# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". 
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"


[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.8
PMT4_V= 0.8

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 # 0x00000008 Koinzidenz 1+2 ; 0x00000040 Koinzidenz 2+3
in0_STR = 0	# 0 
in0_DEL = 0	# 18
in1_STR = 0	# 0
in1_DEL = 0	# 18
in2_STR = 0	# 0
in2_DEL = 0 	# 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.025 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
#DUTMask= 0x6

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x30 #0x00

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0xF #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1


# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc

## TLU MONITOR PARAMETER
FileComment="Mixed_beam_07_26"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1



[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing

[Producer.elog1]

run_name,angle,x_pos,y_pos,cumulative_filesize,timestamp,comment
run021,0,56,69.5,7.5,2026-07-12 01:30:43,mixed_beam_setup
run022,0,56,71.5,4,2026-07-12 01:40:04,mixed_beam_setup
run023,0,56,73.5,4,2026-07-12 02:04:29,mixed_beam_setup
run024,0,56,75.5,4,2026-07-12 02:21:24,mixed_beam_setup
run025,0,56,77.5,4,2026-07-12 02:36:52,mixed_beam_setup
run026,0,60,69.5,4,2026-07-12 02:47:16,mixed_beam_setup
run027,0,60,71.5,1,2026-07-12 02:49:38,mixed_beam_setup
run028,0,60,73.5,1,2026-07-12 02:51:40,mixed_beam_setup
run029,0,60,75.5,1,2026-07-12 02:53:42,mixed_beam_setup
run030,0,60,77.5,1,2026-07-12 02:55:42,mixed_beam_setup
run031,0,64,69.5,1,2026-07-12 02:57:47,mixed_beam_setup
run032,0,64,71.5,1,2026-07-12 03:00:12,mixed_beam_setup
run033,0,64,73.5,1,2026-07-12 03:02:38,mixed_beam_setup
run034,0,64,75.5,1,2026-07-12 03:04:42,mixed_beam_setup
run035,0,64,77.5,1,2026-07-12 03:06:40,mixed_beam_setup
run036,0,68,69.5,1,2026-07-12 03:08:44,mixed_beam_setup
run037,0,68,71.5,1,2026-07-12 03:11:13,mixed_beam_setup
run038,0,68,73.5,1,2026-07-12 03:13:40,mixed_beam_setup
run039,0,68,75.5,1,2026-07-12 03:15:42,mixed_beam_setup
run040,0,68,77.5,1,2026-07-12 03:18:04,mixed_beam_setup
run041,0,72,69.5,1,2026-07-12 03:20:37,mixed_beam_setup
run042,0,72,71.5,1,2026-07-12 03:23:05,mixed_beam_setup
run043,0,72,73.5,1,2026-07-12 03:33:16,mixed_beam_setup
run044,0,72,75.5,1,2026-07-12 03:35:16,mixed_beam_setup
run045,0,72,77.5,1,2026-07-12 03:37:19,mixed_beam_setup
run046,0,76,69.5,1,2026-07-12 03:39:18,mixed_beam_setup
run047,0,76,71.5,1,2026-07-12 03:44:47,mixed_beam_setup
run048,0,76,73.5,1,2026-07-12 03:46:46,mixed_beam_setup
run049,0,76,75.5,1,2026-07-12 03:49:10,mixed_beam_setup
run050,0,76,77.5,1,2026-07-12 03:51:41,mixed_beam_setup
run051,0,80,69.5,1,2026-07-12 03:53:47,mixed_beam_setup
run052,0,80,71.5,1,2026-07-12 03:55:18,mixed_beam_setup
run053,0,80,73.5,1,2026-07-12 03:57:10,mixed_beam_setup
run054,0,80,75.5,1,2026-07-12 03:58:44,mixed_beam_setup
run055,0,80,77.5,1,2026-07-12 04:00:39,mixed_beam_setup
run056,0,84,69.5,1,2026-07-12 04:02:43,mixed_beam_setup
run057,0,84,71.5,1,2026-07-12 04:04:39,mixed_beam_setup
run058,0,84,73.5,1,2026-07-12 04:06:37,mixed_beam_setup
run059,0,84,75.5,1,2026-07-12 04:08:12,mixed_beam_setup
run060,0,84,77.5,1,2026-07-12 04:09:42,mixed_beam_setup
run061,0,88,69.5,1,2026-07-12 04:11:41,mixed_beam_setup
run062,0,88,71.5,1,2026-07-12 04:13:40,mixed_beam_setup
run063,0,88,73.5,1,2026-07-12 04:27:51,mixed_beam_setup
run064,0,88,75.5,1,2026-07-12 04:29:48,mixed_beam_setup
run065,0,88,77.5,1,2026-07-12 04:31:48,mixed_beam_setup
run066,0,92,69.5,1,2026-07-12 04:34:16,mixed_beam_setup
run067,0,92,71.5,1,2026-07-12 04:40:48,mixed_beam_setup
run068,0,92,73.5,1,2026-07-12 04:42:47,mixed_beam_setup
run069,0,92,75.5,1,2026-07-12 04:44:47,mixed_beam_setup
run070,0,92,77.5,1,2026-07-12 04:46:21,mixed_beam_setup
run071,0,96,69.5,1,2026-07-12 04:48:20,mixed_beam_setup
run072,0,96,71.5,1,2026-07-12 04:50:19,mixed_beam_setup
run073,0,96,73.5,1,2026-07-12 04:52:19,mixed_beam_setup
run074,0,96,75.5,1,2026-07-12 04:54:19,mixed_beam_setup
run075,0,96,77.5,1,2026-07-12 04:56:20,mixed_beam_setup
run076,0,100,69.5,1,2026-07-12 04:58:20,mixed_beam_setup
run077,0,100,71.5,1,2026-07-12 05:00:18,mixed_beam_setup
run078,0,100,73.5,1,2026-07-12 05:02:14,mixed_beam_setup
run079,0,100,75.5,1,2026-07-12 05:04:14,mixed_beam_setup
run080,0,100,77.5,1,2026-07-12 05:05:51,mixed_beam_setup
run081,0,56,69.5,1,2026-07-12 05:20:29,mixed_beam_setup_1mm
run082,0,56,71.5,1,2026-07-12 05:23:06,mixed_beam_setup_1mm
run083,0,56,73.5,1,2026-07-12 05:25:34,mixed_beam_setup_1mm
run084,0,56,75.5,1,2026-07-12 05:27:36,mixed_beam_setup_1mm
run085,0,56,77.5,1,2026-07-12 05:29:34,mixed_beam_setup_1mm
run086,0,60,69.5,1,2026-07-12 05:32:28,mixed_beam_setup_1mm
run087,0,60,71.5,1,2026-07-12 05:34:40,mixed_beam_setup_1mm
run088,0,60,73.5,1,2026-07-12 05:36:46,mixed_beam_setup_1mm
run089,0,60,75.5,1,2026-07-12 05:38:43,mixed_beam_setup_1mm
run090,0,60,77.5,1,2026-07-12 05:41:07,mixed_beam_setup_1mm