| ID |
Date |
Author |
Subject |
Run Number |
DUT |
Beam Energy |
Rate Setting |
Particle Type |
Data |
t-Start |
t-Stop |
Duration_min |
Frontend |
Phantom |
Phantom thickness |
|
105
|
Sun Aug 25 06:45:12 2024 |
tb-crew | Piggy test | 46 | RD50-MPW4 | 800 MeV | Low Flux Low | Proton | Unknown | 25.08.2024 06:44:33 | 25.08.2024 06:45:39 | 1 | Normal | | |
automatic log for run 46
Comment:
first tests, trying to get beam right beam |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = cBase
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_base.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 4
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0.7
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 1.15
th__i = 3
[RD50_MPW4_Piggy]
this_config_file = config.cfg
#SEC::MISC
calib_file = cPiggy
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 0
execute_file = execute.txt
i2c_addr = 0x47
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_piggy.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 4
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
|
| Attachment 2: matrix_mpw4_base.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 15
00 01 0 0 0 0 0
00 02 0 0 0 0 15
00 03 0 0 0 0 13
00 04 0 0 0 0 11
00 05 0 0 0 0 15
00 06 0 0 0 0 15
00 07 0 0 0 0 8
00 08 0 0 0 0 0
00 09 0 0 0 0 15
00 10 0 0 0 0 8
00 11 0 0 0 0 7
00 12 0 0 0 0 15
00 13 0 0 0 0 0
00 14 0 0 0 0 8
00 15 0 0 0 0 4
00 16 0 0 0 0 3
00 17 0 0 0 0 15
00 18 0 0 0 0 15
00 19 0 0 0 0 15
00 20 0 0 0 0 0
00 21 0 0 0 0 0
00 22 0 0 0 0 15
00 23 0 0 0 0 9
00 24 0 0 0 0 15
00 25 0 0 0 0 6
00 26 0 0 0 0 0
00 27 0 0 0 0 0
00 28 0 0 0 0 14
00 29 0 0 0 0 0
00 30 0 0 0 0 7
00 31 0 0 0 0 0
00 32 0 0 0 0 12
00 33 0 0 0 0 5
00 34 0 0 0 0 15
00 35 0 0 0 0 12
00 36 0 0 0 0 15
00 37 0 0 0 0 11
00 38 0 0 0 0 0
00 39 0 0 0 0 9
00 40 0 0 0 0 15
00 41 0 0 0 0 0
00 42 0 0 0 0 15
00 43 0 0 0 0 4
00 44 0 0 0 0 1
00 45 0 0 0 0 15
00 46 0 0 0 0 1
00 47 0 0 0 0 0
00 48 0 0 0 0 0
00 49 0 0 0 0 0
00 50 0 0 0 0 0
00 51 0 0 0 0 0
00 52 0 0 0 0 15
00 53 0 0 0 0 8
00 54 0 0 0 0 11
00 55 0 0 0 0 11
00 56 0 0 0 0 15
00 57 0 0 0 0 0
00 58 0 0 0 0 4
00 59 0 0 0 0 0
00 60 0 0 0 0 12
00 61 0 0 0 0 0
00 62 0 0 0 0 15
00 63 0 0 0 0 15
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 15
01 03 0 0 0 0 3
01 04 0 0 0 0 7
01 05 0 0 0 0 0
01 06 0 0 0 0 5
01 07 0 0 0 0 12
01 08 0 0 0 0 11
01 09 0 0 0 0 15
01 10 0 0 0 0 8
01 11 0 0 0 0 7
01 12 0 0 0 0 14
01 13 0 0 0 0 15
01 14 0 0 0 0 14
01 15 0 0 0 0 0
01 16 0 0 0 0 0
01 17 0 0 0 0 15
01 18 0 0 0 0 1
01 19 0 0 0 0 15
01 20 0 0 0 0 6
01 21 0 0 0 0 15
01 22 0 0 0 0 0
01 23 0 0 0 0 15
01 24 0 0 0 0 0
01 25 0 0 0 0 0
01 26 0 0 0 0 6
01 27 0 0 0 0 4
01 28 0 0 0 0 0
01 29 0 0 0 0 0
01 30 0 0 0 0 0
01 31 0 0 0 0 0
01 32 0 0 0 0 10
01 33 0 0 0 0 6
01 34 0 0 0 0 15
01 35 0 0 0 0 11
01 36 0 0 0 0 4
01 37 0 0 0 0 9
01 38 0 0 0 0 15
01 39 0 0 0 0 10
01 40 0 0 0 0 12
01 41 0 0 0 0 5
01 42 0 0 0 0 15
01 43 0 0 0 0 0
01 44 0 0 0 0 5
01 45 0 0 0 0 15
01 46 0 0 0 0 10
01 47 0 0 0 0 0
01 48 0 0 0 0 0
01 49 0 0 0 0 8
01 50 0 0 0 0 15
01 51 0 0 0 0 6
01 52 0 0 0 0 4
01 53 0 0 0 0 0
01 54 0 0 0 0 15
01 55 0 0 0 0 0
01 56 0 0 0 0 10
01 57 0 0 0 0 15
01 58 0 0 0 0 0
01 59 0 0 0 0 5
01 60 0 0 0 0 8
01 61 0 0 0 0 14
01 62 0 0 0 0 11
01 63 0 0 0 0 15
02 00 0 0 0 0 3
02 01 0 0 0 0 15
02 02 0 0 0 0 15
02 03 0 0 0 0 13
02 04 0 0 0 0 15
02 05 0 0 0 0 11
02 06 0 0 0 0 15
02 07 0 0 0 0 15
02 08 0 0 0 0 15
02 09 0 0 0 0 12
02 10 0 0 0 0 11
02 11 0 0 0 0 0
02 12 0 0 0 0 7
02 13 0 0 0 0 9
02 14 0 0 0 0 11
02 15 0 0 0 0 2
02 16 0 0 0 0 15
02 17 0 0 0 0 13
02 18 0 0 0 0 12
02 19 0 0 0 0 15
02 20 0 0 0 0 15
02 21 0 0 0 0 7
02 22 0 0 0 0 2
02 23 0 0 0 0 15
02 24 0 0 0 0 10
02 25 0 0 0 0 9
02 26 0 0 0 0 7
02 27 0 0 0 0 5
02 28 0 0 0 0 15
02 29 0 0 0 0 15
02 30 0 0 0 0 14
02 31 0 0 0 0 15
02 32 0 0 0 0 13
02 33 0 0 0 0 7
02 34 0 0 0 0 0
02 35 0 0 0 0 7
02 36 0 0 0 0 1
02 37 0 0 0 0 15
02 38 0 0 0 0 3
02 39 0 0 0 0 11
02 40 0 0 0 0 7
02 41 0 0 0 0 13
02 42 0 0 0 0 4
02 43 0 0 0 0 15
02 44 0 0 0 0 0
02 45 0 0 0 0 15
02 46 0 0 0 0 15
02 47 0 0 0 0 0
02 48 0 0 0 0 8
02 49 0 0 0 0 15
02 50 0 0 0 0 0
02 51 0 0 0 0 12
02 52 0 0 0 0 7
02 53 0 0 0 0 11
02 54 0 0 0 0 0
02 55 0 0 0 0 2
02 56 0 0 0 0 0
02 57 0 0 0 0 0
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 14
02 61 0 0 0 0 15
02 62 0 0 0 0 0
02 63 0 0 0 0 12
03 00 0 0 0 0 11
03 01 0 0 0 0 15
03 02 0 0 0 0 3
03 03 0 0 0 0 0
03 04 0 0 0 0 14
03 05 0 0 0 0 15
03 06 0 0 0 0 5
03 07 0 0 0 0 7
03 08 0 0 0 0 0
03 09 0 0 0 0 10
03 10 0 0 0 0 0
03 11 0 0 0 0 0
03 12 0 0 0 0 15
03 13 0 0 0 0 5
03 14 0 0 0 0 15
03 15 0 0 0 0 0
03 16 0 0 0 0 0
03 17 0 0 0 0 15
03 18 0 0 0 0 15
03 19 0 0 0 0 0
03 20 0 0 0 0 2
03 21 0 0 0 0 0
03 22 0 0 0 0 3
03 23 0 0 0 0 6
03 24 0 0 0 0 8
03 25 0 0 0 0 0
03 26 0 0 0 0 15
03 27 0 0 0 0 4
03 28 0 0 0 0 10
03 29 0 0 0 0 15
03 30 0 0 0 0 0
03 31 0 0 0 0 15
03 32 0 0 0 0 0
03 33 0 0 0 0 0
03 34 0 0 0 0 6
03 35 0 0 0 0 7
03 36 0 0 0 0 8
03 37 0 0 0 0 7
03 38 0 0 0 0 15
03 39 0 0 0 0 15
03 40 0 0 0 0 0
03 41 0 0 0 0 0
03 42 0 0 0 0 15
03 43 0 0 0 0 15
03 44 0 0 0 0 1
03 45 0 0 0 0 15
03 46 0 0 0 0 3
03 47 0 0 0 0 1
03 48 0 0 0 0 3
03 49 0 0 0 0 12
03 50 0 0 0 0 0
03 51 0 0 0 0 1
03 52 0 0 0 0 4
03 53 0 0 0 0 14
03 54 0 0 0 0 3
03 55 0 0 0 0 15
03 56 0 0 0 0 10
03 57 0 0 0 0 0
03 58 0 0 0 0 15
03 59 0 0 0 0 8
03 60 0 0 0 0 0
03 61 0 0 0 0 0
03 62 0 0 0 0 0
03 63 0 0 0 0 3
04 00 0 0 0 0 0
04 01 0 0 0 0 15
04 02 0 0 0 0 15
04 03 0 0 0 0 2
04 04 0 0 0 0 10
04 05 0 0 0 0 15
04 06 0 0 0 0 15
04 07 0 0 0 0 15
04 08 0 0 0 0 3
04 09 0 0 0 0 0
04 10 0 0 0 0 0
04 11 0 0 0 0 14
04 12 0 0 0 0 11
04 13 0 0 0 0 9
04 14 0 0 0 0 0
04 15 0 0 0 0 15
04 16 0 0 0 0 0
04 17 0 0 0 0 7
04 18 0 0 0 0 12
04 19 0 0 0 0 15
04 20 0 0 0 0 15
04 21 0 0 0 0 8
04 22 0 0 0 0 5
04 23 0 0 0 0 15
04 24 0 0 0 0 5
04 25 0 0 0 0 0
04 26 0 0 0 0 14
04 27 0 0 0 0 13
04 28 0 0 0 0 13
04 29 0 0 0 0 12
04 30 0 0 0 0 0
04 31 0 0 0 0 2
04 32 0 0 0 0 7
04 33 0 0 0 0 3
04 34 0 0 0 0 8
04 35 0 0 0 0 0
04 36 0 0 0 0 0
04 37 0 0 0 0 15
... 3802 more lines ...
|
| Attachment 3: matrix_mpw4_piggy.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 1 0 0 0
00 01 0 0 0 0 0
00 02 0 0 0 0 15
00 03 0 0 0 0 11
00 04 0 0 0 0 11
00 05 0 0 0 0 6
00 06 0 0 0 0 0
00 07 0 0 0 0 0
00 08 0 0 0 0 7
00 09 0 0 0 0 3
00 10 0 0 0 0 15
00 11 0 0 0 0 6
00 12 0 0 0 0 6
00 13 0 0 0 0 5
00 14 0 0 0 0 15
00 15 0 0 0 0 15
00 16 0 0 0 0 1
00 17 0 0 0 0 15
00 18 0 0 0 0 15
00 19 0 0 0 0 7
00 20 0 0 0 0 6
00 21 0 0 0 0 0
00 22 0 0 0 0 15
00 23 0 0 0 0 10
00 24 0 0 0 0 14
00 25 0 0 0 0 0
00 26 0 0 0 0 15
00 27 0 0 0 0 0
00 28 0 0 0 0 3
00 29 0 0 0 0 0
00 30 0 0 0 0 11
00 31 0 0 0 0 0
00 32 0 0 0 0 6
00 33 0 0 0 0 6
00 34 0 0 0 0 11
00 35 0 0 0 0 7
00 36 0 0 0 0 15
00 37 0 0 0 0 15
00 38 0 0 0 0 8
00 39 0 0 0 0 0
00 40 0 0 0 0 1
00 41 0 0 0 0 7
00 42 0 0 0 0 8
00 43 0 0 0 0 0
00 44 0 0 0 0 7
00 45 0 0 0 0 9
00 46 0 0 0 0 15
00 47 0 0 0 0 10
00 48 0 0 0 0 15
00 49 0 0 0 0 6
00 50 0 0 0 0 14
00 51 0 0 0 0 15
00 52 0 0 0 0 15
00 53 0 0 0 0 6
00 54 0 0 0 0 15
00 55 0 0 0 0 7
00 56 0 0 0 0 15
00 57 0 0 0 0 15
00 58 0 0 0 0 15
00 59 0 0 0 0 15
00 60 0 0 0 0 15
00 61 0 0 0 0 15
00 62 0 0 0 0 15
00 63 0 0 0 0 9
01 00 0 0 0 0 0
01 01 0 0 0 0 0
01 02 0 0 0 0 8
01 03 0 0 0 0 4
01 04 0 0 0 0 9
01 05 0 0 0 0 0
01 06 0 0 0 0 9
01 07 0 0 0 0 0
01 08 0 0 0 0 15
01 09 0 0 0 0 0
01 10 0 0 0 0 15
01 11 0 0 0 0 1
01 12 0 0 0 0 13
01 13 0 0 0 0 0
01 14 0 0 0 0 0
01 15 0 0 0 0 7
01 16 0 0 0 0 15
01 17 0 0 0 0 0
01 18 0 0 0 0 6
01 19 0 0 0 0 4
01 20 0 0 0 0 6
01 21 0 0 0 0 0
01 22 0 0 0 0 0
01 23 0 0 0 0 14
01 24 0 0 0 0 1
01 25 0 0 0 0 6
01 26 0 0 0 0 7
01 27 0 0 0 0 0
01 28 0 0 0 0 13
01 29 0 0 0 0 0
01 30 0 0 0 0 15
01 31 0 0 0 0 7
01 32 0 0 0 0 15
01 33 0 0 0 0 13
01 34 0 0 0 0 15
01 35 0 0 0 0 0
01 36 0 0 0 0 0
01 37 0 0 0 0 0
01 38 0 0 0 0 15
01 39 0 0 0 0 0
01 40 0 0 0 0 1
01 41 0 0 0 0 0
01 42 0 0 0 0 0
01 43 0 0 0 0 15
01 44 0 0 0 0 12
01 45 0 0 0 0 7
01 46 0 0 0 0 15
01 47 0 0 0 0 8
01 48 0 0 0 0 11
01 49 0 0 0 0 0
01 50 0 0 0 0 15
01 51 0 0 0 0 3
01 52 0 0 0 0 15
01 53 0 0 0 0 2
01 54 0 0 0 0 15
01 55 0 0 0 0 7
01 56 0 0 0 0 15
01 57 0 0 0 0 15
01 58 0 0 0 0 15
01 59 0 0 0 0 0
01 60 0 0 0 0 15
01 61 0 0 0 0 14
01 62 0 0 0 0 6
01 63 0 0 0 0 7
02 00 0 0 0 0 15
02 01 0 0 0 0 3
02 02 0 0 0 0 5
02 03 0 0 0 0 0
02 04 0 0 0 0 6
02 05 0 0 0 0 0
02 06 0 0 0 0 7
02 07 0 0 0 0 4
02 08 0 0 0 0 8
02 09 0 0 0 0 6
02 10 0 0 0 0 15
02 11 0 0 0 0 0
02 12 0 0 0 0 12
02 13 0 0 0 0 5
02 14 0 0 0 0 4
02 15 0 0 0 0 0
02 16 0 0 0 0 15
02 17 0 0 0 0 0
02 18 0 0 0 0 15
02 19 0 0 0 0 0
02 20 0 0 0 0 7
02 21 0 0 0 0 15
02 22 0 0 0 0 5
02 23 0 0 0 0 0
02 24 0 0 0 0 6
02 25 0 0 0 0 0
02 26 0 0 0 0 15
02 27 0 0 0 0 9
02 28 0 0 0 0 10
02 29 0 0 0 0 0
02 30 0 0 0 0 10
02 31 0 0 0 0 11
02 32 0 0 0 0 13
02 33 0 0 0 0 13
02 34 0 0 0 0 15
02 35 0 0 0 0 0
02 36 0 0 0 0 15
02 37 0 0 0 0 4
02 38 0 0 0 0 0
02 39 0 0 0 0 0
02 40 0 0 0 0 6
02 41 0 0 0 0 7
02 42 0 0 0 0 15
02 43 0 0 0 0 6
02 44 0 0 0 0 10
02 45 0 0 0 0 4
02 46 0 0 0 0 15
02 47 0 0 0 0 15
02 48 0 0 0 0 15
02 49 0 0 0 0 9
02 50 0 0 0 0 3
02 51 0 0 0 0 7
02 52 0 0 0 0 15
02 53 0 0 0 0 9
02 54 0 0 0 0 15
02 55 0 0 0 0 3
02 56 0 0 0 0 14
02 57 0 0 0 0 15
02 58 0 0 0 0 15
02 59 0 0 0 0 14
02 60 0 0 0 0 15
02 61 0 0 0 0 9
02 62 0 0 0 0 15
02 63 0 0 0 0 15
03 00 0 0 0 0 15
03 01 0 0 0 0 14
03 02 0 0 0 0 15
03 03 0 0 0 0 10
03 04 0 0 0 0 15
03 05 0 0 0 0 0
03 06 0 0 0 0 0
03 07 0 0 0 0 0
03 08 0 0 0 0 15
03 09 0 0 0 0 8
03 10 0 0 0 0 14
03 11 0 0 0 0 0
03 12 0 0 0 0 12
03 13 0 0 0 0 0
03 14 0 0 0 0 11
03 15 0 0 0 0 6
03 16 0 0 0 0 15
03 17 0 0 0 0 0
03 18 0 0 0 0 15
03 19 0 0 0 0 0
03 20 0 0 0 0 15
03 21 0 0 0 0 8
03 22 0 0 0 0 8
03 23 0 0 0 0 14
03 24 0 0 0 0 15
03 25 0 0 0 0 0
03 26 0 0 0 0 14
03 27 0 0 0 0 15
03 28 0 0 0 0 5
03 29 0 0 0 0 0
03 30 0 0 0 0 4
03 31 0 0 0 0 0
03 32 0 0 0 0 7
03 33 0 0 0 0 7
03 34 0 0 0 0 15
03 35 0 0 0 0 0
03 36 0 0 0 0 8
03 37 0 0 0 0 0
03 38 0 0 0 0 15
03 39 0 0 0 0 7
03 40 0 0 0 0 6
03 41 0 0 0 0 4
03 42 0 0 0 0 13
03 43 0 0 0 0 6
03 44 0 0 0 0 15
03 45 0 0 0 0 8
03 46 0 0 0 0 5
03 47 0 0 0 0 0
03 48 0 0 0 0 0
03 49 0 0 0 0 9
03 50 0 0 0 0 12
03 51 0 0 0 0 13
03 52 0 0 0 0 7
03 53 0 0 0 0 0
03 54 0 0 0 0 15
03 55 0 0 0 0 0
03 56 0 0 0 0 6
03 57 0 0 0 0 11
03 58 0 0 0 0 12
03 59 0 0 0 0 7
03 60 0 0 0 0 11
03 61 0 0 0 0 15
03 62 0 0 0 0 9
03 63 0 0 0 0 0
04 00 0 0 0 0 10
04 01 0 0 0 0 12
04 02 0 0 0 0 4
04 03 0 0 0 0 0
04 04 0 0 0 0 0
04 05 0 0 0 0 0
04 06 0 0 0 0 7
04 07 0 0 0 0 6
04 08 0 0 0 0 15
04 09 0 0 0 0 4
04 10 0 0 0 0 4
04 11 0 0 0 0 2
04 12 0 0 0 0 15
04 13 0 0 0 0 0
04 14 0 0 0 0 5
04 15 0 0 0 0 8
04 16 0 0 0 0 8
04 17 0 0 0 0 6
04 18 0 0 0 0 6
04 19 0 0 0 0 3
04 20 0 0 0 0 13
04 21 0 0 0 0 15
04 22 0 0 0 0 15
04 23 0 0 0 0 7
04 24 0 0 0 0 15
04 25 0 0 0 0 8
04 26 0 0 0 0 8
04 27 0 0 0 0 8
04 28 0 0 0 0 11
04 29 0 0 0 0 8
04 30 0 0 0 0 3
04 31 0 0 0 0 2
04 32 0 0 0 0 15
04 33 0 0 0 0 10
04 34 0 0 0 0 15
04 35 0 0 0 0 7
04 36 0 0 0 0 15
04 37 0 0 0 0 0
... 3802 more lines ...
|
| Attachment 4: mpw4.conf
|
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",".
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"
[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200
## HDMI CONFIGURATION
# 4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
# Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
# Enable/Disable clock on differential LEMO
LEMOclk = 0
## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0
## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2
in0_STR = 0 # 0
in0_DEL = 0 # 18
in1_STR = 0 # 0
in1_DEL = 0 # 18
in2_STR = 0 # 0
in2_DEL = 0 # 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00
## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.025 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12
## DUT CONFIGURATION
# DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0x6
# DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x30 #0x00
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben
# Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1
# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)
## DATA COLLECTOR
EUDAQ_DC= tlu_dc
## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1
[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing
[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /media/silicon/testbeam_data/mpw4_maus_240825/tlu/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[Producer.RD50_MPW4_0]
#register_key = "vnfb"
#register_value = 0x12
[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/mpw4_maus_240825/mpw4/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1
[Monitor.mpw4_mon]
ENABLE_PRINT = 0
ENABLE_STD_PRINT = 0
ENABLE_STD_CONVERTER = 1
FORWARD2GUI = 1
[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4_base.txt, matrix_mpw4_piggy.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
|
|
110
|
Sun Aug 25 07:03:33 2024 |
tb-crew | Piggy test | 49 | RD50-MPW4 | 800 MeV | Low Flux Very Low | Proton | Unknown | 25.08.2024 07:02:24 | 25.08.2024 07:04:00 | 1 | Normal | | |
automatic log for run 49
Comment:
data is correlated |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = cBase
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_base.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 4
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0.7
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 1.15
th__i = 3
[RD50_MPW4_Piggy]
this_config_file = config.cfg
#SEC::MISC
calib_file = cPiggy
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 0
execute_file = execute.txt
i2c_addr = 0x47
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_piggy.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 4
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
|
| Attachment 2: matrix_mpw4_base.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 15
00 01 0 0 0 0 0
00 02 0 0 0 0 15
00 03 0 0 0 0 13
00 04 0 0 0 0 11
00 05 0 0 0 0 15
00 06 0 0 0 0 15
00 07 0 0 0 0 8
00 08 0 0 0 0 0
00 09 0 0 0 0 15
00 10 0 0 0 0 8
00 11 0 0 0 0 7
00 12 0 0 0 0 15
00 13 0 0 0 0 0
00 14 0 0 0 0 8
00 15 0 0 0 0 4
00 16 0 0 0 0 3
00 17 0 0 0 0 15
00 18 0 0 0 0 15
00 19 0 0 0 0 15
00 20 0 0 0 0 0
00 21 0 0 0 0 0
00 22 0 0 0 0 15
00 23 0 0 0 0 9
00 24 0 0 0 0 15
00 25 0 0 0 0 6
00 26 0 0 0 0 0
00 27 0 0 0 0 0
00 28 0 0 0 0 14
00 29 0 0 0 0 0
00 30 0 0 0 0 7
00 31 0 0 0 0 0
00 32 0 0 0 0 12
00 33 0 0 0 0 5
00 34 0 0 0 0 15
00 35 0 0 0 0 12
00 36 0 0 0 0 15
00 37 0 0 0 0 11
00 38 0 0 0 0 0
00 39 0 0 0 0 9
00 40 0 0 0 0 15
00 41 0 0 0 0 0
00 42 0 0 0 0 15
00 43 0 0 0 0 4
00 44 0 0 0 0 1
00 45 0 0 0 0 15
00 46 0 0 0 0 1
00 47 0 0 0 0 0
00 48 0 0 0 0 0
00 49 0 0 0 0 0
00 50 0 0 0 0 0
00 51 0 0 0 0 0
00 52 0 0 0 0 15
00 53 0 0 0 0 8
00 54 0 0 0 0 11
00 55 0 0 0 0 11
00 56 0 0 0 0 15
00 57 0 0 0 0 0
00 58 0 0 0 0 4
00 59 0 0 0 0 0
00 60 0 0 0 0 12
00 61 0 0 0 0 0
00 62 0 0 0 0 15
00 63 0 0 0 0 15
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 15
01 03 0 0 0 0 3
01 04 0 0 0 0 7
01 05 0 0 0 0 0
01 06 0 0 0 0 5
01 07 0 0 0 0 12
01 08 0 0 0 0 11
01 09 0 0 0 0 15
01 10 0 0 0 0 8
01 11 0 0 0 0 7
01 12 0 0 0 0 14
01 13 0 0 0 0 15
01 14 0 0 0 0 14
01 15 0 0 0 0 0
01 16 0 0 0 0 0
01 17 0 0 0 0 15
01 18 0 0 0 0 1
01 19 0 0 0 0 15
01 20 0 0 0 0 6
01 21 0 0 0 0 15
01 22 0 0 0 0 0
01 23 0 0 0 0 15
01 24 0 0 0 0 0
01 25 0 0 0 0 0
01 26 0 0 0 0 6
01 27 0 0 0 0 4
01 28 0 0 0 0 0
01 29 0 0 0 0 0
01 30 0 0 0 0 0
01 31 0 0 0 0 0
01 32 0 0 0 0 10
01 33 0 0 0 0 6
01 34 0 0 0 0 15
01 35 0 0 0 0 11
01 36 0 0 0 0 4
01 37 0 0 0 0 9
01 38 0 0 0 0 15
01 39 0 0 0 0 10
01 40 0 0 0 0 12
01 41 0 0 0 0 5
01 42 0 0 0 0 15
01 43 0 0 0 0 0
01 44 0 0 0 0 5
01 45 0 0 0 0 15
01 46 0 0 0 0 10
01 47 0 0 0 0 0
01 48 0 0 0 0 0
01 49 0 0 0 0 8
01 50 0 0 0 0 15
01 51 0 0 0 0 6
01 52 0 0 0 0 4
01 53 0 0 0 0 0
01 54 0 0 0 0 15
01 55 0 0 0 0 0
01 56 0 0 0 0 10
01 57 0 0 0 0 15
01 58 0 0 0 0 0
01 59 0 0 0 0 5
01 60 0 0 0 0 8
01 61 0 0 0 0 14
01 62 0 0 0 0 11
01 63 0 0 0 0 15
02 00 0 0 0 0 3
02 01 0 0 0 0 15
02 02 0 0 0 0 15
02 03 0 0 0 0 13
02 04 0 0 0 0 15
02 05 0 0 0 0 11
02 06 0 0 0 0 15
02 07 0 0 0 0 15
02 08 0 0 0 0 15
02 09 0 0 0 0 12
02 10 0 0 0 0 11
02 11 0 0 0 0 0
02 12 0 0 0 0 7
02 13 0 0 0 0 9
02 14 0 0 0 0 11
02 15 0 0 0 0 2
02 16 0 0 0 0 15
02 17 0 0 0 0 13
02 18 0 0 0 0 12
02 19 0 0 0 0 15
02 20 0 0 0 0 15
02 21 0 0 0 0 7
02 22 0 0 0 0 2
02 23 0 0 0 0 15
02 24 0 0 0 0 10
02 25 0 0 0 0 9
02 26 0 0 0 0 7
02 27 0 0 0 0 5
02 28 0 0 0 0 15
02 29 0 0 0 0 15
02 30 0 0 0 0 14
02 31 0 0 0 0 15
02 32 0 0 0 0 13
02 33 0 0 0 0 7
02 34 0 0 0 0 0
02 35 0 0 0 0 7
02 36 0 0 0 0 1
02 37 0 0 0 0 15
02 38 0 0 0 0 3
02 39 0 0 0 0 11
02 40 0 0 0 0 7
02 41 0 0 0 0 13
02 42 0 0 0 0 4
02 43 0 0 0 0 15
02 44 0 0 0 0 0
02 45 0 0 0 0 15
02 46 0 0 0 0 15
02 47 0 0 0 0 0
02 48 0 0 0 0 8
02 49 0 0 0 0 15
02 50 0 0 0 0 0
02 51 0 0 0 0 12
02 52 0 0 0 0 7
02 53 0 0 0 0 11
02 54 0 0 0 0 0
02 55 0 0 0 0 2
02 56 0 0 0 0 0
02 57 0 0 0 0 0
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 14
02 61 0 0 0 0 15
02 62 0 0 0 0 0
02 63 0 0 0 0 12
03 00 0 0 0 0 11
03 01 0 0 0 0 15
03 02 0 0 0 0 3
03 03 0 0 0 0 0
03 04 0 0 0 0 14
03 05 0 0 0 0 15
03 06 0 0 0 0 5
03 07 0 0 0 0 7
03 08 0 0 0 0 0
03 09 0 0 0 0 10
03 10 0 0 0 0 0
03 11 0 0 0 0 0
03 12 0 0 0 0 15
03 13 0 0 0 0 5
03 14 0 0 0 0 15
03 15 0 0 0 0 0
03 16 0 0 0 0 0
03 17 0 0 0 0 15
03 18 0 0 0 0 15
03 19 0 0 0 0 0
03 20 0 0 0 0 2
03 21 0 0 0 0 0
03 22 0 0 0 0 3
03 23 0 0 0 0 6
03 24 0 0 0 0 8
03 25 0 0 0 0 0
03 26 0 0 0 0 15
03 27 0 0 0 0 4
03 28 0 0 0 0 10
03 29 0 0 0 0 15
03 30 0 0 0 0 0
03 31 0 0 0 0 15
03 32 0 0 0 0 0
03 33 0 0 0 0 0
03 34 0 0 0 0 6
03 35 0 0 0 0 7
03 36 0 0 0 0 8
03 37 0 0 0 0 7
03 38 0 0 0 0 15
03 39 0 0 0 0 15
03 40 0 0 0 0 0
03 41 0 0 0 0 0
03 42 0 0 0 0 15
03 43 0 0 0 0 15
03 44 0 0 0 0 1
03 45 0 0 0 0 15
03 46 0 0 0 0 3
03 47 0 0 0 0 1
03 48 0 0 0 0 3
03 49 0 0 0 0 12
03 50 0 0 0 0 0
03 51 0 0 0 0 1
03 52 0 0 0 0 4
03 53 0 0 0 0 14
03 54 0 0 0 0 3
03 55 0 0 0 0 15
03 56 0 0 0 0 10
03 57 0 0 0 0 0
03 58 0 0 0 0 15
03 59 0 0 0 0 8
03 60 0 0 0 0 0
03 61 0 0 0 0 0
03 62 0 0 0 0 0
03 63 0 0 0 0 3
04 00 0 0 0 0 0
04 01 0 0 0 0 15
04 02 0 0 0 0 15
04 03 0 0 0 0 2
04 04 0 0 0 0 10
04 05 0 0 0 0 15
04 06 0 0 0 0 15
04 07 0 0 0 0 15
04 08 0 0 0 0 3
04 09 0 0 0 0 0
04 10 0 0 0 0 0
04 11 0 0 0 0 14
04 12 0 0 0 0 11
04 13 0 0 0 0 9
04 14 0 0 0 0 0
04 15 0 0 0 0 15
04 16 0 0 0 0 0
04 17 0 0 0 0 7
04 18 0 0 0 0 12
04 19 0 0 0 0 15
04 20 0 0 0 0 15
04 21 0 0 0 0 8
04 22 0 0 0 0 5
04 23 0 0 0 0 15
04 24 0 0 0 0 5
04 25 0 0 0 0 0
04 26 0 0 0 0 14
04 27 0 0 0 0 13
04 28 0 0 0 0 13
04 29 0 0 0 0 12
04 30 0 0 0 0 0
04 31 0 0 0 0 2
04 32 0 0 0 0 7
04 33 0 0 0 0 3
04 34 0 0 0 0 8
04 35 0 0 0 0 0
04 36 0 0 0 0 0
04 37 0 0 0 0 15
... 3802 more lines ...
|
| Attachment 3: matrix_mpw4_piggy.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 1 0 0 0
00 01 0 0 0 0 0
00 02 0 0 0 0 15
00 03 0 0 0 0 11
00 04 0 0 0 0 11
00 05 0 0 0 0 6
00 06 0 0 0 0 0
00 07 0 0 0 0 0
00 08 0 0 0 0 7
00 09 0 0 0 0 3
00 10 0 0 0 0 15
00 11 0 0 0 0 6
00 12 0 0 0 0 6
00 13 0 0 0 0 5
00 14 0 0 0 0 15
00 15 0 0 0 0 15
00 16 0 0 0 0 1
00 17 0 0 0 0 15
00 18 0 0 0 0 15
00 19 0 0 0 0 7
00 20 0 0 0 0 6
00 21 0 0 0 0 0
00 22 0 0 0 0 15
00 23 0 0 0 0 10
00 24 0 0 0 0 14
00 25 0 0 0 0 0
00 26 0 0 0 0 15
00 27 0 0 0 0 0
00 28 0 0 0 0 3
00 29 0 0 0 0 0
00 30 0 0 0 0 11
00 31 0 0 0 0 0
00 32 0 0 0 0 6
00 33 0 0 0 0 6
00 34 0 0 0 0 11
00 35 0 0 0 0 7
00 36 0 0 0 0 15
00 37 0 0 0 0 15
00 38 0 0 0 0 8
00 39 0 0 0 0 0
00 40 0 0 0 0 1
00 41 0 0 0 0 7
00 42 0 0 0 0 8
00 43 0 0 0 0 0
00 44 0 0 0 0 7
00 45 0 0 0 0 9
00 46 0 0 0 0 15
00 47 0 0 0 0 10
00 48 0 0 0 0 15
00 49 0 0 0 0 6
00 50 0 0 0 0 14
00 51 0 0 0 0 15
00 52 0 0 0 0 15
00 53 0 0 0 0 6
00 54 0 0 0 0 15
00 55 0 0 0 0 7
00 56 0 0 0 0 15
00 57 0 0 0 0 15
00 58 0 0 0 0 15
00 59 0 0 0 0 15
00 60 0 0 0 0 15
00 61 0 0 0 0 15
00 62 0 0 0 0 15
00 63 0 0 0 0 9
01 00 0 0 0 0 0
01 01 0 0 0 0 0
01 02 0 0 0 0 8
01 03 0 0 0 0 4
01 04 0 0 0 0 9
01 05 0 0 0 0 0
01 06 0 0 0 0 9
01 07 0 0 0 0 0
01 08 0 0 0 0 15
01 09 0 0 0 0 0
01 10 0 0 0 0 15
01 11 0 0 0 0 1
01 12 0 0 0 0 13
01 13 0 0 0 0 0
01 14 0 0 0 0 0
01 15 0 0 0 0 7
01 16 0 0 0 0 15
01 17 0 0 0 0 0
01 18 0 0 0 0 6
01 19 0 0 0 0 4
01 20 0 0 0 0 6
01 21 0 0 0 0 0
01 22 0 0 0 0 0
01 23 0 0 0 0 14
01 24 0 0 0 0 1
01 25 0 0 0 0 6
01 26 0 0 0 0 7
01 27 0 0 0 0 0
01 28 0 0 0 0 13
01 29 0 0 0 0 0
01 30 0 0 0 0 15
01 31 0 0 0 0 7
01 32 0 0 0 0 15
01 33 0 0 0 0 13
01 34 0 0 0 0 15
01 35 0 0 0 0 0
01 36 0 0 0 0 0
01 37 0 0 0 0 0
01 38 0 0 0 0 15
01 39 0 0 0 0 0
01 40 0 0 0 0 1
01 41 0 0 0 0 0
01 42 0 0 0 0 0
01 43 0 0 0 0 15
01 44 0 0 0 0 12
01 45 0 0 0 0 7
01 46 0 0 0 0 15
01 47 0 0 0 0 8
01 48 0 0 0 0 11
01 49 0 0 0 0 0
01 50 0 0 0 0 15
01 51 0 0 0 0 3
01 52 0 0 0 0 15
01 53 0 0 0 0 2
01 54 0 0 0 0 15
01 55 0 0 0 0 7
01 56 0 0 0 0 15
01 57 0 0 0 0 15
01 58 0 0 0 0 15
01 59 0 0 0 0 0
01 60 0 0 0 0 15
01 61 0 0 0 0 14
01 62 0 0 0 0 6
01 63 0 0 0 0 7
02 00 0 0 0 0 15
02 01 0 0 0 0 3
02 02 0 0 0 0 5
02 03 0 0 0 0 0
02 04 0 0 0 0 6
02 05 0 0 0 0 0
02 06 0 0 0 0 7
02 07 0 0 0 0 4
02 08 0 0 0 0 8
02 09 0 0 0 0 6
02 10 0 0 0 0 15
02 11 0 0 0 0 0
02 12 0 0 0 0 12
02 13 0 0 0 0 5
02 14 0 0 0 0 4
02 15 0 0 0 0 0
02 16 0 0 0 0 15
02 17 0 0 0 0 0
02 18 0 0 0 0 15
02 19 0 0 0 0 0
02 20 0 0 0 0 7
02 21 0 0 0 0 15
02 22 0 0 0 0 5
02 23 0 0 0 0 0
02 24 0 0 0 0 6
02 25 0 0 0 0 0
02 26 0 0 0 0 15
02 27 0 0 0 0 9
02 28 0 0 0 0 10
02 29 0 0 0 0 0
02 30 0 0 0 0 10
02 31 0 0 0 0 11
02 32 0 0 0 0 13
02 33 0 0 0 0 13
02 34 0 0 0 0 15
02 35 0 0 0 0 0
02 36 0 0 0 0 15
02 37 0 0 0 0 4
02 38 0 0 0 0 0
02 39 0 0 0 0 0
02 40 0 0 0 0 6
02 41 0 0 0 0 7
02 42 0 0 0 0 15
02 43 0 0 0 0 6
02 44 0 0 0 0 10
02 45 0 0 0 0 4
02 46 0 0 0 0 15
02 47 0 0 0 0 15
02 48 0 0 0 0 15
02 49 0 0 0 0 9
02 50 0 0 0 0 3
02 51 0 0 0 0 7
02 52 0 0 0 0 15
02 53 0 0 0 0 9
02 54 0 0 0 0 15
02 55 0 0 0 0 3
02 56 0 0 0 0 14
02 57 0 0 0 0 15
02 58 0 0 0 0 15
02 59 0 0 0 0 14
02 60 0 0 0 0 15
02 61 0 0 0 0 9
02 62 0 0 0 0 15
02 63 0 0 0 0 15
03 00 0 0 0 0 15
03 01 0 0 0 0 14
03 02 0 0 0 0 15
03 03 0 0 0 0 10
03 04 0 0 0 0 15
03 05 0 0 0 0 0
03 06 0 0 0 0 0
03 07 0 0 0 0 0
03 08 0 0 0 0 15
03 09 0 0 0 0 8
03 10 0 0 0 0 14
03 11 0 0 0 0 0
03 12 0 0 0 0 12
03 13 0 0 0 0 0
03 14 0 0 0 0 11
03 15 0 0 0 0 6
03 16 0 0 0 0 15
03 17 0 0 0 0 0
03 18 0 0 0 0 15
03 19 0 0 0 0 0
03 20 0 0 0 0 15
03 21 0 0 0 0 8
03 22 0 0 0 0 8
03 23 0 0 0 0 14
03 24 0 0 0 0 15
03 25 0 0 0 0 0
03 26 0 0 0 0 14
03 27 0 0 0 0 15
03 28 0 0 0 0 5
03 29 0 0 0 0 0
03 30 0 0 0 0 4
03 31 0 0 0 0 0
03 32 0 0 0 0 7
03 33 0 0 0 0 7
03 34 0 0 0 0 15
03 35 0 0 0 0 0
03 36 0 0 0 0 8
03 37 0 0 0 0 0
03 38 0 0 0 0 15
03 39 0 0 0 0 7
03 40 0 0 0 0 6
03 41 0 0 0 0 4
03 42 0 0 0 0 13
03 43 0 0 0 0 6
03 44 0 0 0 0 15
03 45 0 0 0 0 8
03 46 0 0 0 0 5
03 47 0 0 0 0 0
03 48 0 0 0 0 0
03 49 0 0 0 0 9
03 50 0 0 0 0 12
03 51 0 0 0 0 13
03 52 0 0 0 0 7
03 53 0 0 0 0 0
03 54 0 0 0 0 15
03 55 0 0 0 0 0
03 56 0 0 0 0 6
03 57 0 0 0 0 11
03 58 0 0 0 0 12
03 59 0 0 0 0 7
03 60 0 0 0 0 11
03 61 0 0 0 0 15
03 62 0 0 0 0 9
03 63 0 0 0 0 0
04 00 0 0 0 0 10
04 01 0 0 0 0 12
04 02 0 0 0 0 4
04 03 0 0 0 0 0
04 04 0 0 0 0 0
04 05 0 0 0 0 0
04 06 0 0 0 0 7
04 07 0 0 0 0 6
04 08 0 0 0 0 15
04 09 0 0 0 0 4
04 10 0 0 0 0 4
04 11 0 0 0 0 2
04 12 0 0 0 0 15
04 13 0 0 0 0 0
04 14 0 0 0 0 5
04 15 0 0 0 0 8
04 16 0 0 0 0 8
04 17 0 0 0 0 6
04 18 0 0 0 0 6
04 19 0 0 0 0 3
04 20 0 0 0 0 13
04 21 0 0 0 0 15
04 22 0 0 0 0 15
04 23 0 0 0 0 7
04 24 0 0 0 0 15
04 25 0 0 0 0 8
04 26 0 0 0 0 8
04 27 0 0 0 0 8
04 28 0 0 0 0 11
04 29 0 0 0 0 8
04 30 0 0 0 0 3
04 31 0 0 0 0 2
04 32 0 0 0 0 15
04 33 0 0 0 0 10
04 34 0 0 0 0 15
04 35 0 0 0 0 7
04 36 0 0 0 0 15
04 37 0 0 0 0 0
... 3802 more lines ...
|
| Attachment 4: mpw4.conf
|
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",".
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"
[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200
## HDMI CONFIGURATION
# 4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
# Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
# Enable/Disable clock on differential LEMO
LEMOclk = 0
## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0
## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2
in0_STR = 0 # 0
in0_DEL = 0 # 18
in1_STR = 0 # 0
in1_DEL = 0 # 18
in2_STR = 0 # 0
in2_DEL = 0 # 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00
## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.025 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12
## DUT CONFIGURATION
# DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0x6
# DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x30 #0x00
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben
# Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1
# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)
## DATA COLLECTOR
EUDAQ_DC= tlu_dc
## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1
[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing
[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /media/silicon/testbeam_data/mpw4_maus_240825/tlu/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[Producer.RD50_MPW4_0]
#register_key = "vnfb"
#register_value = 0x12
[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/mpw4_maus_240825/mpw4/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1
[Monitor.mpw4_mon]
ENABLE_PRINT = 0
ENABLE_STD_PRINT = 0
ENABLE_STD_CONVERTER = 1
FORWARD2GUI = 1
[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4_base.txt, matrix_mpw4_piggy.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
|
|
141
|
Sat Dec 14 12:52:02 2024 |
Felix Ulrich-Pur | Shift 23.11.24 low flux He test with RaMon | 2 | RaMon | 177.8 MeV/u | Low Flux Medium | Helium | Good | 06:31 | 06:32 | 1 | | | |
Mean rate per spill~ 6-8E5 p/s (online estimation without proper analysis) |
|
142
|
Sat Dec 14 12:52:57 2024 |
Felix Ulrich-Pur | Shift 23.11.24 low flux He test with RaMon | 3 | RaMon | 147.2 MeV/u | Low Flux Medium | Helium | Good | 06:32 | 06:33 | 1 | | | |
Mean rate per spill~ 2.5-4-5E5 p/s (online estimation without proper analysis) |
|
143
|
Sat Dec 14 12:53:28 2024 |
Felix Ulrich-Pur | Shift 23.11.24 low flux He test with RaMon | 4 | RaMon | 124.4 MeV/u | Low Flux Medium | Helium | Good | 06:33 | 06:33 | 1 | | | |
Mean rate per spill~ 2-8E5 p/s (online estimation without proper analysis) |
|
144
|
Sat Dec 14 12:54:04 2024 |
Felix Ulrich-Pur | Shift 23.11.24 low flux He test with RaMon | 5 | RaMon | 97.2MeV/u | Low Flux Medium | Helium | Good | 06:33 | 06:33 | 1 | | | |
Mean rate per spill~ 1-5E5 p/s (online estimation without proper analysis) |
|
145
|
Sat Dec 14 12:54:55 2024 |
Felix Ulrich-Pur | Shift 23.11.24 low flux He test with RaMon | 6 | RaMon | 73.2 MeV/u | Low Flux Medium | Helium | Good | 06:34 | 06:34 | 1 | | | |
Mean rate per spill~ 4.5-8E5 p/s (online estimation without proper analysis) |
|
146
|
Sat Dec 14 12:55:41 2024 |
Felix Ulrich-Pur | Shift 23.11.24 low flux He test with RaMon | 7 | RaMon | 63.3 MeV/u | Low Flux Medium | Helium | Good | 06:35 | 06:36 | 1 | | | |
Mean rate per spill~ 2-5E5 p/s (online estimation without proper analysis) |
|
147
|
Sat Dec 14 12:56:05 2024 |
Felix Ulrich-Pur | Shift 23.11.24 low flux He test with RaMon | 8 | RaMon | 205.2 MeV/u | Low Flux High | Helium | Good | 06:39 | 06:40 | 1 | | | |
Mean rate per spill~ 5e6 p/s (online estimation without proper analysis) |
|
148
|
Sat Dec 14 12:56:38 2024 |
Felix Ulrich-Pur | Shift 23.11.24 low flux He test with RaMon | 9 | RaMon | 177.8 MeV/u | Low Flux High | Helium | Good | 06:40 | 06:41 | 1 | | | |
Mean rate per spill~ 4.5e6 p/s (online estimation without proper analysis) |
|
149
|
Sat Dec 14 12:57:13 2024 |
Felix Ulrich-Pur | Shift 23.11.24 low flux He test with RaMon | 10 | RaMon | 147.2 MeV/u | Low Flux High | Helium | Good | 06:42 | 06:42 | 1 | | | |
Mean rate per spill~ 3..5e6 p/s (online estimation without proper analysis) |
|
150
|
Sat Dec 14 12:58:35 2024 |
Felix Ulrich-Pur | Shift 23.11.24 low flux He test with RaMon | 11 | RaMon | 124.4 MeV/u | Low Flux High | Helium | Good | 06:43 | 06:43 | 1 | | | |
Mean rate per spill~ 4Ee6 p/s (online estimation without proper analysis) |
|
151
|
Sat Dec 14 12:59:33 2024 |
Felix Ulrich-Pur | Shift 23.11.24 low flux He test with RaMon | 12 | RaMon | 97.2MeV/u | Low Flux High | Helium | Good | 06:43 | 06:44 | 1 | | | |
Mean rate per spill~ 6Ee6 p/s (online estimation without proper analysis) |
|
152
|
Sat Dec 14 13:00:26 2024 |
Felix Ulrich-Pur | Shift 23.11.24 low flux He test with RaMon | 13 | RaMon | 73.2 MeV/u | Low Flux High | Helium | Good | 06:44 | 06:45 | 1 | | | |
Mean rate per spill~ 4Ee6 p/s (online estimation without proper analysis) |
|
153
|
Sat Dec 14 13:01:14 2024 |
Felix Ulrich-Pur | Shift 23.11.24 low flux He test with RaMon | 14 | RaMon | 63.3 MeV/u | Low Flux High | Helium | Good | 06:46 | 06:46 | 1 | | | |
Mean rate per spill~ 5Ee6 p/s (online estimation without proper analysis) |
|
3
|
Sat Mar 30 06:54:51 2024 |
bp, ci, hh | RD50-MPW4 | 1000 | RD50-MPW4 | 800 MeV | Low Flux Very Low | Proton | Unknown | 30.03.2024 06:56:23 | 30.03.2024 06:57:18 | 0 | Normal | | |
automatic log for run 1000
Comment:
1st test runs |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 511
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.92
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: mpw4.conf
|
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",".
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"
[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200
## HDMI CONFIGURATION
# 4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
# Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
# Enable/Disable clock on differential LEMO
LEMOclk = 0
## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0
## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2
in0_STR = 0 # 0
in0_DEL = 0 # 18
in1_STR = 0 # 0
in1_DEL = 0 # 18
in2_STR = 0 # 0
in2_DEL = 0 # 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 1000 #4000 #00
## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12
## DUT CONFIGURATION
# DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0x6
# DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x30 #0x00
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben
# Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1
# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)
## DATA COLLECTOR
EUDAQ_DC= tlu_dc
## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1
[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing
[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[Producer.RD50_MPW4_0]
[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1
[Monitor.mpw4_mon]
ENABLE_PRINT = 0
ENABLE_STD_PRINT = 0
ENABLE_STD_CONVERTER = 1
FORWARD2GUI = 1
[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
|
|
5
|
Sat Mar 30 07:09:36 2024 |
bp, ci, hh | RD50-MPW4 | 1002 | RD50-MPW4 | 800 MeV | Low Flux Very Low | Proton | Unknown | 30.03.2024 07:11:15 | 30.03.2024 07:12:03 | 0 | Normal | | |
automatic log for run 1002
Comment:
1st test runs |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 511
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.92
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: mpw4.conf
|
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",".
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"
[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200
## HDMI CONFIGURATION
# 4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
# Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
# Enable/Disable clock on differential LEMO
LEMOclk = 0
## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0
## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2
in0_STR = 0 # 0
in0_DEL = 0 # 18
in1_STR = 0 # 0
in1_DEL = 0 # 18
in2_STR = 0 # 0
in2_DEL = 0 # 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00
## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12
## DUT CONFIGURATION
# DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0x6
# DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x30 #0x00
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben
# Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1
# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)
## DATA COLLECTOR
EUDAQ_DC= tlu_dc
## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1
[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing
[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[Producer.RD50_MPW4_0]
[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1
[Monitor.mpw4_mon]
ENABLE_PRINT = 0
ENABLE_STD_PRINT = 0
ENABLE_STD_CONVERTER = 1
FORWARD2GUI = 1
[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
|
|
31
|
Sat Mar 30 10:23:06 2024 |
bp, ci, hh | RD50-MPW4 | 1017 | RD50-MPW4 | 800 MeV | Low Flux Low | Proton | Crap | 30.03.2024 10:25:09 | 30.03.2024 10:25:33 | 0 | Normal | | |
automatic log for run 1017
Comment:
changed rate to low again, too much "noise"
also moved table down and a bit to the left
no HV, is crap |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 511
matrix_config = matrix_mpw4.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.92
th__i = 3
|
| Attachment 2: matrix_mpw4.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 13
00 01 0 0 0 0 4
00 02 0 0 0 0 9
00 03 0 0 0 0 12
00 04 0 0 0 0 7
00 05 0 0 0 0 10
00 06 0 0 0 0 8
00 07 0 0 0 0 8
00 08 0 0 0 0 8
00 09 0 0 0 0 9
00 10 0 0 0 0 10
00 11 0 0 0 0 5
00 12 0 0 0 0 14
00 13 0 0 0 0 6
00 14 0 0 0 0 7
00 15 0 0 0 0 3
00 16 0 0 0 0 5
00 17 0 0 0 0 15
00 18 0 0 0 0 12
00 19 0 0 0 0 11
00 20 0 0 0 0 6
00 21 0 0 0 0 5
00 22 0 0 0 0 7
00 23 0 0 0 0 6
00 24 0 0 0 0 10
00 25 0 0 0 0 4
00 26 0 0 0 0 6
00 27 0 0 0 0 0
00 28 0 0 0 0 6
00 29 0 0 0 0 6
00 30 0 0 0 0 11
00 31 0 0 0 0 3
00 32 0 0 0 0 6
00 33 0 0 0 0 8
00 34 0 0 0 0 9
00 35 0 0 0 0 8
00 36 0 0 0 0 11
00 37 0 0 0 0 8
00 38 0 0 0 0 11
00 39 0 0 0 0 8
00 40 0 0 0 0 13
00 41 0 0 0 0 8
00 42 0 0 0 0 7
00 43 0 0 0 0 5
00 44 0 0 0 0 10
00 45 0 0 0 0 14
00 46 0 0 0 0 3
00 47 0 0 0 0 8
00 48 0 0 0 0 7
00 49 0 0 0 0 7
00 50 0 0 0 0 5
00 51 0 0 0 0 8
00 52 0 0 0 0 11
00 53 0 0 0 0 7
00 54 0 0 0 0 8
00 55 0 0 0 0 10
00 56 0 0 0 0 11
00 57 0 0 0 0 6
00 58 0 0 0 0 11
00 59 0 0 0 0 4
00 60 0 0 0 0 8
00 61 0 0 0 0 5
00 62 1 0 0 0 10
00 63 0 0 0 0 9
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 8
01 03 0 0 0 0 7
01 04 0 0 0 0 10
01 05 0 0 0 0 0
01 06 0 0 0 0 10
01 07 0 0 0 0 15
01 08 0 0 0 0 4
01 09 0 0 0 0 13
01 10 0 0 0 0 9
01 11 0 0 0 0 4
01 12 0 0 0 0 12
01 13 0 0 0 0 11
01 14 0 0 0 0 7
01 15 0 0 0 0 2
01 16 0 0 0 0 7
01 17 0 0 0 0 12
01 18 0 0 0 0 6
01 19 0 0 0 0 10
01 20 0 0 0 0 9
01 21 0 0 0 0 13
01 22 0 0 0 0 6
01 23 0 0 0 0 12
01 24 0 0 0 0 5
01 25 0 0 0 0 10
01 26 0 0 0 0 9
01 27 0 0 0 0 9
01 28 0 0 0 0 5
01 29 0 0 0 0 4
01 30 0 0 0 0 9
01 31 0 0 0 0 6
01 32 0 0 0 0 10
01 33 0 0 0 0 5
01 34 1 0 0 0 15
01 35 0 0 0 0 8
01 36 0 0 0 0 4
01 37 0 0 0 0 7
01 38 0 0 0 0 12
01 39 0 0 0 0 8
01 40 0 0 0 0 9
01 41 0 0 0 0 4
01 42 0 0 0 0 12
01 43 0 0 0 0 6
01 44 0 0 0 0 6
01 45 0 0 0 0 13
01 46 0 0 0 0 12
01 47 0 0 0 0 8
01 48 0 0 0 0 4
01 49 0 0 0 0 10
01 50 0 0 0 0 10
01 51 0 0 0 0 8
01 52 0 0 0 0 10
01 53 0 0 0 0 11
01 54 0 0 0 0 11
01 55 0 0 0 0 4
01 56 0 0 0 0 13
01 57 0 0 0 0 12
01 58 0 0 0 0 4
01 59 0 0 0 0 5
01 60 0 0 0 0 9
01 61 0 0 0 0 7
01 62 0 0 0 0 7
01 63 0 0 0 0 10
02 00 0 0 0 0 6
02 01 0 0 0 0 11
02 02 0 0 0 0 14
02 03 0 0 0 0 8
02 04 0 0 0 0 11
02 05 0 0 0 0 14
02 06 0 0 0 0 11
02 07 0 0 0 0 12
02 08 0 0 0 0 7
02 09 0 0 0 0 10
02 10 0 0 0 0 6
02 11 0 0 0 0 7
02 12 0 0 0 0 9
02 13 0 0 0 0 5
02 14 0 0 0 0 8
02 15 0 0 0 0 6
02 16 0 0 0 0 10
02 17 0 0 0 0 10
02 18 0 0 0 0 10
02 19 0 0 0 0 8
02 20 0 0 0 0 9
02 21 0 0 0 0 7
02 22 0 0 0 0 4
02 23 0 0 0 0 7
02 24 0 0 0 0 12
02 25 0 0 0 0 2
02 26 0 0 0 0 2
02 27 0 0 0 0 9
02 28 0 0 0 0 7
02 29 0 0 0 0 8
02 30 0 0 0 0 9
02 31 0 0 0 0 11
02 32 0 0 0 0 7
02 33 0 0 0 0 9
02 34 0 0 0 0 6
02 35 1 0 0 0 10
02 36 0 0 0 0 10
02 37 0 0 0 0 14
02 38 0 0 0 0 7
02 39 0 0 0 0 7
02 40 0 0 0 0 7
02 41 0 0 0 0 9
02 42 0 0 0 0 6
02 43 0 0 0 0 9
02 44 0 0 0 0 4
02 45 0 0 0 0 10
02 46 0 0 0 0 12
02 47 0 0 0 0 8
02 48 0 0 0 0 5
02 49 0 0 0 0 12
02 50 0 0 0 0 5
02 51 0 0 0 0 9
02 52 0 0 0 0 6
02 53 0 0 0 0 5
02 54 0 0 0 0 6
02 55 0 0 0 0 8
02 56 0 0 0 0 4
02 57 0 0 0 0 7
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 8
02 61 0 0 0 0 9
02 62 0 0 0 0 12
02 63 0 0 0 0 8
03 00 0 0 0 0 8
03 01 0 0 0 0 11
03 02 0 0 0 0 5
03 03 0 0 0 0 2
03 04 0 0 0 0 6
03 05 0 0 0 0 9
03 06 0 0 0 0 6
03 07 0 0 0 0 7
03 08 0 0 0 0 8
03 09 0 0 0 0 8
03 10 0 0 0 0 6
03 11 0 0 0 0 5
03 12 0 0 0 0 12
03 13 0 0 0 0 3
03 14 0 0 0 0 9
03 15 0 0 0 0 1
03 16 0 0 0 0 6
03 17 0 0 0 0 13
03 18 0 0 0 0 15
03 19 0 0 0 0 8
03 20 0 0 0 0 8
03 21 0 0 0 0 6
03 22 0 0 0 0 7
03 23 0 0 0 0 8
03 24 0 0 0 0 4
03 25 0 0 0 0 5
03 26 0 0 0 0 6
03 27 0 0 0 0 5
03 28 0 0 0 0 11
03 29 0 0 0 0 9
03 30 0 0 0 0 6
03 31 0 0 0 0 12
03 32 0 0 0 0 6
03 33 0 0 0 0 6
03 34 0 0 0 0 9
03 35 0 0 0 0 6
03 36 0 0 0 0 10
03 37 0 0 0 0 11
03 38 0 0 0 0 10
03 39 0 0 0 0 10
03 40 0 0 0 0 4
03 41 0 0 0 0 8
03 42 0 0 0 0 12
03 43 0 0 0 0 12
03 44 0 0 0 0 9
03 45 0 0 0 0 12
03 46 0 0 0 0 9
03 47 0 0 0 0 3
03 48 0 0 0 0 9
03 49 0 0 0 0 7
03 50 0 0 0 0 1
03 51 0 0 0 0 8
03 52 0 0 0 0 9
03 53 0 0 0 0 10
03 54 0 0 0 0 4
03 55 0 0 0 0 3
03 56 0 0 0 0 12
03 57 0 0 0 0 5
03 58 0 0 0 0 4
03 59 0 0 0 0 7
03 60 1 0 0 0 8
03 61 0 0 0 0 8
03 62 0 0 0 0 8
03 63 0 0 0 0 1
04 00 0 0 0 0 8
04 01 0 0 0 0 15
04 02 0 0 0 0 12
04 03 0 0 0 0 4
04 04 0 0 0 0 9
04 05 0 0 0 0 11
04 06 0 0 0 0 14
04 07 0 0 0 0 10
04 08 0 0 0 0 4
04 09 0 0 0 0 7
04 10 0 0 0 0 8
04 11 0 0 0 0 11
04 12 0 0 0 0 9
04 13 0 0 0 0 11
04 14 0 0 0 0 7
04 15 0 0 0 0 10
04 16 0 0 0 0 3
04 17 0 0 0 0 10
04 18 0 0 0 0 11
04 19 0 0 0 0 12
04 20 0 0 0 0 10
04 21 0 0 0 0 11
04 22 0 0 0 0 8
04 23 0 0 0 0 11
04 24 0 0 0 0 2
04 25 0 0 0 0 3
04 26 0 0 0 0 9
04 27 0 0 0 0 11
04 28 0 0 0 0 7
04 29 0 0 0 0 4
04 30 0 0 0 0 5
04 31 0 0 0 0 9
04 32 0 0 0 0 4
04 33 0 0 0 0 8
04 34 0 0 0 0 7
04 35 0 0 0 0 3
04 36 0 0 0 0 4
04 37 0 0 0 0 10
... 3802 more lines ...
|
| Attachment 3: mpw4.conf
|
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",".
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"
[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200
## HDMI CONFIGURATION
# 4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
# Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
# Enable/Disable clock on differential LEMO
LEMOclk = 0
## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0
## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2
in0_STR = 0 # 0
in0_DEL = 0 # 18
in1_STR = 0 # 0
in1_DEL = 0 # 18
in2_STR = 0 # 0
in2_DEL = 0 # 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00
## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12
## DUT CONFIGURATION
# DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0x6
# DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x30 #0x00
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben
# Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1
# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)
## DATA COLLECTOR
EUDAQ_DC= tlu_dc
## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1
[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing
[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[Producer.RD50_MPW4_0]
[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1
[Monitor.mpw4_mon]
ENABLE_PRINT = 0
ENABLE_STD_PRINT = 0
ENABLE_STD_CONVERTER = 1
FORWARD2GUI = 1
[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
|
|
49
|
Sat Mar 30 15:22:15 2024 |
hh, mb, ps | 1st tests | 1032 | TJ-Monopix2 | 800 MeV | Low Flux Low | Proton | Unknown | 30.03.2024 15:24:02 | 30.03.2024 15:24:41 | 0 | HV | | |
automatic log for run 1032
Comment: |
| Attachment 1: tjmonopix2.conf
|
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",".
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"
[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200
## HDMI CONFIGURATION
# 4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
# Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 0
HDMI2_clk = 1
HDMI3_clk = 0
HDMI4_clk = 0
# Enable/Disable clock on differential LEMO
LEMOclk = 0
## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0
## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2
in0_STR = 0 # 0
in0_DEL = 0 # 18
in1_STR = 0 # 0
in1_DEL = 0 # 18
in2_STR = 0 # 0
in2_DEL = 0 # 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00
## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12
## DUT CONFIGURATION
# DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xC
# DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x00 #0x00
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben
# Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x3 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1
# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)
## DATA COLLECTOR
EUDAQ_DC= tlu_dc
## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1
[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing
[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[Producer.tjmonopix2_AB]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_AB
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1
START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1
[DataCollector.dc_tjmonopix2_AB]
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X
DISABLE_PRINT = 1
[Producer.tjmonopix2_CD]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_CD
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1
START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1
[DataCollector.dc_tjmonopix2_CD]
EUDAQ_MN = monopix2_mon
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X
DISABLE_PRINT = 1
[Producer.elog1]
#start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
#files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
|
|
56
|
Sat Mar 30 16:09:54 2024 |
hh, mb, ps | 1st tests | 1039 | TJ-Monopix2 | 800 MeV | Low Flux Low | Proton | Unknown | 30.03.2024 16:11:32 | 30.03.2024 16:12:21 | 0 | HV | | |
automatic log for run 1039
Comment: |
| Attachment 1: tjmonopix2.conf
|
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",".
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"
[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200
## HDMI CONFIGURATION
# 4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
# Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 0
HDMI2_clk = 1
HDMI3_clk = 0
HDMI4_clk = 0
# Enable/Disable clock on differential LEMO
LEMOclk = 0
## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0
## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2
in0_STR = 0 # 0
in0_DEL = 0 # 18
in1_STR = 0 # 0
in1_DEL = 0 # 18
in2_STR = 0 # 0
in2_DEL = 0 # 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00
## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12
## DUT CONFIGURATION
# DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xC
# DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x00 #0x00
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben
# Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x3 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1
# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)
## DATA COLLECTOR
EUDAQ_DC= tlu_dc
## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1
[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing
[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[Producer.tjmonopix2_AB]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_AB
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1
START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1
[DataCollector.dc_tjmonopix2_AB]
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X
DISABLE_PRINT = 1
[Producer.tjmonopix2_CD]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_CD
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1
START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1
[DataCollector.dc_tjmonopix2_CD]
EUDAQ_MN = monopix2_mon
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X
DISABLE_PRINT = 1
[Producer.elog1]
#start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
#files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
|