 7 0 40 0 0 0 0 2 0 41 0 0 0 0 13 0 42 0 0 0 0 13 0 43 0 0 0 0 12 0 44 0 0 0 0 12 0 45 0 0 0 0 2 0 46 0 0 0 0 7 0 47 0 0 0 0 12 0 48 0 0 0 0 3 0 49 0 0 0 0 10 0 50 0 0 0 0 9 0 51 0 0 0 0 8 0 52 0 0 0 0 7 0 53 0 0 0 0 8 0 54 0 0 0 0 9 0 55 1 0 0 0 3 0 56 0 0 0 0 15 0 57 0 0 0 0 12 0 58 0 0 0 0 9 0 59 0 0 0 0 6 0 60 0 0 0 0 11 0 61 0 0 0 0 8 0 62 0 0 0 0 6 0 63 0 0 0 0 6 1 0 0 0 0 0 11 1 1 0 0 0 0 10 1 2 0 0 0 0 15 1 3 0 0 0 0 9 1 4 0 0 0 0 10 1 5 0 0 0 0 7 1 6 0 0 0 0 8 1 7 0 0 0 0 12 1 8 0 0 0 0 9 1 9 0 0 0 0 12 1 10 0 0 0 0 8 1 11 0 0 0 0 15 1 12 0 0 0 0 12 1 13 0 0 0 0 9 1 14 0 0 0 0 6 1 15 0 0 0 0 8 1 16 0 0 0 0 3 1 17 0 0 0 0 15 1 18 0 0 0 0 1 1 19 0 0 0 0 5 1 20 0 0 0 0 0 1 21 0 0 0 0 11 1 22 0 0 0 0 3 1 23 0 0 0 0 10 1 24 0 0 0 0 7 1 25 0 0 0 0 15 1 26 0 0 0 0 8 1 27 0 0 0 0 11 1 28 0 0 0 0 5 1 29 0 0 0 0 8 1 30 0 0 0 0 12 1 31 0 0 0 0 10 1 32 0 0 0 0 0 1 33 0 0 0 0 1 1 34 0 0 0 0 15 1 35 0 0 0 0 11 1 36 0 0 0 0 8 1 37 0 0 0 0 10 1 38 0 0 0 0 15 1 39 0 0 0 0 6 1 40 0 0 0 0 8 1 41 0 0 0 0 5 1 42 0 0 0 0 8 1 43 0 0 0 0 11 1 44 0 0 0 0 3 1 45 0 0 0 0 3 1 46 0 0 0 0 12 1 47 0 0 0 0 6 1 48 0 0 0 0 0 1 49 0 0 0 0 8 1 50 0 0 0 0 8 1 51 0 0 0 0 3 1 52 0 0 0 0 12 1 53 0 0 0 0 9 1 54 0 0 0 0 10 1 55 0 0 0 0 6 1 56 0 0 0 0 12 1 57 0 0 0 0 13 1 58 0 0 0 0 8 1 59 0 0 0 0 13 1 60 0 0 0 0 6 1 61 0 0 0 0 6 1 62 0 0 0 0 4 1 63 0 0 0 0 5 2 0 0 0 0 0 15 2 1 0 0 0 0 12 2 2 0 0 0 0 12 2 3 0 0 0 0 9 2 4 0 0 0 0 8 2 5 0 0 0 0 13 2 6 0 0 0 0 12 2 7 0 0 0 0 13 2 8 0 0 0 0 15 2 9 0 0 0 0 10 2 10 0 0 0 0 8 2 11 0 0 0 0 10 2 12 0 0 0 0 11 2 13 0 0 0 0 15 2 14 0 0 0 0 12 2 15 0 0 0 0 11 2 16 0 0 0 0 15 2 17 0 0 0 0 9 2 18 0 0 0 0 8 2 19 0 0 0 0 8 2 20 0 0 0 0 9 2 21 0 0 0 0 8 2 22 0 0 0 0 10 2 23 0 0 0 0 2 2 24 0 0 0 0 11 2 25 0 0 0 0 9 2 26 0 0 0 0 15 2 27 0 0 0 0 15 2 28 0 0 0 0 15 2 29 0 0 0 0 8 2 30 0 0 0 0 0 2 31 0 0 0 0 12 2 32 0 0 0 0 10 2 33 0 0 0 0 12 2 34 0 0 0 0 12 2 35 0 0 0 0 10 2 36 0 0 0 0 7 2 37 0 0 0 0 1 2 38 0 0 0 0 13 2 39 0 0 0 0 15 2 40 0 0 0 0 8 2 41 0 0 0 0 7 2 42 0 0 0 0 8 2 43 0 0 0 0 13 2 44 0 0 0 0 0 2 45 1 0 0 0 2 2 46 0 0 0 0 10 2 47 0 0 0 0 0 2 48 0 0 0 0 10 2 49 0 0 0 0 10 2 50 0 0 0 0 9 2 51 0 0 0 0 15 2 52 0 0 0 0 7 2 53 0 0 0 0 13 2 54 0 0 0 0 11 2 55 0 0 0 0 15 2 56 0 0 0 0 7 2 57 0 0 0 0 8 2 58 0 0 0 0 13 2 59 0 0 0 0 11 2 60 0 0 0 0 10 2 61 0 0 0 0 10 2 62 0 0 0 0 11 2 63 0 0 0 0 9 3 0 0 0 0 0 15 3 1 0 0 0 0 8 3 2 0 0 0 0 11 3 3 0 0 0 0 9 3 4 0 0 0 0 15 3 5 0 0 0 0 7 3 6 0 0 0 0 12 3 7 0 0 0 0 15 3 8 0 0 0 0 11 3 9 0 0 0 0 8 3 10 0 0 0 0 6 3 11 0 0 0 0 13 3 12 0 0 0 0 15 3 13 0 0 0 0 0 3 14 0 0 0 0 15 3 15 0 0 0 0 15 3 16 0 0 0 0 12 3 17 0 0 0 0 6 3 18 0 0 0 0 10 3 19 0 0 0 0 7 3 20 0 0 0 0 0 3 21 0 0 0 0 6 3 22 0 0 0 0 10 3 23 0 0 0 0 4 3 24 0 0 0 0 8 3 25 0 0 0 0 9 3 26 0 0 0 0 11 3 27 0 0 0 0 5 3 28 0 0 0 0 5 3 29 0 0 0 0 0 3 30 0 0 0 0 7 3 31 0 0 0 0 8 3 32 0 0 0 0 8 3 33 0 0 0 0 12 3 34 0 0 0 0 12 3 35 0 0 0 0 6 3 36 0 0 0 0 13 3 37 0 0 0 0 11 3 38 0 0 0 0 5 3 39 0 0 0 0 3 3 40 0 0 0 0 5 3 41 0 0 0 0 7 3 42 0 0 0 0 8 3 43 0 0 0 0 2 3 44 0 0 0 0 8 3 45 0 0 0 0 10 3 46 0 0 0 0 15 3 47 0 0 0 0 15 3 48 0 0 0 0 1 3 49 0 0 0 0 6 3 50 0 0 0 0 10 3 51 0 0 0 0 14 3 52 0 0 0 0 6 3 53 0 0 0 0 8 3 54 0 0 0 0 10 3 55 0 0 0 0 13 3 56 0 0 0 0 9 3 57 0 0 0 0 10 3 58 0 0 0 0 3 3 59 0 0 0 0 8 3 60 0 0 0 0 9 3 61 0 0 0 0 8 3 62 0 0 0 0 11 3 63 0 0 0 0 10 4 0 0 0 0 0 13 4 1 0 0 0 0 10 4 2 0 0 0 0 8 4 3 0 0 0 0 10 4 4 0 0 0 0 8 4 5 0 0 0 0 12 4 6 0 0 0 0 15 4 7 0 0 0 0 15 4 8 0 0 0 0 7 4 9 0 0 0 0 13 4 10 0 0 0 0 9 4 11 0 0 0 0 15 4 12 0 0 0 0 5 4 13 0 0 0 0 10 4 14 0 0 0 0 15 4 15 0 0 0 0 5 4 16 0 0 0 0 6 4 17 0 0 0 0 7 4 18 0 0 0 0 4 4 19 0 0 0 0 7 4 20 0 0 0 0 6 4 21 0 0 0 0 12 4 22 0 0 0 0 10 4 23 0 0 0 0 7 4 24 0 0 0 0 8 4 25 0 0 0 0 14 4 26 0 0 0 0 11 4 27 0 0 0 0 14 4 28 0 0 0 0 5 4 29 0 0 0 0 9 4 30 0 0 0 0 11 4 31 0 0 0 0 10 4 32 0 0 0 0 6 4 33 0 0 0 0 15 4 34 0 0 0 0 0 4 35 0 0 0 0 14 4 36 0 0 0 0 13 4 37 0 0 0 0 8 4 38 0 0 0 0 10 4 39 0 0 0 0 2 4 40 0 0 0 0 9 4 41 0 0 0 0 13 4 42 0 0 0 0 8 4 43 0 0 0 0 5 ... 3796 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V= 0.8 #0.6363 #Szinti 4x4cm #PMT2_V= 0.85 #0.6363 #Szinti 4x4cm #PMT3_V= 0.8 #PMT4_V= 0.0 ## TRIGGER CONFIGURATION # 2 words 32bit: Hi + Lo # combinations of coincidence are now possible! # Triggering on concidence of scintillator & telepix trigMaskLo = 0x00000002 #trigMaskLo = 0x00000040 # 0 and 2 trigMaskHi = 0x00000000 # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 1 in1_DEL = 0 in2_STR = 0x3F in2_DEL = 0 in3_STR = 1 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # trigger on rising (0) / falling (1) edge of the trigger input # Here: all falling edge (scinti), but channel 0 rising edge (Telepix) trigPol = 0x3E # 111110 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 #-0.012 DACThreshold1 = -0.04 #-0.012 DACThreshold2 = -0.04 DACThreshold3 = +0.5 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [DataCollector.tel_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] voltage_key = "th" voltage_value = 0.94 [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=tel_dc [Producer.MuPix8] ThPix = 144 #lazyFrog = -25 #register_value = 0 #EUDAQ_DC = tel_dc [Producer.keithleyPS] voltage = -210 max_current = 15e-6 [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
14	Mon Apr 22 16:29:46 2024	tb-crew	1t tests	4	Wxxx topside	unirradiated	4.2	Unknown	22.04.2024 16:24:21	22.04.2024 16:30:02	5
automatic log for run 4 Comment: Correlations seen (firsttry )
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = .92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V= 0.8 #0.6363 #Szinti 4x4cm #PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION # 2 words 32bit: Hi + Lo trigMaskHi = 0x00000000 # combinations of coincidence are now possible! # Triggering on concidence of scintillator & telepix #trigMaskLo = 0x00000020 # 0 and 2 #trigMaskLo = 0x00000001 # 0 only # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 1 in1_DEL = 0 in2_STR = 0x3F in2_DEL = 0 in3_STR = 1 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # trigger on rising (0) / falling (1) edge of the trigger input # Here: all falling edge (scinti) channel 3 rising edge (Telepix) #trigPol = 0x3B # 111011 trigPol = 0x3E # 111110 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.5 #-0.012 DACThreshold1 = -0.1 #-0.012 DACThreshold2 = -0.5 DACThreshold3 = +0.5 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xB # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xDD # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xF #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [DataCollector.tel_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] voltage_key = "th" voltage_value = 0.92 [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=tel_dc [Producer.MuPix8] ThPix = 144 #lazyFrog = -25 #register_value = 0 #EUDAQ_DC = tel_dc [Producer.keithleyPS] voltage = -200 max_current = 5e-6 [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 500 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default [Producer.keithleyPS] voltage = -200 max_current = 5e-6
34	Tue Apr 23 09:28:35 2024	tb-crew	basic "best" threshold / HV settings	17	Wxxx topside	unirradiated	4.2	Unknown	23.04.2024 09:23:05	23.04.2024 09:28:52	5
automatic log for run 17 Comment: not ignoring DUT0 (telepix)
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = .92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V= 0.8 #0.6363 #Szinti 4x4cm #PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION # 2 words 32bit: Hi + Lo trigMaskHi = 0x00000000 # combinations of coincidence are now possible! # Triggering on concidence of scintillator & telepix #trigMaskLo = 0x00000020 # 0 and 2 #trigMaskLo = 0x00000001 # 0 only # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 1 in1_DEL = 0 in2_STR = 0x3F in2_DEL = 0 in3_STR = 1 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # trigger on rising (0) / falling (1) edge of the trigger input # Here: all falling edge (scinti) channel 3 rising edge (Telepix) #trigPol = 0x3B # 111011 trigPol = 0x3E # 111110 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.5 #-0.012 DACThreshold1 = -0.1 #-0.012 DACThreshold2 = -0.5 DACThreshold3 = +0.5 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xB # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xDD # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xE #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [DataCollector.tel_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] voltage_key = "th" voltage_value = 0.92 [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=tel_dc [Producer.MuPix8] ThPix = 144 #lazyFrog = -25 #register_value = 0 #EUDAQ_DC = tel_dc [Producer.keithleyPS] voltage = -200 max_current = 5e-6 [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default [Producer.keithleyPS] voltage = -200 max_current = 5e-6
48	Tue Apr 23 13:05:00 2024	tb-crew	basic "best" threshold / HV settings	31	Wxxx topside	unirradiated	4.2	Unknown	23.04.2024 12:59:27	23.04.2024 13:05:17	5
automatic log for run 31 Comment: not ignoring anything an triggering on Telepix, Correlations still fine though...
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = .92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.85 #0.6363 #Szinti 4x4cm PMT3_V= 0.8 PMT4_V= 0.0 ## TRIGGER CONFIGURATION # 2 words 32bit: Hi + Lo # combinations of coincidence are now possible! # Triggering on concidence of scintillator & telepix #trigMaskLo = 0x00000002 trigMaskLo = 0x00000040 # 0 and 2 trigMaskHi = 0x00000000 # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 0x3F # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 1 in1_DEL = 0 in2_STR = 0x3F in2_DEL = 0 in3_STR = 1 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # trigger on rising (0) / falling (1) edge of the trigger input # Here: all falling edge (scinti) channel 3 rising edge (Telepix) #trigPol = 0x3B # 111011 trigPol = 0x3E # 111110 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 #-0.012 DACThreshold1 = -0.04 #-0.012 DACThreshold2 = -0.04 DACThreshold3 = +0.5 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/tlu/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [DataCollector.tel_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN=/data1/rd50-mpw4/adenium/adenium_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] voltage_key = "th" voltage_value = 0.92 [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=tel_dc [Producer.MuPix8] ThPix = 144 #lazyFrog = -25 #register_value = 0 #EUDAQ_DC = tel_dc [Producer.keithleyPS] voltage = -200 max_current = 5e-6 [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default [Producer.keithleyPS] voltage = -200 max_current = 5e-6

Goto page 1, 2, 3 ... 26, 27, 28 Next

ELOG V3.1.5-fc6679b