Home CMS Production Clean room MedAustron HEPHY testbeams old
testbeam-MA2018 testbeam-MA2019 testbeam-MA2020 testbeam-MA2021 testbeam-MA2023 testbeam-MA2024
  Testbeams at MedAustron in 2024, Page 9 of 11  Not logged in ELOG logo
 Find |  Login |  Help 
New entries since:Thu Jan 1 01:00:00 1970
 Full | Summary | Threaded | Hide attachments  Show all entries    217 Entries 
Goto page Previous  1, 2, 3 ... 8, 9, 10, 11   Next  All
ID Date Author Subject Run Number DUT Beam Energy Rate Setting Particle Type Data t-Start t-Stop Duration_mindown Frontend Phantom Phantom thickness
  102   Sun Aug 25 06:34:56 2024 tb-crewPiggy test44RD50-MPW4800 MeVLow Flux LowProtonUnknown25.08.2024 06:35:1325.08.2024 06:35:230Normal  
automatic log for run 44
Comment:
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = cBase
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_base.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 4
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0.7
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 1.15
th__i = 3


[RD50_MPW4_Piggy]
this_config_file = config.cfg
#SEC::MISC
calib_file = cPiggy
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 0
execute_file = execute.txt
i2c_addr = 0x47
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_piggy.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 4
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt 
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} 

# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1 
00 00 0 0 0 0 15 
00 01 0 0 0 0 0 
00 02 0 0 0 0 15 
00 03 0 0 0 0 13 
00 04 0 0 0 0 11 
00 05 0 0 0 0 15 
00 06 0 0 0 0 15 
00 07 0 0 0 0 8 
00 08 0 0 0 0 0 
00 09 0 0 0 0 15 
00 10 0 0 0 0 8 
00 11 0 0 0 0 7 
00 12 0 0 0 0 15 
00 13 0 0 0 0 0 
00 14 0 0 0 0 8 
00 15 0 0 0 0 4 
00 16 0 0 0 0 3 
00 17 0 0 0 0 15 
00 18 0 0 0 0 15 
00 19 0 0 0 0 15 
00 20 0 0 0 0 0 
00 21 0 0 0 0 0 
00 22 0 0 0 0 15 
00 23 0 0 0 0 9 
00 24 0 0 0 0 15 
00 25 0 0 0 0 6 
00 26 0 0 0 0 0 
00 27 0 0 0 0 0 
00 28 0 0 0 0 14 
00 29 0 0 0 0 0 
00 30 0 0 0 0 7 
00 31 0 0 0 0 0 
00 32 0 0 0 0 12 
00 33 0 0 0 0 5 
00 34 0 0 0 0 15 
00 35 0 0 0 0 12 
00 36 0 0 0 0 15 
00 37 0 0 0 0 11 
00 38 0 0 0 0 0 
00 39 0 0 0 0 9 
00 40 0 0 0 0 15 
00 41 0 0 0 0 0 
00 42 0 0 0 0 15 
00 43 0 0 0 0 4 
00 44 0 0 0 0 1 
00 45 0 0 0 0 15 
00 46 0 0 0 0 1 
00 47 0 0 0 0 0 
00 48 0 0 0 0 0 
00 49 0 0 0 0 0 
00 50 0 0 0 0 0 
00 51 0 0 0 0 0 
00 52 0 0 0 0 15 
00 53 0 0 0 0 8 
00 54 0 0 0 0 11 
00 55 0 0 0 0 11 
00 56 0 0 0 0 15 
00 57 0 0 0 0 0 
00 58 0 0 0 0 4 
00 59 0 0 0 0 0 
00 60 0 0 0 0 12 
00 61 0 0 0 0 0 
00 62 0 0 0 0 15 
00 63 0 0 0 0 15 
01 00 0 0 0 0 15 
01 01 0 0 0 0 10 
01 02 0 0 0 0 15 
01 03 0 0 0 0 3 
01 04 0 0 0 0 7 
01 05 0 0 0 0 0 
01 06 0 0 0 0 5 
01 07 0 0 0 0 12 
01 08 0 0 0 0 11 
01 09 0 0 0 0 15 
01 10 0 0 0 0 8 
01 11 0 0 0 0 7 
01 12 0 0 0 0 14 
01 13 0 0 0 0 15 
01 14 0 0 0 0 14 
01 15 0 0 0 0 0 
01 16 0 0 0 0 0 
01 17 0 0 0 0 15 
01 18 0 0 0 0 1 
01 19 0 0 0 0 15 
01 20 0 0 0 0 6 
01 21 0 0 0 0 15 
01 22 0 0 0 0 0 
01 23 0 0 0 0 15 
01 24 0 0 0 0 0 
01 25 0 0 0 0 0 
01 26 0 0 0 0 6 
01 27 0 0 0 0 4 
01 28 0 0 0 0 0 
01 29 0 0 0 0 0 
01 30 0 0 0 0 0 
01 31 0 0 0 0 0 
01 32 0 0 0 0 10 
01 33 0 0 0 0 6 
01 34 0 0 0 0 15 
01 35 0 0 0 0 11 
01 36 0 0 0 0 4 
01 37 0 0 0 0 9 
01 38 0 0 0 0 15 
01 39 0 0 0 0 10 
01 40 0 0 0 0 12 
01 41 0 0 0 0 5 
01 42 0 0 0 0 15 
01 43 0 0 0 0 0 
01 44 0 0 0 0 5 
01 45 0 0 0 0 15 
01 46 0 0 0 0 10 
01 47 0 0 0 0 0 
01 48 0 0 0 0 0 
01 49 0 0 0 0 8 
01 50 0 0 0 0 15 
01 51 0 0 0 0 6 
01 52 0 0 0 0 4 
01 53 0 0 0 0 0 
01 54 0 0 0 0 15 
01 55 0 0 0 0 0 
01 56 0 0 0 0 10 
01 57 0 0 0 0 15 
01 58 0 0 0 0 0 
01 59 0 0 0 0 5 
01 60 0 0 0 0 8 
01 61 0 0 0 0 14 
01 62 0 0 0 0 11 
01 63 0 0 0 0 15 
02 00 0 0 0 0 3 
02 01 0 0 0 0 15 
02 02 0 0 0 0 15 
02 03 0 0 0 0 13 
02 04 0 0 0 0 15 
02 05 0 0 0 0 11 
02 06 0 0 0 0 15 
02 07 0 0 0 0 15 
02 08 0 0 0 0 15 
02 09 0 0 0 0 12 
02 10 0 0 0 0 11 
02 11 0 0 0 0 0 
02 12 0 0 0 0 7 
02 13 0 0 0 0 9 
02 14 0 0 0 0 11 
02 15 0 0 0 0 2 
02 16 0 0 0 0 15 
02 17 0 0 0 0 13 
02 18 0 0 0 0 12 
02 19 0 0 0 0 15 
02 20 0 0 0 0 15 
02 21 0 0 0 0 7 
02 22 0 0 0 0 2 
02 23 0 0 0 0 15 
02 24 0 0 0 0 10 
02 25 0 0 0 0 9 
02 26 0 0 0 0 7 
02 27 0 0 0 0 5 
02 28 0 0 0 0 15 
02 29 0 0 0 0 15 
02 30 0 0 0 0 14 
02 31 0 0 0 0 15 
02 32 0 0 0 0 13 
02 33 0 0 0 0 7 
02 34 0 0 0 0 0 
02 35 0 0 0 0 7 
02 36 0 0 0 0 1 
02 37 0 0 0 0 15 
02 38 0 0 0 0 3 
02 39 0 0 0 0 11 
02 40 0 0 0 0 7 
02 41 0 0 0 0 13 
02 42 0 0 0 0 4 
02 43 0 0 0 0 15 
02 44 0 0 0 0 0 
02 45 0 0 0 0 15 
02 46 0 0 0 0 15 
02 47 0 0 0 0 0 
02 48 0 0 0 0 8 
02 49 0 0 0 0 15 
02 50 0 0 0 0 0 
02 51 0 0 0 0 12 
02 52 0 0 0 0 7 
02 53 0 0 0 0 11 
02 54 0 0 0 0 0 
02 55 0 0 0 0 2 
02 56 0 0 0 0 0 
02 57 0 0 0 0 0 
02 58 0 0 0 0 15 
02 59 0 0 0 0 15 
02 60 0 0 0 0 14 
02 61 0 0 0 0 15 
02 62 0 0 0 0 0 
02 63 0 0 0 0 12 
03 00 0 0 0 0 11 
03 01 0 0 0 0 15 
03 02 0 0 0 0 3 
03 03 0 0 0 0 0 
03 04 0 0 0 0 14 
03 05 0 0 0 0 15 
03 06 0 0 0 0 5 
03 07 0 0 0 0 7 
03 08 0 0 0 0 0 
03 09 0 0 0 0 10 
03 10 0 0 0 0 0 
03 11 0 0 0 0 0 
03 12 0 0 0 0 15 
03 13 0 0 0 0 5 
03 14 0 0 0 0 15 
03 15 0 0 0 0 0 
03 16 0 0 0 0 0 
03 17 0 0 0 0 15 
03 18 0 0 0 0 15 
03 19 0 0 0 0 0 
03 20 0 0 0 0 2 
03 21 0 0 0 0 0 
03 22 0 0 0 0 3 
03 23 0 0 0 0 6 
03 24 0 0 0 0 8 
03 25 0 0 0 0 0 
03 26 0 0 0 0 15 
03 27 0 0 0 0 4 
03 28 0 0 0 0 10 
03 29 0 0 0 0 15 
03 30 0 0 0 0 0 
03 31 0 0 0 0 15 
03 32 0 0 0 0 0 
03 33 0 0 0 0 0 
03 34 0 0 0 0 6 
03 35 0 0 0 0 7 
03 36 0 0 0 0 8 
03 37 0 0 0 0 7 
03 38 0 0 0 0 15 
03 39 0 0 0 0 15 
03 40 0 0 0 0 0 
03 41 0 0 0 0 0 
03 42 0 0 0 0 15 
03 43 0 0 0 0 15 
03 44 0 0 0 0 1 
03 45 0 0 0 0 15 
03 46 0 0 0 0 3 
03 47 0 0 0 0 1 
03 48 0 0 0 0 3 
03 49 0 0 0 0 12 
03 50 0 0 0 0 0 
03 51 0 0 0 0 1 
03 52 0 0 0 0 4 
03 53 0 0 0 0 14 
03 54 0 0 0 0 3 
03 55 0 0 0 0 15 
03 56 0 0 0 0 10 
03 57 0 0 0 0 0 
03 58 0 0 0 0 15 
03 59 0 0 0 0 8 
03 60 0 0 0 0 0 
03 61 0 0 0 0 0 
03 62 0 0 0 0 0 
03 63 0 0 0 0 3 
04 00 0 0 0 0 0 
04 01 0 0 0 0 15 
04 02 0 0 0 0 15 
04 03 0 0 0 0 2 
04 04 0 0 0 0 10 
04 05 0 0 0 0 15 
04 06 0 0 0 0 15 
04 07 0 0 0 0 15 
04 08 0 0 0 0 3 
04 09 0 0 0 0 0 
04 10 0 0 0 0 0 
04 11 0 0 0 0 14 
04 12 0 0 0 0 11 
04 13 0 0 0 0 9 
04 14 0 0 0 0 0 
04 15 0 0 0 0 15 
04 16 0 0 0 0 0 
04 17 0 0 0 0 7 
04 18 0 0 0 0 12 
04 19 0 0 0 0 15 
04 20 0 0 0 0 15 
04 21 0 0 0 0 8 
04 22 0 0 0 0 5 
04 23 0 0 0 0 15 
04 24 0 0 0 0 5 
04 25 0 0 0 0 0 
04 26 0 0 0 0 14 
04 27 0 0 0 0 13 
04 28 0 0 0 0 13 
04 29 0 0 0 0 12 
04 30 0 0 0 0 0 
04 31 0 0 0 0 2 
04 32 0 0 0 0 7 
04 33 0 0 0 0 3 
04 34 0 0 0 0 8 
04 35 0 0 0 0 0 
04 36 0 0 0 0 0 
04 37 0 0 0 0 15
... 3802 more lines ...
Attachment 3: matrix_mpw4_piggy.txt 
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} 

# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1 
00 00 0 1 0 0 0 
00 01 0 0 0 0 0 
00 02 0 0 0 0 15 
00 03 0 0 0 0 11 
00 04 0 0 0 0 11 
00 05 0 0 0 0 6 
00 06 0 0 0 0 0 
00 07 0 0 0 0 0 
00 08 0 0 0 0 7 
00 09 0 0 0 0 3 
00 10 0 0 0 0 15 
00 11 0 0 0 0 6 
00 12 0 0 0 0 6 
00 13 0 0 0 0 5 
00 14 0 0 0 0 15 
00 15 0 0 0 0 15 
00 16 0 0 0 0 1 
00 17 0 0 0 0 15 
00 18 0 0 0 0 15 
00 19 0 0 0 0 7 
00 20 0 0 0 0 6 
00 21 0 0 0 0 0 
00 22 0 0 0 0 15 
00 23 0 0 0 0 10 
00 24 0 0 0 0 14 
00 25 0 0 0 0 0 
00 26 0 0 0 0 15 
00 27 0 0 0 0 0 
00 28 0 0 0 0 3 
00 29 0 0 0 0 0 
00 30 0 0 0 0 11 
00 31 0 0 0 0 0 
00 32 0 0 0 0 6 
00 33 0 0 0 0 6 
00 34 0 0 0 0 11 
00 35 0 0 0 0 7 
00 36 0 0 0 0 15 
00 37 0 0 0 0 15 
00 38 0 0 0 0 8 
00 39 0 0 0 0 0 
00 40 0 0 0 0 1 
00 41 0 0 0 0 7 
00 42 0 0 0 0 8 
00 43 0 0 0 0 0 
00 44 0 0 0 0 7 
00 45 0 0 0 0 9 
00 46 0 0 0 0 15 
00 47 0 0 0 0 10 
00 48 0 0 0 0 15 
00 49 0 0 0 0 6 
00 50 0 0 0 0 14 
00 51 0 0 0 0 15 
00 52 0 0 0 0 15 
00 53 0 0 0 0 6 
00 54 0 0 0 0 15 
00 55 0 0 0 0 7 
00 56 0 0 0 0 15 
00 57 0 0 0 0 15 
00 58 0 0 0 0 15 
00 59 0 0 0 0 15 
00 60 0 0 0 0 15 
00 61 0 0 0 0 15 
00 62 0 0 0 0 15 
00 63 0 0 0 0 9 
01 00 0 0 0 0 0 
01 01 0 0 0 0 0 
01 02 0 0 0 0 8 
01 03 0 0 0 0 4 
01 04 0 0 0 0 9 
01 05 0 0 0 0 0 
01 06 0 0 0 0 9 
01 07 0 0 0 0 0 
01 08 0 0 0 0 15 
01 09 0 0 0 0 0 
01 10 0 0 0 0 15 
01 11 0 0 0 0 1 
01 12 0 0 0 0 13 
01 13 0 0 0 0 0 
01 14 0 0 0 0 0 
01 15 0 0 0 0 7 
01 16 0 0 0 0 15 
01 17 0 0 0 0 0 
01 18 0 0 0 0 6 
01 19 0 0 0 0 4 
01 20 0 0 0 0 6 
01 21 0 0 0 0 0 
01 22 0 0 0 0 0 
01 23 0 0 0 0 14 
01 24 0 0 0 0 1 
01 25 0 0 0 0 6 
01 26 0 0 0 0 7 
01 27 0 0 0 0 0 
01 28 0 0 0 0 13 
01 29 0 0 0 0 0 
01 30 0 0 0 0 15 
01 31 0 0 0 0 7 
01 32 0 0 0 0 15 
01 33 0 0 0 0 13 
01 34 0 0 0 0 15 
01 35 0 0 0 0 0 
01 36 0 0 0 0 0 
01 37 0 0 0 0 0 
01 38 0 0 0 0 15 
01 39 0 0 0 0 0 
01 40 0 0 0 0 1 
01 41 0 0 0 0 0 
01 42 0 0 0 0 0 
01 43 0 0 0 0 15 
01 44 0 0 0 0 12 
01 45 0 0 0 0 7 
01 46 0 0 0 0 15 
01 47 0 0 0 0 8 
01 48 0 0 0 0 11 
01 49 0 0 0 0 0 
01 50 0 0 0 0 15 
01 51 0 0 0 0 3 
01 52 0 0 0 0 15 
01 53 0 0 0 0 2 
01 54 0 0 0 0 15 
01 55 0 0 0 0 7 
01 56 0 0 0 0 15 
01 57 0 0 0 0 15 
01 58 0 0 0 0 15 
01 59 0 0 0 0 0 
01 60 0 0 0 0 15 
01 61 0 0 0 0 14 
01 62 0 0 0 0 6 
01 63 0 0 0 0 7 
02 00 0 0 0 0 15 
02 01 0 0 0 0 3 
02 02 0 0 0 0 5 
02 03 0 0 0 0 0 
02 04 0 0 0 0 6 
02 05 0 0 0 0 0 
02 06 0 0 0 0 7 
02 07 0 0 0 0 4 
02 08 0 0 0 0 8 
02 09 0 0 0 0 6 
02 10 0 0 0 0 15 
02 11 0 0 0 0 0 
02 12 0 0 0 0 12 
02 13 0 0 0 0 5 
02 14 0 0 0 0 4 
02 15 0 0 0 0 0 
02 16 0 0 0 0 15 
02 17 0 0 0 0 0 
02 18 0 0 0 0 15 
02 19 0 0 0 0 0 
02 20 0 0 0 0 7 
02 21 0 0 0 0 15 
02 22 0 0 0 0 5 
02 23 0 0 0 0 0 
02 24 0 0 0 0 6 
02 25 0 0 0 0 0 
02 26 0 0 0 0 15 
02 27 0 0 0 0 9 
02 28 0 0 0 0 10 
02 29 0 0 0 0 0 
02 30 0 0 0 0 10 
02 31 0 0 0 0 11 
02 32 0 0 0 0 13 
02 33 0 0 0 0 13 
02 34 0 0 0 0 15 
02 35 0 0 0 0 0 
02 36 0 0 0 0 15 
02 37 0 0 0 0 4 
02 38 0 0 0 0 0 
02 39 0 0 0 0 0 
02 40 0 0 0 0 6 
02 41 0 0 0 0 7 
02 42 0 0 0 0 15 
02 43 0 0 0 0 6 
02 44 0 0 0 0 10 
02 45 0 0 0 0 4 
02 46 0 0 0 0 15 
02 47 0 0 0 0 15 
02 48 0 0 0 0 15 
02 49 0 0 0 0 9 
02 50 0 0 0 0 3 
02 51 0 0 0 0 7 
02 52 0 0 0 0 15 
02 53 0 0 0 0 9 
02 54 0 0 0 0 15 
02 55 0 0 0 0 3 
02 56 0 0 0 0 14 
02 57 0 0 0 0 15 
02 58 0 0 0 0 15 
02 59 0 0 0 0 14 
02 60 0 0 0 0 15 
02 61 0 0 0 0 9 
02 62 0 0 0 0 15 
02 63 0 0 0 0 15 
03 00 0 0 0 0 15 
03 01 0 0 0 0 14 
03 02 0 0 0 0 15 
03 03 0 0 0 0 10 
03 04 0 0 0 0 15 
03 05 0 0 0 0 0 
03 06 0 0 0 0 0 
03 07 0 0 0 0 0 
03 08 0 0 0 0 15 
03 09 0 0 0 0 8 
03 10 0 0 0 0 14 
03 11 0 0 0 0 0 
03 12 0 0 0 0 12 
03 13 0 0 0 0 0 
03 14 0 0 0 0 11 
03 15 0 0 0 0 6 
03 16 0 0 0 0 15 
03 17 0 0 0 0 0 
03 18 0 0 0 0 15 
03 19 0 0 0 0 0 
03 20 0 0 0 0 15 
03 21 0 0 0 0 8 
03 22 0 0 0 0 8 
03 23 0 0 0 0 14 
03 24 0 0 0 0 15 
03 25 0 0 0 0 0 
03 26 0 0 0 0 14 
03 27 0 0 0 0 15 
03 28 0 0 0 0 5 
03 29 0 0 0 0 0 
03 30 0 0 0 0 4 
03 31 0 0 0 0 0 
03 32 0 0 0 0 7 
03 33 0 0 0 0 7 
03 34 0 0 0 0 15 
03 35 0 0 0 0 0 
03 36 0 0 0 0 8 
03 37 0 0 0 0 0 
03 38 0 0 0 0 15 
03 39 0 0 0 0 7 
03 40 0 0 0 0 6 
03 41 0 0 0 0 4 
03 42 0 0 0 0 13 
03 43 0 0 0 0 6 
03 44 0 0 0 0 15 
03 45 0 0 0 0 8 
03 46 0 0 0 0 5 
03 47 0 0 0 0 0 
03 48 0 0 0 0 0 
03 49 0 0 0 0 9 
03 50 0 0 0 0 12 
03 51 0 0 0 0 13 
03 52 0 0 0 0 7 
03 53 0 0 0 0 0 
03 54 0 0 0 0 15 
03 55 0 0 0 0 0 
03 56 0 0 0 0 6 
03 57 0 0 0 0 11 
03 58 0 0 0 0 12 
03 59 0 0 0 0 7 
03 60 0 0 0 0 11 
03 61 0 0 0 0 15 
03 62 0 0 0 0 9 
03 63 0 0 0 0 0 
04 00 0 0 0 0 10 
04 01 0 0 0 0 12 
04 02 0 0 0 0 4 
04 03 0 0 0 0 0 
04 04 0 0 0 0 0 
04 05 0 0 0 0 0 
04 06 0 0 0 0 7 
04 07 0 0 0 0 6 
04 08 0 0 0 0 15 
04 09 0 0 0 0 4 
04 10 0 0 0 0 4 
04 11 0 0 0 0 2 
04 12 0 0 0 0 15 
04 13 0 0 0 0 0 
04 14 0 0 0 0 5 
04 15 0 0 0 0 8 
04 16 0 0 0 0 8 
04 17 0 0 0 0 6 
04 18 0 0 0 0 6 
04 19 0 0 0 0 3 
04 20 0 0 0 0 13 
04 21 0 0 0 0 15 
04 22 0 0 0 0 15 
04 23 0 0 0 0 7 
04 24 0 0 0 0 15 
04 25 0 0 0 0 8 
04 26 0 0 0 0 8 
04 27 0 0 0 0 8 
04 28 0 0 0 0 11 
04 29 0 0 0 0 8 
04 30 0 0 0 0 3 
04 31 0 0 0 0 2 
04 32 0 0 0 0 15 
04 33 0 0 0 0 10 
04 34 0 0 0 0 15 
04 35 0 0 0 0 7 
04 36 0 0 0 0 15 
04 37 0 0 0 0 0
... 3802 more lines ...
Attachment 4: mpw4.conf 
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". 
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"


[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001  #8 coinc1+2
in0_STR = 0	# 0 
in0_DEL = 0	# 18
in1_STR = 0	# 0
in1_DEL = 0	# 18
in2_STR = 0	# 0
in2_DEL = 0 	# 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.025 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0x6

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x30 #0x00

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1


# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc

## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1




[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing


[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /media/silicon/testbeam_data/mpw4_maus_240825/tlu/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1


[Producer.RD50_MPW4_0]
#register_key = "vnfb"
#register_value = 0x12

[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/mpw4_maus_240825/mpw4/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1

[Monitor.mpw4_mon]
ENABLE_PRINT = 0
ENABLE_STD_PRINT = 0
ENABLE_STD_CONVERTER = 1
FORWARD2GUI = 1

[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4_base.txt, matrix_mpw4_piggy.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
  133   Sun Aug 25 11:35:21 2024 tb-crewonly base67RD50-MPW4252.7 MeVLow Flux Very LowProtonUnknown25.08.2024 11:35:3325.08.2024 11:35:480Normal  
automatic log for run 67
Comment:
E-scan
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = cBase
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_base.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 4
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0.7
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.96
th__i = 3


[RD50_MPW4_Piggy]
this_config_file = config.cfg
#SEC::MISC
calib_file = cPiggy
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 0
execute_file = execute.txt
i2c_addr = 0x47
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_piggy.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 4
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt 
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} 

# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1 
00 00 0 0 0 0 15 
00 01 0 0 0 0 0 
00 02 0 0 0 0 15 
00 03 0 0 0 0 13 
00 04 0 0 0 0 11 
00 05 0 0 0 0 15 
00 06 0 0 0 0 15 
00 07 0 0 0 0 8 
00 08 0 0 0 0 0 
00 09 0 0 0 0 15 
00 10 0 0 0 0 8 
00 11 0 0 0 0 7 
00 12 0 0 0 0 15 
00 13 0 0 0 0 0 
00 14 0 0 0 0 8 
00 15 0 0 0 0 4 
00 16 0 0 0 0 3 
00 17 0 0 0 0 15 
00 18 0 0 0 0 15 
00 19 0 0 0 0 15 
00 20 0 0 0 0 0 
00 21 0 0 0 0 0 
00 22 0 0 0 0 15 
00 23 0 0 0 0 9 
00 24 0 0 0 0 15 
00 25 0 0 0 0 6 
00 26 0 0 0 0 0 
00 27 0 0 0 0 0 
00 28 0 0 0 0 14 
00 29 0 0 0 0 0 
00 30 0 0 0 0 7 
00 31 0 0 0 0 0 
00 32 0 0 0 0 12 
00 33 0 0 0 0 5 
00 34 0 0 0 0 15 
00 35 0 0 0 0 12 
00 36 0 0 0 0 15 
00 37 0 0 0 0 11 
00 38 0 0 0 0 0 
00 39 0 0 0 0 9 
00 40 0 0 0 0 15 
00 41 0 0 0 0 0 
00 42 0 0 0 0 15 
00 43 0 0 0 0 4 
00 44 0 0 0 0 1 
00 45 0 0 0 0 15 
00 46 0 0 0 0 1 
00 47 0 0 0 0 0 
00 48 0 0 0 0 0 
00 49 0 0 0 0 0 
00 50 0 0 0 0 0 
00 51 0 0 0 0 0 
00 52 0 0 0 0 15 
00 53 0 0 0 0 8 
00 54 0 0 0 0 11 
00 55 0 0 0 0 11 
00 56 0 0 0 0 15 
00 57 0 0 0 0 0 
00 58 0 0 0 0 4 
00 59 0 0 0 0 0 
00 60 0 0 0 0 12 
00 61 0 0 0 0 0 
00 62 0 0 0 0 15 
00 63 0 0 0 0 15 
01 00 0 0 0 0 15 
01 01 0 0 0 0 10 
01 02 0 0 0 0 15 
01 03 0 0 0 0 3 
01 04 0 0 0 0 7 
01 05 0 0 0 0 0 
01 06 0 0 0 0 5 
01 07 0 0 0 0 12 
01 08 0 0 0 0 11 
01 09 0 0 0 0 15 
01 10 0 0 0 0 8 
01 11 0 0 0 0 7 
01 12 0 0 0 0 14 
01 13 0 0 0 0 15 
01 14 0 0 0 0 14 
01 15 0 0 0 0 0 
01 16 0 0 0 0 0 
01 17 0 0 0 0 15 
01 18 0 0 0 0 1 
01 19 0 0 0 0 15 
01 20 0 0 0 0 6 
01 21 0 0 0 0 15 
01 22 0 0 0 0 0 
01 23 0 0 0 0 15 
01 24 0 0 0 0 0 
01 25 0 0 0 0 0 
01 26 0 0 0 0 6 
01 27 0 0 0 0 4 
01 28 0 0 0 0 0 
01 29 0 0 0 0 0 
01 30 0 0 0 0 0 
01 31 0 0 0 0 0 
01 32 0 0 0 0 10 
01 33 0 0 0 0 6 
01 34 0 0 0 0 15 
01 35 0 0 0 0 11 
01 36 0 0 0 0 4 
01 37 0 0 0 0 9 
01 38 0 0 0 0 15 
01 39 0 0 0 0 10 
01 40 0 0 0 0 12 
01 41 0 0 0 0 5 
01 42 0 0 0 0 15 
01 43 0 0 0 0 0 
01 44 0 0 0 0 5 
01 45 0 0 0 0 15 
01 46 0 0 0 0 10 
01 47 0 0 0 0 0 
01 48 0 0 0 0 0 
01 49 0 0 0 0 8 
01 50 0 0 0 0 15 
01 51 0 0 0 0 6 
01 52 0 0 0 0 4 
01 53 0 0 0 0 0 
01 54 0 0 0 0 15 
01 55 0 0 0 0 0 
01 56 0 0 0 0 10 
01 57 0 0 0 0 15 
01 58 0 0 0 0 0 
01 59 0 0 0 0 5 
01 60 0 0 0 0 8 
01 61 0 0 0 0 14 
01 62 0 0 0 0 11 
01 63 0 0 0 0 15 
02 00 0 0 0 0 3 
02 01 0 0 0 0 15 
02 02 0 0 0 0 15 
02 03 0 0 0 0 13 
02 04 0 0 0 0 15 
02 05 0 0 0 0 11 
02 06 0 0 0 0 15 
02 07 0 0 0 0 15 
02 08 0 0 0 0 15 
02 09 0 0 0 0 12 
02 10 0 0 0 0 11 
02 11 0 0 0 0 0 
02 12 0 0 0 0 7 
02 13 0 0 0 0 9 
02 14 0 0 0 0 11 
02 15 0 0 0 0 2 
02 16 0 0 0 0 15 
02 17 0 0 0 0 13 
02 18 0 0 0 0 12 
02 19 0 0 0 0 15 
02 20 0 0 0 0 15 
02 21 0 0 0 0 7 
02 22 0 0 0 0 2 
02 23 0 0 0 0 15 
02 24 0 0 0 0 10 
02 25 0 0 0 0 9 
02 26 0 0 0 0 7 
02 27 0 0 0 0 5 
02 28 0 0 0 0 15 
02 29 0 0 0 0 15 
02 30 0 0 0 0 14 
02 31 0 0 0 0 15 
02 32 0 0 0 0 13 
02 33 0 0 0 0 7 
02 34 0 0 0 0 0 
02 35 0 0 0 0 7 
02 36 0 0 0 0 1 
02 37 0 0 0 0 15 
02 38 0 0 0 0 3 
02 39 0 0 0 0 11 
02 40 0 0 0 0 7 
02 41 0 0 0 0 13 
02 42 0 0 0 0 4 
02 43 0 0 0 0 15 
02 44 0 0 0 0 0 
02 45 0 0 0 0 15 
02 46 0 0 0 0 15 
02 47 0 0 0 0 0 
02 48 0 0 0 0 8 
02 49 0 0 0 0 15 
02 50 0 0 0 0 0 
02 51 0 0 0 0 12 
02 52 0 0 0 0 7 
02 53 0 0 0 0 11 
02 54 0 0 0 0 0 
02 55 0 0 0 0 2 
02 56 0 0 0 0 0 
02 57 0 0 0 0 0 
02 58 0 0 0 0 15 
02 59 0 0 0 0 15 
02 60 0 0 0 0 14 
02 61 0 0 0 0 15 
02 62 0 0 0 0 0 
02 63 0 0 0 0 12 
03 00 0 0 0 0 11 
03 01 0 0 0 0 15 
03 02 0 0 0 0 3 
03 03 0 0 0 0 0 
03 04 0 0 0 0 14 
03 05 0 0 0 0 15 
03 06 0 0 0 0 5 
03 07 0 0 0 0 7 
03 08 0 0 0 0 0 
03 09 0 0 0 0 10 
03 10 0 0 0 0 0 
03 11 0 0 0 0 0 
03 12 0 0 0 0 15 
03 13 0 0 0 0 5 
03 14 0 0 0 0 15 
03 15 0 0 0 0 0 
03 16 0 0 0 0 0 
03 17 0 0 0 0 15 
03 18 0 0 0 0 15 
03 19 0 0 0 0 0 
03 20 0 0 0 0 2 
03 21 0 0 0 0 0 
03 22 0 0 0 0 3 
03 23 0 0 0 0 6 
03 24 0 0 0 0 8 
03 25 0 0 0 0 0 
03 26 0 0 0 0 15 
03 27 0 0 0 0 4 
03 28 0 0 0 0 10 
03 29 0 0 0 0 15 
03 30 0 0 0 0 0 
03 31 0 0 0 0 15 
03 32 0 0 0 0 0 
03 33 0 0 0 0 0 
03 34 0 0 0 0 6 
03 35 0 0 0 0 7 
03 36 0 0 0 0 8 
03 37 0 0 0 0 7 
03 38 0 0 0 0 15 
03 39 0 0 0 0 15 
03 40 0 0 0 0 0 
03 41 0 0 0 0 0 
03 42 0 0 0 0 15 
03 43 0 0 0 0 15 
03 44 0 0 0 0 1 
03 45 0 0 0 0 15 
03 46 0 0 0 0 3 
03 47 0 0 0 0 1 
03 48 0 0 0 0 3 
03 49 0 0 0 0 12 
03 50 0 0 0 0 0 
03 51 0 0 0 0 1 
03 52 0 0 0 0 4 
03 53 0 0 0 0 14 
03 54 0 0 0 0 3 
03 55 0 0 0 0 15 
03 56 0 0 0 0 10 
03 57 0 0 0 0 0 
03 58 0 0 0 0 15 
03 59 0 0 0 0 8 
03 60 0 0 0 0 0 
03 61 0 0 0 0 0 
03 62 0 0 0 0 0 
03 63 0 0 0 0 3 
04 00 0 0 0 0 0 
04 01 0 0 0 0 15 
04 02 0 0 0 0 15 
04 03 0 0 0 0 2 
04 04 0 0 0 0 10 
04 05 0 0 0 0 15 
04 06 0 0 0 0 15 
04 07 0 0 0 0 15 
04 08 0 0 0 0 3 
04 09 0 0 0 0 0 
04 10 0 0 0 0 0 
04 11 0 0 0 0 14 
04 12 0 0 0 0 11 
04 13 0 0 0 0 9 
04 14 0 0 0 0 0 
04 15 0 0 0 0 15 
04 16 0 0 0 0 0 
04 17 0 0 0 0 7 
04 18 0 0 0 0 12 
04 19 0 0 0 0 15 
04 20 0 0 0 0 15 
04 21 0 0 0 0 8 
04 22 0 0 0 0 5 
04 23 0 0 0 0 15 
04 24 0 0 0 0 5 
04 25 0 0 0 0 0 
04 26 0 0 0 0 14 
04 27 0 0 0 0 13 
04 28 0 0 0 0 13 
04 29 0 0 0 0 12 
04 30 0 0 0 0 0 
04 31 0 0 0 0 2 
04 32 0 0 0 0 7 
04 33 0 0 0 0 3 
04 34 0 0 0 0 8 
04 35 0 0 0 0 0 
04 36 0 0 0 0 0 
04 37 0 0 0 0 15
... 3802 more lines ...
Attachment 3: matrix_mpw4_piggy.txt 
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} 

# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1 
00 00 0 1 0 0 0 
00 01 0 0 0 0 0 
00 02 0 0 0 0 15 
00 03 0 0 0 0 11 
00 04 0 0 0 0 11 
00 05 0 0 0 0 6 
00 06 0 0 0 0 0 
00 07 0 0 0 0 0 
00 08 0 0 0 0 7 
00 09 0 0 0 0 3 
00 10 0 0 0 0 15 
00 11 0 0 0 0 6 
00 12 0 0 0 0 6 
00 13 0 0 0 0 5 
00 14 0 0 0 0 15 
00 15 0 0 0 0 15 
00 16 0 0 0 0 1 
00 17 0 0 0 0 15 
00 18 0 0 0 0 15 
00 19 0 0 0 0 7 
00 20 0 0 0 0 6 
00 21 0 0 0 0 0 
00 22 0 0 0 0 15 
00 23 0 0 0 0 10 
00 24 0 0 0 0 14 
00 25 0 0 0 0 0 
00 26 0 0 0 0 15 
00 27 0 0 0 0 0 
00 28 0 0 0 0 3 
00 29 0 0 0 0 0 
00 30 0 0 0 0 11 
00 31 0 0 0 0 0 
00 32 0 0 0 0 6 
00 33 0 0 0 0 6 
00 34 0 0 0 0 11 
00 35 0 0 0 0 7 
00 36 0 0 0 0 15 
00 37 0 0 0 0 15 
00 38 0 0 0 0 8 
00 39 0 0 0 0 0 
00 40 0 0 0 0 1 
00 41 0 0 0 0 7 
00 42 0 0 0 0 8 
00 43 0 0 0 0 0 
00 44 0 0 0 0 7 
00 45 0 0 0 0 9 
00 46 0 0 0 0 15 
00 47 0 0 0 0 10 
00 48 0 0 0 0 15 
00 49 0 0 0 0 6 
00 50 0 0 0 0 14 
00 51 0 0 0 0 15 
00 52 0 0 0 0 15 
00 53 0 0 0 0 6 
00 54 0 0 0 0 15 
00 55 0 0 0 0 7 
00 56 0 0 0 0 15 
00 57 0 0 0 0 15 
00 58 0 0 0 0 15 
00 59 0 0 0 0 15 
00 60 0 0 0 0 15 
00 61 0 0 0 0 15 
00 62 0 0 0 0 15 
00 63 0 0 0 0 9 
01 00 0 0 0 0 0 
01 01 0 0 0 0 0 
01 02 0 0 0 0 8 
01 03 0 0 0 0 4 
01 04 0 0 0 0 9 
01 05 0 0 0 0 0 
01 06 0 0 0 0 9 
01 07 0 0 0 0 0 
01 08 0 0 0 0 15 
01 09 0 0 0 0 0 
01 10 0 0 0 0 15 
01 11 0 0 0 0 1 
01 12 0 0 0 0 13 
01 13 0 0 0 0 0 
01 14 0 0 0 0 0 
01 15 0 0 0 0 7 
01 16 0 0 0 0 15 
01 17 0 0 0 0 0 
01 18 0 0 0 0 6 
01 19 0 0 0 0 4 
01 20 0 0 0 0 6 
01 21 0 0 0 0 0 
01 22 0 0 0 0 0 
01 23 0 0 0 0 14 
01 24 0 0 0 0 1 
01 25 0 0 0 0 6 
01 26 0 0 0 0 7 
01 27 0 0 0 0 0 
01 28 0 0 0 0 13 
01 29 0 0 0 0 0 
01 30 0 0 0 0 15 
01 31 0 0 0 0 7 
01 32 0 0 0 0 15 
01 33 0 0 0 0 13 
01 34 0 0 0 0 15 
01 35 0 0 0 0 0 
01 36 0 0 0 0 0 
01 37 0 0 0 0 0 
01 38 0 0 0 0 15 
01 39 0 0 0 0 0 
01 40 0 0 0 0 1 
01 41 0 0 0 0 0 
01 42 0 0 0 0 0 
01 43 0 0 0 0 15 
01 44 0 0 0 0 12 
01 45 0 0 0 0 7 
01 46 0 0 0 0 15 
01 47 0 0 0 0 8 
01 48 0 0 0 0 11 
01 49 0 0 0 0 0 
01 50 0 0 0 0 15 
01 51 0 0 0 0 3 
01 52 0 0 0 0 15 
01 53 0 0 0 0 2 
01 54 0 0 0 0 15 
01 55 0 0 0 0 7 
01 56 0 0 0 0 15 
01 57 0 0 0 0 15 
01 58 0 0 0 0 15 
01 59 0 0 0 0 0 
01 60 0 0 0 0 15 
01 61 0 0 0 0 14 
01 62 0 0 0 0 6 
01 63 0 0 0 0 7 
02 00 0 0 0 0 15 
02 01 0 0 0 0 3 
02 02 0 0 0 0 5 
02 03 0 0 0 0 0 
02 04 0 0 0 0 6 
02 05 0 0 0 0 0 
02 06 0 0 0 0 7 
02 07 0 0 0 0 4 
02 08 0 0 0 0 8 
02 09 0 0 0 0 6 
02 10 0 0 0 0 15 
02 11 0 0 0 0 0 
02 12 0 0 0 0 12 
02 13 0 0 0 0 5 
02 14 0 0 0 0 4 
02 15 0 0 0 0 0 
02 16 0 0 0 0 15 
02 17 0 0 0 0 0 
02 18 0 0 0 0 15 
02 19 0 0 0 0 0 
02 20 0 0 0 0 7 
02 21 0 0 0 0 15 
02 22 0 0 0 0 5 
02 23 0 0 0 0 0 
02 24 0 0 0 0 6 
02 25 0 0 0 0 0 
02 26 0 0 0 0 15 
02 27 0 0 0 0 9 
02 28 0 0 0 0 10 
02 29 0 0 0 0 0 
02 30 0 0 0 0 10 
02 31 0 0 0 0 11 
02 32 0 0 0 0 13 
02 33 0 0 0 0 13 
02 34 0 0 0 0 15 
02 35 0 0 0 0 0 
02 36 0 0 0 0 15 
02 37 0 0 0 0 4 
02 38 0 0 0 0 0 
02 39 0 0 0 0 0 
02 40 0 0 0 0 6 
02 41 0 0 0 0 7 
02 42 0 0 0 0 15 
02 43 0 0 0 0 6 
02 44 0 0 0 0 10 
02 45 0 0 0 0 4 
02 46 0 0 0 0 15 
02 47 0 0 0 0 15 
02 48 0 0 0 0 15 
02 49 0 0 0 0 9 
02 50 0 0 0 0 3 
02 51 0 0 0 0 7 
02 52 0 0 0 0 15 
02 53 0 0 0 0 9 
02 54 0 0 0 0 15 
02 55 0 0 0 0 3 
02 56 0 0 0 0 14 
02 57 0 0 0 0 15 
02 58 0 0 0 0 15 
02 59 0 0 0 0 14 
02 60 0 0 0 0 15 
02 61 0 0 0 0 9 
02 62 0 0 0 0 15 
02 63 0 0 0 0 15 
03 00 0 0 0 0 15 
03 01 0 0 0 0 14 
03 02 0 0 0 0 15 
03 03 0 0 0 0 10 
03 04 0 0 0 0 15 
03 05 0 0 0 0 0 
03 06 0 0 0 0 0 
03 07 0 0 0 0 0 
03 08 0 0 0 0 15 
03 09 0 0 0 0 8 
03 10 0 0 0 0 14 
03 11 0 0 0 0 0 
03 12 0 0 0 0 12 
03 13 0 0 0 0 0 
03 14 0 0 0 0 11 
03 15 0 0 0 0 6 
03 16 0 0 0 0 15 
03 17 0 0 0 0 0 
03 18 0 0 0 0 15 
03 19 0 0 0 0 0 
03 20 0 0 0 0 15 
03 21 0 0 0 0 8 
03 22 0 0 0 0 8 
03 23 0 0 0 0 14 
03 24 0 0 0 0 15 
03 25 0 0 0 0 0 
03 26 0 0 0 0 14 
03 27 0 0 0 0 15 
03 28 0 0 0 0 5 
03 29 0 0 0 0 0 
03 30 0 0 0 0 4 
03 31 0 0 0 0 0 
03 32 0 0 0 0 7 
03 33 0 0 0 0 7 
03 34 0 0 0 0 15 
03 35 0 0 0 0 0 
03 36 0 0 0 0 8 
03 37 0 0 0 0 0 
03 38 0 0 0 0 15 
03 39 0 0 0 0 7 
03 40 0 0 0 0 6 
03 41 0 0 0 0 4 
03 42 0 0 0 0 13 
03 43 0 0 0 0 6 
03 44 0 0 0 0 15 
03 45 0 0 0 0 8 
03 46 0 0 0 0 5 
03 47 0 0 0 0 0 
03 48 0 0 0 0 0 
03 49 0 0 0 0 9 
03 50 0 0 0 0 12 
03 51 0 0 0 0 13 
03 52 0 0 0 0 7 
03 53 0 0 0 0 0 
03 54 0 0 0 0 15 
03 55 0 0 0 0 0 
03 56 0 0 0 0 6 
03 57 0 0 0 0 11 
03 58 0 0 0 0 12 
03 59 0 0 0 0 7 
03 60 0 0 0 0 11 
03 61 0 0 0 0 15 
03 62 0 0 0 0 9 
03 63 0 0 0 0 0 
04 00 0 0 0 0 10 
04 01 0 0 0 0 12 
04 02 0 0 0 0 4 
04 03 0 0 0 0 0 
04 04 0 0 0 0 0 
04 05 0 0 0 0 0 
04 06 0 0 0 0 7 
04 07 0 0 0 0 6 
04 08 0 0 0 0 15 
04 09 0 0 0 0 4 
04 10 0 0 0 0 4 
04 11 0 0 0 0 2 
04 12 0 0 0 0 15 
04 13 0 0 0 0 0 
04 14 0 0 0 0 5 
04 15 0 0 0 0 8 
04 16 0 0 0 0 8 
04 17 0 0 0 0 6 
04 18 0 0 0 0 6 
04 19 0 0 0 0 3 
04 20 0 0 0 0 13 
04 21 0 0 0 0 15 
04 22 0 0 0 0 15 
04 23 0 0 0 0 7 
04 24 0 0 0 0 15 
04 25 0 0 0 0 8 
04 26 0 0 0 0 8 
04 27 0 0 0 0 8 
04 28 0 0 0 0 11 
04 29 0 0 0 0 8 
04 30 0 0 0 0 3 
04 31 0 0 0 0 2 
04 32 0 0 0 0 15 
04 33 0 0 0 0 10 
04 34 0 0 0 0 15 
04 35 0 0 0 0 7 
04 36 0 0 0 0 15 
04 37 0 0 0 0 0
... 3802 more lines ...
Attachment 4: mpw4.conf 
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". 
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"


[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001  #8 coinc1+2
in0_STR = 0	# 0 
in0_DEL = 0	# 18
in1_STR = 0	# 0
in1_DEL = 0	# 18
in2_STR = 0	# 0
in2_DEL = 0 	# 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.025 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0x6

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x30 #0x00

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1


# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc

## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1




[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing


[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /media/silicon/testbeam_data/mpw4_maus_240825/tlu/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1


[Producer.RD50_MPW4_0]
#register_key = "vnfb"
#register_value = 0x12

[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/mpw4_maus_240825/mpw4/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1

[Monitor.mpw4_mon]
ENABLE_PRINT = 0
ENABLE_STD_PRINT = 0
ENABLE_STD_CONVERTER = 1
FORWARD2GUI = 1

[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4_base.txt, matrix_mpw4_piggy.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
  1   Sat Mar 30 06:34:39 2024 Bernhard PilslAnd a new testbeam starts :D            
  2   Sat Mar 30 06:53:31 2024 bp, ci, hhRD50-MPW4 RD50-MPW4800 MeVLow Flux Very LowProtonUnknown   Normal  
about to start

geo and eudaq ini attached
Attachment 1: mpw4.ini 
# example init file: Ex0.ini
[LogCollector.log]
EULOG_GUI_LOG_FILE_PATTERN = $12D.log

[Producer.tracker_irgendwas]

[Producer.aida_tlu]
initid= 20210115
verbose = 1
ConnectionFile= "file:///home/pct/frameworks/trackereudaq/user/tlu/misc/aida_tlu/aida_tlu_connection.xml"
#ConnectionFile= "file:///home/tlu-ma/latesteudaq/eudaq/user/tlu/misc/aida_tlu/aida_tlu_connection.xml" #for TLU MAUS
DeviceName = "aida_tlu.controlhub"
#DeviceName = "aida_tlu.udp"
TLUmod = "1e"
# number of HDMI inputs, leave 4 even if you only use fewer inputs
nDUTs = 4
nTrgIn = 6
# 0= False (Internal Reference OFF), 1= True
intRefOn = 0
VRefInt = 2.5
VRefExt = 1.3
# I2C address of the bus expander on Enclustra FPGA
I2C_COREEXP_Addr = 0x21
# I2C address of the Si5345
I2C_CLK_Addr = 0x68
# I2C address of 1st AD5665R
I2C_DAC1_Addr = 0x13
# I2C address of 2nd AD5665R
I2C_DAC2_Addr = 0x1F
# address of unique Id number EEPROM
I2C_ID_Addr = 0x50
#I2C address of 1st expander PCA9539PW~/
I2C_EXP1_Addr = 0x74
#I2C address of 2st expander PCA9539PW
I2C_EXP2_Addr = 0x75
#I2C address of AD5665R on powermodule
I2C_DACModule_Addr = 0x1CnoiseTrim
# Max value for control voltage on PMTs (usually 1 V)
PMT_vCtrlMax= 1.0
#I2C address of 1st expander PCA9539PW on powermodule
I2C_EXP1Module_Addr = 0x76
#I2C address of 2nd expander PCA9539PW on powermodule
I2C_EXP2Module_Addr = 0x77


##CONFCLOCK 0= skip clock configuration, 1= configure si5345
CONFCLOCK= 1
#CLOCK_CFG_FILE = "/home/pct-eudaq/latesteudaq/trackereudaq/user/caribou/MPW3/csv/20mhz_out2.txt"
#CLOCK_CFG_FILE = "/home/tlu-ma/mpw3/configs/20mhz_out2.txt"
CLOCK_CFG_FILE = "/home/pct/frameworks/trackereudaq/user/tlu/misc/aida_tlu/aida_tlu_clk_config.txt"
#CLOCK_CFG_FILE = "~/latesteudaq/trackereudaq/user/eudet/misc/hw_conf/aida_tlu/aida_tlu_clk_config.txt" # for TLU MAUS

[Producer.RD50_MPW4_0]
# general
log_level=INFO
# configuration
config_file="config.cfg"

[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
EULOG_GUI_LOG_FILE_PATTERN = maus_$12D.log
# the $12D will be converted a data/time string with 12 digits.

[Producer.elog1]
elog_installation = "/home/pct/frameworks/elog/elog"
elog_host = "elog.hephy.at"
elog_port = 443
elog_logbook = "testbeam-MA2024"
att_stop_time = "t-Stop"
att_start_time = "t-Start"
att_run_number = "Run Number"
att_run_duration = "Duration_min"
color = ""

#simply paste configuration of your Elog logbook
Comment = Testbeams at MedAustron in 2024
Admin user = bergi, maks, bpilsl
Self register = 3

Attributes = Author, Subject, Run Number, DUT, Beam Energy, Rate Setting, Particle Type, Data, t-Start, t-Stop, Duration_min, Frontend
Options DUT = common, DSSD-Tracker, RD50-MPW4, TJ-Monopix2
Extendable options = DUT, Beam Energy, Rate Setting
Options Data = Unknown, Good, Crap
Options Beam Energy = 800 MeV, 252.7 MeV, 194.3 MeV, 175.3 MeV, 145.4 MeV, 100.4 MeV, 83 MeV, 62.4 MeV
Options Particle Type = Proton, Carbon
Options Rate Setting = Low Flux Very Low, Low Flux Low, Low Flux Medium, Low Flux High
Options Frontend = Normal, Normal Casc, HV, HV Casc
Quick filter = Date, Subject, Run Number, DUT, Beam Energy

Menu commands =  List, New, Edit, Delete, Reply, Duplicate, Move to, Find, Help
List Menu commands = New, Find, Select, Logout, Config, Help  
Guest List Menu commands = Find, Login, Help  
Guest menu commands = List, Find, Login, Help

##################################################################
Attachment 2: detectors.geo 
[TLU_0]
role = auxiliary
type = tlu
number_of_pixels = 0, 0
pixel_pitch = 0um, 0um
position = 0mm, 0mm, 0mm
orientation = 0deg, 0deg, 0deg
time_resolution = 0ns

[dssd_5_1_1]
type = dssd
number_of_pixels = 512, 512
pixel_pitch = 100um, 50um
position = 0mm, 0mm, 0mm
orientation = 0deg, 0deg, 0deg
spatial_resolution = 29um,14.5um
material_budget = 0.0032021081576535286
time_resolution = 10000s

[dssd_5_1_2]
type = dssd
number_of_pixels = 512, 512
pixel_pitch = 100um, 50um
position = 0mm, 0mm, 50mm
orientation = 0deg, 0deg, 0deg
spatial_resolution = 29um,14.5um
material_budget = 0.0032021081576535286
time_resolution = 10000s
#role = reference

[RD50_MPWx_base_0]
#mask_file = mask_maus.txt
role = dut
type = RD50_MPWx
number_of_pixels = 64, 64
pixel_pitch = 62um, 62um
position = 0mm, 0mm, 68mm
orientation = 90deg,0deg,180deg
orientation_mode = "zyx"
time_resolution = 25ns
material_budget = 0.00320305

[dssd_5_1_3]
type = dssd
number_of_pixels = 512, 512
pixel_pitch = 100um, 50um
position = 0mm, 0mm, 181mm
orientation = 0deg, 0deg, 0deg
spatial_resolution = 29um,14.5um
material_budget = 0.0032021081576535286
time_resolution = 10000s
role = reference

[dssd_5_1_4]
type = dssd
number_of_pixels = 512, 512
pixel_pitch = 100um, 50um
position = 0mm, 0mm, 231mm
orientation = 0deg, 0deg, 0deg
spatial_resolution = 29um,14.5um
material_budget = 0.0032021081576535286
time_resolution = 10000s
  10   Sat Mar 30 07:59:55 2024 bp, ci, hhRD50-MPW4 RD50-MPW4800 MeVLow Flux Very LowProtonCrap   Normal  
currently no beam
  11   Sat Mar 30 08:05:59 2024 Christian IrmlerRD50-MPW4999           

Tracker calibration run: mpw4-tj-monopix2_00-000999.xml
Generated global xml file for MPW4 shift: mpw4-tj-monopix2_TLU_00-000999.xml 

Previous local runs and xml files (mpw4-tj-monopix2_00-000212.xml) are unusable, because sensor L5.1.1.0 had a loose cotact and thus low gain.
Fixed by disconnecting and reconnecting.

  13   Sat Mar 30 08:34:12 2024 bp, ci, hhRD50-MPW4 RD50-MPW4800 MeVLow Flux Very LowProtonGood   Normal  
beam should be back, there was something in the nozzle too
  14   Sat Mar 30 08:38:21 2024 bp, ci, hhRD50-MPW4 RD50-MPW4800 MeVLow Flux Very LowProtonGood   Normal  
beam not back, fake news
  16   Sat Mar 30 08:56:25 2024 bp, ci, hhRD50-MPW4 RD50-MPW4800 MeVLow Flux Very LowProtonCrap   Normal  
waiting for beam
Performing MTS restart
  18   Sat Mar 30 09:15:13 2024 bp, ci, hhRD50-MPW4 RD50-MPW4800 MeVLow Flux Very LowProtonCrap   Normal  
moved entire setup a bit in order too better focus beam on MPW4 (hopefully)
  19   Sat Mar 30 09:25:05 2024 bp, ci, hhRD50-MPW4 RD50-MPW4800 MeVLow Flux Very LowProtonCrap   Normal  
bea is back Big grin
  23   Sat Mar 30 09:43:29 2024 bp, ci, hhRD50-MPW4 RD50-MPW4800 MeVLow Flux LowProtonGood   Normal  
max triggerof tracker set to 100
  25   Sat Mar 30 09:54:37 2024 bp, ci, hhRD50-MPW4 RD50-MPW4800 MeVLow Flux LowProtonGood   Normal  
correlations still there after rate change
  27   Sat Mar 30 09:59:40 2024 bp, ci, hhRD50-MPW4 RD50-MPW4800 MeVLow Flux MediumProtonGood   Normal  
changed rate
  30   Sat Mar 30 10:23:04 2024 bp, ci, hhRD50-MPW4 RD50-MPW4800 MeVLow Flux LowProtonGood   Normal  
changed rate to low again, too much "noise"
also moved table down and a bit to the left
  34   Sat Mar 30 10:28:42 2024 bp, ci, hhRD50-MPW4 RD50-MPW4800 MeVLow Flux LowProtonGood   Normal  
tracker FADC down, HV not on earlier, restart happening
  38   Sat Mar 30 11:20:13 2024 bp, ci, hhRD50-MPW4 RD50-MPW4800 MeVLow Flux LowProtonGood   Normal  
alignment good now
  43   Sat Mar 30 13:35:09 2024 bp, ci, hhuseful datataking RD50-MPW4800 MeVLow Flux LowProtonGood   Normal  
new users arrived
  72   Sat Jun 8 19:53:47 2024 Felix Ulrich-PurTOF CAL HADES LGADs Test High Rate1TOF-Cal GSI252.7 MeVLow Flux HighProtonGood16:0016:18    

7.5 Mhz on Ramon (after 5 Layers of Silicon and close to second iso centre) and 2.5 MHz on LGAD

  73   Sat Jun 8 19:56:37 2024 Felix Ulrich-PurTOF CAL HADES LGADs Calibrationcurve2TOF-Cal GSI252.7 MeVLow Flux MediumProtonGood16:2916:47    

1 Mhz on Ramon (after 5 Layers of Silicon and close to second iso centre) and 350kHz on LGAD

TOF Calibration Curve

Goto page Previous  1, 2, 3 ... 8, 9, 10, 11   Next  All
ELOG V3.1.5-fc6679b