Home CMS Production Clean room MedAustron HEPHY testbeams old
testbeam-MA2018 testbeam-MA2019 testbeam-MA2020 testbeam-MA2021 testbeam-MA2023 testbeam-MA2024
  Testbeams at MedAustron in 2024, Page 5 of 11  Not logged in ELOG logo
 Find |  Login |  Help 
 Full | Summary | Threaded | Hide attachments  Show only new entries    217 Entries 
Goto page Previous  1, 2, 3, 4, 5, 6 ... 9, 10, 11   Next  All
ID Date Author Subject Run Number DUT Beam Energy Rate Setting Particle Type Data t-Start t-Stop Duration_min Frontend Phantomdown Phantom thickness
  33   Sat Mar 30 10:27:56 2024 bp, ci, hhRD50-MPW41019RD50-MPW4800 MeVLow Flux LowProtonCrap30.03.2024 10:28:2830.03.2024 10:30:221Normal  
automatic log for run 1019
Comment:
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 511
matrix_config = matrix_mpw4.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.92
th__i = 3
Attachment 2: matrix_mpw4.txt 
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} 

# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1 
00 00 0 0 0 0 13 
00 01 0 0 0 0 4 
00 02 0 0 0 0 9 
00 03 0 0 0 0 12 
00 04 0 0 0 0 7 
00 05 0 0 0 0 10 
00 06 0 0 0 0 8 
00 07 0 0 0 0 8 
00 08 0 0 0 0 8 
00 09 0 0 0 0 9 
00 10 0 0 0 0 10 
00 11 0 0 0 0 5 
00 12 0 0 0 0 14 
00 13 0 0 0 0 6 
00 14 0 0 0 0 7 
00 15 0 0 0 0 3 
00 16 0 0 0 0 5 
00 17 0 0 0 0 15 
00 18 0 0 0 0 12 
00 19 0 0 0 0 11 
00 20 0 0 0 0 6 
00 21 0 0 0 0 5 
00 22 0 0 0 0 7 
00 23 0 0 0 0 6 
00 24 0 0 0 0 10 
00 25 0 0 0 0 4 
00 26 0 0 0 0 6 
00 27 0 0 0 0 0 
00 28 0 0 0 0 6 
00 29 0 0 0 0 6 
00 30 0 0 0 0 11 
00 31 0 0 0 0 3 
00 32 0 0 0 0 6 
00 33 0 0 0 0 8 
00 34 0 0 0 0 9 
00 35 0 0 0 0 8 
00 36 0 0 0 0 11 
00 37 0 0 0 0 8 
00 38 0 0 0 0 11 
00 39 0 0 0 0 8 
00 40 0 0 0 0 13 
00 41 0 0 0 0 8 
00 42 0 0 0 0 7 
00 43 0 0 0 0 5 
00 44 0 0 0 0 10 
00 45 0 0 0 0 14 
00 46 0 0 0 0 3 
00 47 0 0 0 0 8 
00 48 0 0 0 0 7 
00 49 0 0 0 0 7 
00 50 0 0 0 0 5 
00 51 0 0 0 0 8 
00 52 0 0 0 0 11 
00 53 0 0 0 0 7 
00 54 0 0 0 0 8 
00 55 0 0 0 0 10 
00 56 0 0 0 0 11 
00 57 0 0 0 0 6 
00 58 0 0 0 0 11 
00 59 0 0 0 0 4 
00 60 0 0 0 0 8 
00 61 0 0 0 0 5 
00 62 1 0 0 0 10 
00 63 0 0 0 0 9 
01 00 0 0 0 0 15 
01 01 0 0 0 0 10 
01 02 0 0 0 0 8 
01 03 0 0 0 0 7 
01 04 0 0 0 0 10 
01 05 0 0 0 0 0 
01 06 0 0 0 0 10 
01 07 0 0 0 0 15 
01 08 0 0 0 0 4 
01 09 0 0 0 0 13 
01 10 0 0 0 0 9 
01 11 0 0 0 0 4 
01 12 0 0 0 0 12 
01 13 0 0 0 0 11 
01 14 0 0 0 0 7 
01 15 0 0 0 0 2 
01 16 0 0 0 0 7 
01 17 0 0 0 0 12 
01 18 0 0 0 0 6 
01 19 0 0 0 0 10 
01 20 0 0 0 0 9 
01 21 0 0 0 0 13 
01 22 0 0 0 0 6 
01 23 0 0 0 0 12 
01 24 0 0 0 0 5 
01 25 0 0 0 0 10 
01 26 0 0 0 0 9 
01 27 0 0 0 0 9 
01 28 0 0 0 0 5 
01 29 0 0 0 0 4 
01 30 0 0 0 0 9 
01 31 0 0 0 0 6 
01 32 0 0 0 0 10 
01 33 0 0 0 0 5 
01 34 1 0 0 0 15 
01 35 0 0 0 0 8 
01 36 0 0 0 0 4 
01 37 0 0 0 0 7 
01 38 0 0 0 0 12 
01 39 0 0 0 0 8 
01 40 0 0 0 0 9 
01 41 0 0 0 0 4 
01 42 0 0 0 0 12 
01 43 0 0 0 0 6 
01 44 0 0 0 0 6 
01 45 0 0 0 0 13 
01 46 0 0 0 0 12 
01 47 0 0 0 0 8 
01 48 0 0 0 0 4 
01 49 0 0 0 0 10 
01 50 0 0 0 0 10 
01 51 0 0 0 0 8 
01 52 0 0 0 0 10 
01 53 0 0 0 0 11 
01 54 0 0 0 0 11 
01 55 0 0 0 0 4 
01 56 0 0 0 0 13 
01 57 0 0 0 0 12 
01 58 0 0 0 0 4 
01 59 0 0 0 0 5 
01 60 0 0 0 0 9 
01 61 0 0 0 0 7 
01 62 0 0 0 0 7 
01 63 0 0 0 0 10 
02 00 0 0 0 0 6 
02 01 0 0 0 0 11 
02 02 0 0 0 0 14 
02 03 0 0 0 0 8 
02 04 0 0 0 0 11 
02 05 0 0 0 0 14 
02 06 0 0 0 0 11 
02 07 0 0 0 0 12 
02 08 0 0 0 0 7 
02 09 0 0 0 0 10 
02 10 0 0 0 0 6 
02 11 0 0 0 0 7 
02 12 0 0 0 0 9 
02 13 0 0 0 0 5 
02 14 0 0 0 0 8 
02 15 0 0 0 0 6 
02 16 0 0 0 0 10 
02 17 0 0 0 0 10 
02 18 0 0 0 0 10 
02 19 0 0 0 0 8 
02 20 0 0 0 0 9 
02 21 0 0 0 0 7 
02 22 0 0 0 0 4 
02 23 0 0 0 0 7 
02 24 0 0 0 0 12 
02 25 0 0 0 0 2 
02 26 0 0 0 0 2 
02 27 0 0 0 0 9 
02 28 0 0 0 0 7 
02 29 0 0 0 0 8 
02 30 0 0 0 0 9 
02 31 0 0 0 0 11 
02 32 0 0 0 0 7 
02 33 0 0 0 0 9 
02 34 0 0 0 0 6 
02 35 1 0 0 0 10 
02 36 0 0 0 0 10 
02 37 0 0 0 0 14 
02 38 0 0 0 0 7 
02 39 0 0 0 0 7 
02 40 0 0 0 0 7 
02 41 0 0 0 0 9 
02 42 0 0 0 0 6 
02 43 0 0 0 0 9 
02 44 0 0 0 0 4 
02 45 0 0 0 0 10 
02 46 0 0 0 0 12 
02 47 0 0 0 0 8 
02 48 0 0 0 0 5 
02 49 0 0 0 0 12 
02 50 0 0 0 0 5 
02 51 0 0 0 0 9 
02 52 0 0 0 0 6 
02 53 0 0 0 0 5 
02 54 0 0 0 0 6 
02 55 0 0 0 0 8 
02 56 0 0 0 0 4 
02 57 0 0 0 0 7 
02 58 0 0 0 0 15 
02 59 0 0 0 0 15 
02 60 0 0 0 0 8 
02 61 0 0 0 0 9 
02 62 0 0 0 0 12 
02 63 0 0 0 0 8 
03 00 0 0 0 0 8 
03 01 0 0 0 0 11 
03 02 0 0 0 0 5 
03 03 0 0 0 0 2 
03 04 0 0 0 0 6 
03 05 0 0 0 0 9 
03 06 0 0 0 0 6 
03 07 0 0 0 0 7 
03 08 0 0 0 0 8 
03 09 0 0 0 0 8 
03 10 0 0 0 0 6 
03 11 0 0 0 0 5 
03 12 0 0 0 0 12 
03 13 0 0 0 0 3 
03 14 0 0 0 0 9 
03 15 0 0 0 0 1 
03 16 0 0 0 0 6 
03 17 0 0 0 0 13 
03 18 0 0 0 0 15 
03 19 0 0 0 0 8 
03 20 0 0 0 0 8 
03 21 0 0 0 0 6 
03 22 0 0 0 0 7 
03 23 0 0 0 0 8 
03 24 0 0 0 0 4 
03 25 0 0 0 0 5 
03 26 0 0 0 0 6 
03 27 0 0 0 0 5 
03 28 0 0 0 0 11 
03 29 0 0 0 0 9 
03 30 0 0 0 0 6 
03 31 0 0 0 0 12 
03 32 0 0 0 0 6 
03 33 0 0 0 0 6 
03 34 0 0 0 0 9 
03 35 0 0 0 0 6 
03 36 0 0 0 0 10 
03 37 0 0 0 0 11 
03 38 0 0 0 0 10 
03 39 0 0 0 0 10 
03 40 0 0 0 0 4 
03 41 0 0 0 0 8 
03 42 0 0 0 0 12 
03 43 0 0 0 0 12 
03 44 0 0 0 0 9 
03 45 0 0 0 0 12 
03 46 0 0 0 0 9 
03 47 0 0 0 0 3 
03 48 0 0 0 0 9 
03 49 0 0 0 0 7 
03 50 0 0 0 0 1 
03 51 0 0 0 0 8 
03 52 0 0 0 0 9 
03 53 0 0 0 0 10 
03 54 0 0 0 0 4 
03 55 0 0 0 0 3 
03 56 0 0 0 0 12 
03 57 0 0 0 0 5 
03 58 0 0 0 0 4 
03 59 0 0 0 0 7 
03 60 1 0 0 0 8 
03 61 0 0 0 0 8 
03 62 0 0 0 0 8 
03 63 0 0 0 0 1 
04 00 0 0 0 0 8 
04 01 0 0 0 0 15 
04 02 0 0 0 0 12 
04 03 0 0 0 0 4 
04 04 0 0 0 0 9 
04 05 0 0 0 0 11 
04 06 0 0 0 0 14 
04 07 0 0 0 0 10 
04 08 0 0 0 0 4 
04 09 0 0 0 0 7 
04 10 0 0 0 0 8 
04 11 0 0 0 0 11 
04 12 0 0 0 0 9 
04 13 0 0 0 0 11 
04 14 0 0 0 0 7 
04 15 0 0 0 0 10 
04 16 0 0 0 0 3 
04 17 0 0 0 0 10 
04 18 0 0 0 0 11 
04 19 0 0 0 0 12 
04 20 0 0 0 0 10 
04 21 0 0 0 0 11 
04 22 0 0 0 0 8 
04 23 0 0 0 0 11 
04 24 0 0 0 0 2 
04 25 0 0 0 0 3 
04 26 0 0 0 0 9 
04 27 0 0 0 0 11 
04 28 0 0 0 0 7 
04 29 0 0 0 0 4 
04 30 0 0 0 0 5 
04 31 0 0 0 0 9 
04 32 0 0 0 0 4 
04 33 0 0 0 0 8 
04 34 0 0 0 0 7 
04 35 0 0 0 0 3 
04 36 0 0 0 0 4 
04 37 0 0 0 0 10
... 3802 more lines ...
Attachment 3: mpw4.conf 
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". 
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"


[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001  #8 coinc1+2
in0_STR = 0	# 0 
in0_DEL = 0	# 18
in1_STR = 0	# 0
in1_DEL = 0	# 18
in2_STR = 0	# 0
in2_DEL = 0 	# 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0x6

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x30 #0x00

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1


# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc

## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1




[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing


[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1


[Producer.RD50_MPW4_0]

[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1

[Monitor.mpw4_mon]
ENABLE_PRINT = 0
ENABLE_STD_PRINT = 0
ENABLE_STD_CONVERTER = 1
FORWARD2GUI = 1

[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
  34   Sat Mar 30 10:28:42 2024 bp, ci, hhRD50-MPW4 RD50-MPW4800 MeVLow Flux LowProtonGood   Normal  
tracker FADC down, HV not on earlier, restart happening
  35   Sat Mar 30 10:34:27 2024 bp, ci, hhRD50-MPW41020RD50-MPW4800 MeVLow Flux LowProtonGood30.03.2024 10:33:0130.03.2024 10:36:533Normal  
automatic log for run 1020
Comment:
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 511
matrix_config = matrix_mpw4.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.92
th__i = 3
Attachment 2: matrix_mpw4.txt 
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} 

# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1 
00 00 0 0 0 0 13 
00 01 0 0 0 0 4 
00 02 0 0 0 0 9 
00 03 0 0 0 0 12 
00 04 0 0 0 0 7 
00 05 0 0 0 0 10 
00 06 0 0 0 0 8 
00 07 0 0 0 0 8 
00 08 0 0 0 0 8 
00 09 0 0 0 0 9 
00 10 0 0 0 0 10 
00 11 0 0 0 0 5 
00 12 0 0 0 0 14 
00 13 0 0 0 0 6 
00 14 0 0 0 0 7 
00 15 0 0 0 0 3 
00 16 0 0 0 0 5 
00 17 0 0 0 0 15 
00 18 0 0 0 0 12 
00 19 0 0 0 0 11 
00 20 0 0 0 0 6 
00 21 0 0 0 0 5 
00 22 0 0 0 0 7 
00 23 0 0 0 0 6 
00 24 0 0 0 0 10 
00 25 0 0 0 0 4 
00 26 0 0 0 0 6 
00 27 0 0 0 0 0 
00 28 0 0 0 0 6 
00 29 0 0 0 0 6 
00 30 0 0 0 0 11 
00 31 0 0 0 0 3 
00 32 0 0 0 0 6 
00 33 0 0 0 0 8 
00 34 0 0 0 0 9 
00 35 0 0 0 0 8 
00 36 0 0 0 0 11 
00 37 0 0 0 0 8 
00 38 0 0 0 0 11 
00 39 0 0 0 0 8 
00 40 0 0 0 0 13 
00 41 0 0 0 0 8 
00 42 0 0 0 0 7 
00 43 0 0 0 0 5 
00 44 0 0 0 0 10 
00 45 0 0 0 0 14 
00 46 0 0 0 0 3 
00 47 0 0 0 0 8 
00 48 0 0 0 0 7 
00 49 0 0 0 0 7 
00 50 0 0 0 0 5 
00 51 0 0 0 0 8 
00 52 0 0 0 0 11 
00 53 0 0 0 0 7 
00 54 0 0 0 0 8 
00 55 0 0 0 0 10 
00 56 0 0 0 0 11 
00 57 0 0 0 0 6 
00 58 0 0 0 0 11 
00 59 0 0 0 0 4 
00 60 0 0 0 0 8 
00 61 0 0 0 0 5 
00 62 1 0 0 0 10 
00 63 0 0 0 0 9 
01 00 0 0 0 0 15 
01 01 0 0 0 0 10 
01 02 0 0 0 0 8 
01 03 0 0 0 0 7 
01 04 0 0 0 0 10 
01 05 0 0 0 0 0 
01 06 0 0 0 0 10 
01 07 0 0 0 0 15 
01 08 0 0 0 0 4 
01 09 0 0 0 0 13 
01 10 0 0 0 0 9 
01 11 0 0 0 0 4 
01 12 0 0 0 0 12 
01 13 0 0 0 0 11 
01 14 0 0 0 0 7 
01 15 0 0 0 0 2 
01 16 0 0 0 0 7 
01 17 0 0 0 0 12 
01 18 0 0 0 0 6 
01 19 0 0 0 0 10 
01 20 0 0 0 0 9 
01 21 0 0 0 0 13 
01 22 0 0 0 0 6 
01 23 0 0 0 0 12 
01 24 0 0 0 0 5 
01 25 0 0 0 0 10 
01 26 0 0 0 0 9 
01 27 0 0 0 0 9 
01 28 0 0 0 0 5 
01 29 0 0 0 0 4 
01 30 0 0 0 0 9 
01 31 0 0 0 0 6 
01 32 0 0 0 0 10 
01 33 0 0 0 0 5 
01 34 1 0 0 0 15 
01 35 0 0 0 0 8 
01 36 0 0 0 0 4 
01 37 0 0 0 0 7 
01 38 0 0 0 0 12 
01 39 0 0 0 0 8 
01 40 0 0 0 0 9 
01 41 0 0 0 0 4 
01 42 0 0 0 0 12 
01 43 0 0 0 0 6 
01 44 0 0 0 0 6 
01 45 0 0 0 0 13 
01 46 0 0 0 0 12 
01 47 0 0 0 0 8 
01 48 0 0 0 0 4 
01 49 0 0 0 0 10 
01 50 0 0 0 0 10 
01 51 0 0 0 0 8 
01 52 0 0 0 0 10 
01 53 0 0 0 0 11 
01 54 0 0 0 0 11 
01 55 0 0 0 0 4 
01 56 0 0 0 0 13 
01 57 0 0 0 0 12 
01 58 0 0 0 0 4 
01 59 0 0 0 0 5 
01 60 0 0 0 0 9 
01 61 0 0 0 0 7 
01 62 0 0 0 0 7 
01 63 0 0 0 0 10 
02 00 0 0 0 0 6 
02 01 0 0 0 0 11 
02 02 0 0 0 0 14 
02 03 0 0 0 0 8 
02 04 0 0 0 0 11 
02 05 0 0 0 0 14 
02 06 0 0 0 0 11 
02 07 0 0 0 0 12 
02 08 0 0 0 0 7 
02 09 0 0 0 0 10 
02 10 0 0 0 0 6 
02 11 0 0 0 0 7 
02 12 0 0 0 0 9 
02 13 0 0 0 0 5 
02 14 0 0 0 0 8 
02 15 0 0 0 0 6 
02 16 0 0 0 0 10 
02 17 0 0 0 0 10 
02 18 0 0 0 0 10 
02 19 0 0 0 0 8 
02 20 0 0 0 0 9 
02 21 0 0 0 0 7 
02 22 0 0 0 0 4 
02 23 0 0 0 0 7 
02 24 0 0 0 0 12 
02 25 0 0 0 0 2 
02 26 0 0 0 0 2 
02 27 0 0 0 0 9 
02 28 0 0 0 0 7 
02 29 0 0 0 0 8 
02 30 0 0 0 0 9 
02 31 0 0 0 0 11 
02 32 0 0 0 0 7 
02 33 0 0 0 0 9 
02 34 0 0 0 0 6 
02 35 1 0 0 0 10 
02 36 0 0 0 0 10 
02 37 0 0 0 0 14 
02 38 0 0 0 0 7 
02 39 0 0 0 0 7 
02 40 0 0 0 0 7 
02 41 0 0 0 0 9 
02 42 0 0 0 0 6 
02 43 0 0 0 0 9 
02 44 0 0 0 0 4 
02 45 0 0 0 0 10 
02 46 0 0 0 0 12 
02 47 0 0 0 0 8 
02 48 0 0 0 0 5 
02 49 0 0 0 0 12 
02 50 0 0 0 0 5 
02 51 0 0 0 0 9 
02 52 0 0 0 0 6 
02 53 0 0 0 0 5 
02 54 0 0 0 0 6 
02 55 0 0 0 0 8 
02 56 0 0 0 0 4 
02 57 0 0 0 0 7 
02 58 0 0 0 0 15 
02 59 0 0 0 0 15 
02 60 0 0 0 0 8 
02 61 0 0 0 0 9 
02 62 0 0 0 0 12 
02 63 0 0 0 0 8 
03 00 0 0 0 0 8 
03 01 0 0 0 0 11 
03 02 0 0 0 0 5 
03 03 0 0 0 0 2 
03 04 0 0 0 0 6 
03 05 0 0 0 0 9 
03 06 0 0 0 0 6 
03 07 0 0 0 0 7 
03 08 0 0 0 0 8 
03 09 0 0 0 0 8 
03 10 0 0 0 0 6 
03 11 0 0 0 0 5 
03 12 0 0 0 0 12 
03 13 0 0 0 0 3 
03 14 0 0 0 0 9 
03 15 0 0 0 0 1 
03 16 0 0 0 0 6 
03 17 0 0 0 0 13 
03 18 0 0 0 0 15 
03 19 0 0 0 0 8 
03 20 0 0 0 0 8 
03 21 0 0 0 0 6 
03 22 0 0 0 0 7 
03 23 0 0 0 0 8 
03 24 0 0 0 0 4 
03 25 0 0 0 0 5 
03 26 0 0 0 0 6 
03 27 0 0 0 0 5 
03 28 0 0 0 0 11 
03 29 0 0 0 0 9 
03 30 0 0 0 0 6 
03 31 0 0 0 0 12 
03 32 0 0 0 0 6 
03 33 0 0 0 0 6 
03 34 0 0 0 0 9 
03 35 0 0 0 0 6 
03 36 0 0 0 0 10 
03 37 0 0 0 0 11 
03 38 0 0 0 0 10 
03 39 0 0 0 0 10 
03 40 0 0 0 0 4 
03 41 0 0 0 0 8 
03 42 0 0 0 0 12 
03 43 0 0 0 0 12 
03 44 0 0 0 0 9 
03 45 0 0 0 0 12 
03 46 0 0 0 0 9 
03 47 0 0 0 0 3 
03 48 0 0 0 0 9 
03 49 0 0 0 0 7 
03 50 0 0 0 0 1 
03 51 0 0 0 0 8 
03 52 0 0 0 0 9 
03 53 0 0 0 0 10 
03 54 0 0 0 0 4 
03 55 0 0 0 0 3 
03 56 0 0 0 0 12 
03 57 0 0 0 0 5 
03 58 0 0 0 0 4 
03 59 0 0 0 0 7 
03 60 1 0 0 0 8 
03 61 0 0 0 0 8 
03 62 0 0 0 0 8 
03 63 0 0 0 0 1 
04 00 0 0 0 0 8 
04 01 0 0 0 0 15 
04 02 0 0 0 0 12 
04 03 0 0 0 0 4 
04 04 0 0 0 0 9 
04 05 0 0 0 0 11 
04 06 0 0 0 0 14 
04 07 0 0 0 0 10 
04 08 0 0 0 0 4 
04 09 0 0 0 0 7 
04 10 0 0 0 0 8 
04 11 0 0 0 0 11 
04 12 0 0 0 0 9 
04 13 0 0 0 0 11 
04 14 0 0 0 0 7 
04 15 0 0 0 0 10 
04 16 0 0 0 0 3 
04 17 0 0 0 0 10 
04 18 0 0 0 0 11 
04 19 0 0 0 0 12 
04 20 0 0 0 0 10 
04 21 0 0 0 0 11 
04 22 0 0 0 0 8 
04 23 0 0 0 0 11 
04 24 0 0 0 0 2 
04 25 0 0 0 0 3 
04 26 0 0 0 0 9 
04 27 0 0 0 0 11 
04 28 0 0 0 0 7 
04 29 0 0 0 0 4 
04 30 0 0 0 0 5 
04 31 0 0 0 0 9 
04 32 0 0 0 0 4 
04 33 0 0 0 0 8 
04 34 0 0 0 0 7 
04 35 0 0 0 0 3 
04 36 0 0 0 0 4 
04 37 0 0 0 0 10
... 3802 more lines ...
Attachment 3: mpw4.conf 
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". 
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"


[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001  #8 coinc1+2
in0_STR = 0	# 0 
in0_DEL = 0	# 18
in1_STR = 0	# 0
in1_DEL = 0	# 18
in2_STR = 0	# 0
in2_DEL = 0 	# 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0x6

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x30 #0x00

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1


# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc

## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1




[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing


[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1


[Producer.RD50_MPW4_0]

[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1

[Monitor.mpw4_mon]
ENABLE_PRINT = 0
ENABLE_STD_PRINT = 0
ENABLE_STD_CONVERTER = 1
FORWARD2GUI = 1

[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
  36   Sat Mar 30 10:39:45 2024 bp, ci, hhRD50-MPW41021RD50-MPW4800 MeVLow Flux LowProtonGood30.03.2024 10:37:0130.03.2024 10:42:125Normal  
automatic log for run 1021
Comment:
no tracker at start of run
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 511
matrix_config = matrix_mpw4.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.92
th__i = 3
Attachment 2: matrix_mpw4.txt 
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} 

# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1 
00 00 0 0 0 0 13 
00 01 0 0 0 0 4 
00 02 0 0 0 0 9 
00 03 0 0 0 0 12 
00 04 0 0 0 0 7 
00 05 0 0 0 0 10 
00 06 0 0 0 0 8 
00 07 0 0 0 0 8 
00 08 0 0 0 0 8 
00 09 0 0 0 0 9 
00 10 0 0 0 0 10 
00 11 0 0 0 0 5 
00 12 0 0 0 0 14 
00 13 0 0 0 0 6 
00 14 0 0 0 0 7 
00 15 0 0 0 0 3 
00 16 0 0 0 0 5 
00 17 0 0 0 0 15 
00 18 0 0 0 0 12 
00 19 0 0 0 0 11 
00 20 0 0 0 0 6 
00 21 0 0 0 0 5 
00 22 0 0 0 0 7 
00 23 0 0 0 0 6 
00 24 0 0 0 0 10 
00 25 0 0 0 0 4 
00 26 0 0 0 0 6 
00 27 0 0 0 0 0 
00 28 0 0 0 0 6 
00 29 0 0 0 0 6 
00 30 0 0 0 0 11 
00 31 0 0 0 0 3 
00 32 0 0 0 0 6 
00 33 0 0 0 0 8 
00 34 0 0 0 0 9 
00 35 0 0 0 0 8 
00 36 0 0 0 0 11 
00 37 0 0 0 0 8 
00 38 0 0 0 0 11 
00 39 0 0 0 0 8 
00 40 0 0 0 0 13 
00 41 0 0 0 0 8 
00 42 0 0 0 0 7 
00 43 0 0 0 0 5 
00 44 0 0 0 0 10 
00 45 0 0 0 0 14 
00 46 0 0 0 0 3 
00 47 0 0 0 0 8 
00 48 0 0 0 0 7 
00 49 0 0 0 0 7 
00 50 0 0 0 0 5 
00 51 0 0 0 0 8 
00 52 0 0 0 0 11 
00 53 0 0 0 0 7 
00 54 0 0 0 0 8 
00 55 0 0 0 0 10 
00 56 0 0 0 0 11 
00 57 0 0 0 0 6 
00 58 0 0 0 0 11 
00 59 0 0 0 0 4 
00 60 0 0 0 0 8 
00 61 0 0 0 0 5 
00 62 1 0 0 0 10 
00 63 0 0 0 0 9 
01 00 0 0 0 0 15 
01 01 0 0 0 0 10 
01 02 0 0 0 0 8 
01 03 0 0 0 0 7 
01 04 0 0 0 0 10 
01 05 0 0 0 0 0 
01 06 0 0 0 0 10 
01 07 0 0 0 0 15 
01 08 0 0 0 0 4 
01 09 0 0 0 0 13 
01 10 0 0 0 0 9 
01 11 0 0 0 0 4 
01 12 0 0 0 0 12 
01 13 0 0 0 0 11 
01 14 0 0 0 0 7 
01 15 0 0 0 0 2 
01 16 0 0 0 0 7 
01 17 0 0 0 0 12 
01 18 0 0 0 0 6 
01 19 0 0 0 0 10 
01 20 0 0 0 0 9 
01 21 0 0 0 0 13 
01 22 0 0 0 0 6 
01 23 0 0 0 0 12 
01 24 0 0 0 0 5 
01 25 0 0 0 0 10 
01 26 0 0 0 0 9 
01 27 0 0 0 0 9 
01 28 0 0 0 0 5 
01 29 0 0 0 0 4 
01 30 0 0 0 0 9 
01 31 0 0 0 0 6 
01 32 0 0 0 0 10 
01 33 0 0 0 0 5 
01 34 1 0 0 0 15 
01 35 0 0 0 0 8 
01 36 0 0 0 0 4 
01 37 0 0 0 0 7 
01 38 0 0 0 0 12 
01 39 0 0 0 0 8 
01 40 0 0 0 0 9 
01 41 0 0 0 0 4 
01 42 0 0 0 0 12 
01 43 0 0 0 0 6 
01 44 0 0 0 0 6 
01 45 0 0 0 0 13 
01 46 0 0 0 0 12 
01 47 0 0 0 0 8 
01 48 0 0 0 0 4 
01 49 0 0 0 0 10 
01 50 0 0 0 0 10 
01 51 0 0 0 0 8 
01 52 0 0 0 0 10 
01 53 0 0 0 0 11 
01 54 0 0 0 0 11 
01 55 0 0 0 0 4 
01 56 0 0 0 0 13 
01 57 0 0 0 0 12 
01 58 0 0 0 0 4 
01 59 0 0 0 0 5 
01 60 0 0 0 0 9 
01 61 0 0 0 0 7 
01 62 0 0 0 0 7 
01 63 0 0 0 0 10 
02 00 0 0 0 0 6 
02 01 0 0 0 0 11 
02 02 0 0 0 0 14 
02 03 0 0 0 0 8 
02 04 0 0 0 0 11 
02 05 0 0 0 0 14 
02 06 0 0 0 0 11 
02 07 0 0 0 0 12 
02 08 0 0 0 0 7 
02 09 0 0 0 0 10 
02 10 0 0 0 0 6 
02 11 0 0 0 0 7 
02 12 0 0 0 0 9 
02 13 0 0 0 0 5 
02 14 0 0 0 0 8 
02 15 0 0 0 0 6 
02 16 0 0 0 0 10 
02 17 0 0 0 0 10 
02 18 0 0 0 0 10 
02 19 0 0 0 0 8 
02 20 0 0 0 0 9 
02 21 0 0 0 0 7 
02 22 0 0 0 0 4 
02 23 0 0 0 0 7 
02 24 0 0 0 0 12 
02 25 0 0 0 0 2 
02 26 0 0 0 0 2 
02 27 0 0 0 0 9 
02 28 0 0 0 0 7 
02 29 0 0 0 0 8 
02 30 0 0 0 0 9 
02 31 0 0 0 0 11 
02 32 0 0 0 0 7 
02 33 0 0 0 0 9 
02 34 0 0 0 0 6 
02 35 1 0 0 0 10 
02 36 0 0 0 0 10 
02 37 0 0 0 0 14 
02 38 0 0 0 0 7 
02 39 0 0 0 0 7 
02 40 0 0 0 0 7 
02 41 0 0 0 0 9 
02 42 0 0 0 0 6 
02 43 0 0 0 0 9 
02 44 0 0 0 0 4 
02 45 0 0 0 0 10 
02 46 0 0 0 0 12 
02 47 0 0 0 0 8 
02 48 0 0 0 0 5 
02 49 0 0 0 0 12 
02 50 0 0 0 0 5 
02 51 0 0 0 0 9 
02 52 0 0 0 0 6 
02 53 0 0 0 0 5 
02 54 0 0 0 0 6 
02 55 0 0 0 0 8 
02 56 0 0 0 0 4 
02 57 0 0 0 0 7 
02 58 0 0 0 0 15 
02 59 0 0 0 0 15 
02 60 0 0 0 0 8 
02 61 0 0 0 0 9 
02 62 0 0 0 0 12 
02 63 0 0 0 0 8 
03 00 0 0 0 0 8 
03 01 0 0 0 0 11 
03 02 0 0 0 0 5 
03 03 0 0 0 0 2 
03 04 0 0 0 0 6 
03 05 0 0 0 0 9 
03 06 0 0 0 0 6 
03 07 0 0 0 0 7 
03 08 0 0 0 0 8 
03 09 0 0 0 0 8 
03 10 0 0 0 0 6 
03 11 0 0 0 0 5 
03 12 0 0 0 0 12 
03 13 0 0 0 0 3 
03 14 0 0 0 0 9 
03 15 0 0 0 0 1 
03 16 0 0 0 0 6 
03 17 0 0 0 0 13 
03 18 0 0 0 0 15 
03 19 0 0 0 0 8 
03 20 0 0 0 0 8 
03 21 0 0 0 0 6 
03 22 0 0 0 0 7 
03 23 0 0 0 0 8 
03 24 0 0 0 0 4 
03 25 0 0 0 0 5 
03 26 0 0 0 0 6 
03 27 0 0 0 0 5 
03 28 0 0 0 0 11 
03 29 0 0 0 0 9 
03 30 0 0 0 0 6 
03 31 0 0 0 0 12 
03 32 0 0 0 0 6 
03 33 0 0 0 0 6 
03 34 0 0 0 0 9 
03 35 0 0 0 0 6 
03 36 0 0 0 0 10 
03 37 0 0 0 0 11 
03 38 0 0 0 0 10 
03 39 0 0 0 0 10 
03 40 0 0 0 0 4 
03 41 0 0 0 0 8 
03 42 0 0 0 0 12 
03 43 0 0 0 0 12 
03 44 0 0 0 0 9 
03 45 0 0 0 0 12 
03 46 0 0 0 0 9 
03 47 0 0 0 0 3 
03 48 0 0 0 0 9 
03 49 0 0 0 0 7 
03 50 0 0 0 0 1 
03 51 0 0 0 0 8 
03 52 0 0 0 0 9 
03 53 0 0 0 0 10 
03 54 0 0 0 0 4 
03 55 0 0 0 0 3 
03 56 0 0 0 0 12 
03 57 0 0 0 0 5 
03 58 0 0 0 0 4 
03 59 0 0 0 0 7 
03 60 1 0 0 0 8 
03 61 0 0 0 0 8 
03 62 0 0 0 0 8 
03 63 0 0 0 0 1 
04 00 0 0 0 0 8 
04 01 0 0 0 0 15 
04 02 0 0 0 0 12 
04 03 0 0 0 0 4 
04 04 0 0 0 0 9 
04 05 0 0 0 0 11 
04 06 0 0 0 0 14 
04 07 0 0 0 0 10 
04 08 0 0 0 0 4 
04 09 0 0 0 0 7 
04 10 0 0 0 0 8 
04 11 0 0 0 0 11 
04 12 0 0 0 0 9 
04 13 0 0 0 0 11 
04 14 0 0 0 0 7 
04 15 0 0 0 0 10 
04 16 0 0 0 0 3 
04 17 0 0 0 0 10 
04 18 0 0 0 0 11 
04 19 0 0 0 0 12 
04 20 0 0 0 0 10 
04 21 0 0 0 0 11 
04 22 0 0 0 0 8 
04 23 0 0 0 0 11 
04 24 0 0 0 0 2 
04 25 0 0 0 0 3 
04 26 0 0 0 0 9 
04 27 0 0 0 0 11 
04 28 0 0 0 0 7 
04 29 0 0 0 0 4 
04 30 0 0 0 0 5 
04 31 0 0 0 0 9 
04 32 0 0 0 0 4 
04 33 0 0 0 0 8 
04 34 0 0 0 0 7 
04 35 0 0 0 0 3 
04 36 0 0 0 0 4 
04 37 0 0 0 0 10
... 3802 more lines ...
Attachment 3: mpw4.conf 
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". 
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"


[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001  #8 coinc1+2
in0_STR = 0	# 0 
in0_DEL = 0	# 18
in1_STR = 0	# 0
in1_DEL = 0	# 18
in2_STR = 0	# 0
in2_DEL = 0 	# 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0x6

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x30 #0x00

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1


# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc

## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1




[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing


[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1


[Producer.RD50_MPW4_0]

[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1

[Monitor.mpw4_mon]
ENABLE_PRINT = 0
ENABLE_STD_PRINT = 0
ENABLE_STD_CONVERTER = 1
FORWARD2GUI = 1

[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
  37   Sat Mar 30 11:04:10 2024 bp, ci, hhRD50-MPW41022RD50-MPW4800 MeVLow Flux LowProtonGood30.03.2024 11:03:0530.03.2024 11:06:373Normal  
automatic log for run 1022
Comment:
changed alignment again
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 511
matrix_config = matrix_mpw4.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.92
th__i = 3
Attachment 2: matrix_mpw4.txt 
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} 

# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1 
00 00 0 0 0 0 13 
00 01 0 0 0 0 4 
00 02 0 0 0 0 9 
00 03 0 0 0 0 12 
00 04 0 0 0 0 7 
00 05 0 0 0 0 10 
00 06 0 0 0 0 8 
00 07 0 0 0 0 8 
00 08 0 0 0 0 8 
00 09 0 0 0 0 9 
00 10 0 0 0 0 10 
00 11 0 0 0 0 5 
00 12 0 0 0 0 14 
00 13 0 0 0 0 6 
00 14 0 0 0 0 7 
00 15 0 0 0 0 3 
00 16 0 0 0 0 5 
00 17 0 0 0 0 15 
00 18 0 0 0 0 12 
00 19 0 0 0 0 11 
00 20 0 0 0 0 6 
00 21 0 0 0 0 5 
00 22 0 0 0 0 7 
00 23 0 0 0 0 6 
00 24 0 0 0 0 10 
00 25 0 0 0 0 4 
00 26 0 0 0 0 6 
00 27 0 0 0 0 0 
00 28 0 0 0 0 6 
00 29 0 0 0 0 6 
00 30 0 0 0 0 11 
00 31 0 0 0 0 3 
00 32 0 0 0 0 6 
00 33 0 0 0 0 8 
00 34 0 0 0 0 9 
00 35 0 0 0 0 8 
00 36 0 0 0 0 11 
00 37 0 0 0 0 8 
00 38 0 0 0 0 11 
00 39 0 0 0 0 8 
00 40 0 0 0 0 13 
00 41 0 0 0 0 8 
00 42 0 0 0 0 7 
00 43 0 0 0 0 5 
00 44 0 0 0 0 10 
00 45 0 0 0 0 14 
00 46 0 0 0 0 3 
00 47 0 0 0 0 8 
00 48 0 0 0 0 7 
00 49 0 0 0 0 7 
00 50 0 0 0 0 5 
00 51 0 0 0 0 8 
00 52 0 0 0 0 11 
00 53 0 0 0 0 7 
00 54 0 0 0 0 8 
00 55 0 0 0 0 10 
00 56 0 0 0 0 11 
00 57 0 0 0 0 6 
00 58 0 0 0 0 11 
00 59 0 0 0 0 4 
00 60 0 0 0 0 8 
00 61 0 0 0 0 5 
00 62 1 0 0 0 10 
00 63 0 0 0 0 9 
01 00 0 0 0 0 15 
01 01 0 0 0 0 10 
01 02 0 0 0 0 8 
01 03 0 0 0 0 7 
01 04 0 0 0 0 10 
01 05 0 0 0 0 0 
01 06 0 0 0 0 10 
01 07 0 0 0 0 15 
01 08 0 0 0 0 4 
01 09 0 0 0 0 13 
01 10 0 0 0 0 9 
01 11 0 0 0 0 4 
01 12 0 0 0 0 12 
01 13 0 0 0 0 11 
01 14 0 0 0 0 7 
01 15 0 0 0 0 2 
01 16 0 0 0 0 7 
01 17 0 0 0 0 12 
01 18 0 0 0 0 6 
01 19 0 0 0 0 10 
01 20 0 0 0 0 9 
01 21 0 0 0 0 13 
01 22 0 0 0 0 6 
01 23 0 0 0 0 12 
01 24 0 0 0 0 5 
01 25 0 0 0 0 10 
01 26 0 0 0 0 9 
01 27 0 0 0 0 9 
01 28 0 0 0 0 5 
01 29 0 0 0 0 4 
01 30 0 0 0 0 9 
01 31 0 0 0 0 6 
01 32 0 0 0 0 10 
01 33 0 0 0 0 5 
01 34 1 0 0 0 15 
01 35 0 0 0 0 8 
01 36 0 0 0 0 4 
01 37 0 0 0 0 7 
01 38 0 0 0 0 12 
01 39 0 0 0 0 8 
01 40 0 0 0 0 9 
01 41 0 0 0 0 4 
01 42 0 0 0 0 12 
01 43 0 0 0 0 6 
01 44 0 0 0 0 6 
01 45 0 0 0 0 13 
01 46 0 0 0 0 12 
01 47 0 0 0 0 8 
01 48 0 0 0 0 4 
01 49 0 0 0 0 10 
01 50 0 0 0 0 10 
01 51 0 0 0 0 8 
01 52 0 0 0 0 10 
01 53 0 0 0 0 11 
01 54 0 0 0 0 11 
01 55 0 0 0 0 4 
01 56 0 0 0 0 13 
01 57 0 0 0 0 12 
01 58 0 0 0 0 4 
01 59 0 0 0 0 5 
01 60 0 0 0 0 9 
01 61 0 0 0 0 7 
01 62 0 0 0 0 7 
01 63 0 0 0 0 10 
02 00 0 0 0 0 6 
02 01 0 0 0 0 11 
02 02 0 0 0 0 14 
02 03 0 0 0 0 8 
02 04 0 0 0 0 11 
02 05 0 0 0 0 14 
02 06 0 0 0 0 11 
02 07 0 0 0 0 12 
02 08 0 0 0 0 7 
02 09 0 0 0 0 10 
02 10 0 0 0 0 6 
02 11 0 0 0 0 7 
02 12 0 0 0 0 9 
02 13 0 0 0 0 5 
02 14 0 0 0 0 8 
02 15 0 0 0 0 6 
02 16 0 0 0 0 10 
02 17 0 0 0 0 10 
02 18 0 0 0 0 10 
02 19 0 0 0 0 8 
02 20 0 0 0 0 9 
02 21 0 0 0 0 7 
02 22 0 0 0 0 4 
02 23 0 0 0 0 7 
02 24 0 0 0 0 12 
02 25 0 0 0 0 2 
02 26 0 0 0 0 2 
02 27 0 0 0 0 9 
02 28 0 0 0 0 7 
02 29 0 0 0 0 8 
02 30 0 0 0 0 9 
02 31 0 0 0 0 11 
02 32 0 0 0 0 7 
02 33 0 0 0 0 9 
02 34 0 0 0 0 6 
02 35 1 0 0 0 10 
02 36 0 0 0 0 10 
02 37 0 0 0 0 14 
02 38 0 0 0 0 7 
02 39 0 0 0 0 7 
02 40 0 0 0 0 7 
02 41 0 0 0 0 9 
02 42 0 0 0 0 6 
02 43 0 0 0 0 9 
02 44 0 0 0 0 4 
02 45 0 0 0 0 10 
02 46 0 0 0 0 12 
02 47 0 0 0 0 8 
02 48 0 0 0 0 5 
02 49 0 0 0 0 12 
02 50 0 0 0 0 5 
02 51 0 0 0 0 9 
02 52 0 0 0 0 6 
02 53 0 0 0 0 5 
02 54 0 0 0 0 6 
02 55 0 0 0 0 8 
02 56 0 0 0 0 4 
02 57 0 0 0 0 7 
02 58 0 0 0 0 15 
02 59 0 0 0 0 15 
02 60 0 0 0 0 8 
02 61 0 0 0 0 9 
02 62 0 0 0 0 12 
02 63 0 0 0 0 8 
03 00 0 0 0 0 8 
03 01 0 0 0 0 11 
03 02 0 0 0 0 5 
03 03 0 0 0 0 2 
03 04 0 0 0 0 6 
03 05 0 0 0 0 9 
03 06 0 0 0 0 6 
03 07 0 0 0 0 7 
03 08 0 0 0 0 8 
03 09 0 0 0 0 8 
03 10 0 0 0 0 6 
03 11 0 0 0 0 5 
03 12 0 0 0 0 12 
03 13 0 0 0 0 3 
03 14 0 0 0 0 9 
03 15 0 0 0 0 1 
03 16 0 0 0 0 6 
03 17 0 0 0 0 13 
03 18 0 0 0 0 15 
03 19 0 0 0 0 8 
03 20 0 0 0 0 8 
03 21 0 0 0 0 6 
03 22 0 0 0 0 7 
03 23 0 0 0 0 8 
03 24 0 0 0 0 4 
03 25 0 0 0 0 5 
03 26 0 0 0 0 6 
03 27 0 0 0 0 5 
03 28 0 0 0 0 11 
03 29 0 0 0 0 9 
03 30 0 0 0 0 6 
03 31 0 0 0 0 12 
03 32 0 0 0 0 6 
03 33 0 0 0 0 6 
03 34 0 0 0 0 9 
03 35 0 0 0 0 6 
03 36 0 0 0 0 10 
03 37 0 0 0 0 11 
03 38 0 0 0 0 10 
03 39 0 0 0 0 10 
03 40 0 0 0 0 4 
03 41 0 0 0 0 8 
03 42 0 0 0 0 12 
03 43 0 0 0 0 12 
03 44 0 0 0 0 9 
03 45 0 0 0 0 12 
03 46 0 0 0 0 9 
03 47 0 0 0 0 3 
03 48 0 0 0 0 9 
03 49 0 0 0 0 7 
03 50 0 0 0 0 1 
03 51 0 0 0 0 8 
03 52 0 0 0 0 9 
03 53 0 0 0 0 10 
03 54 0 0 0 0 4 
03 55 0 0 0 0 3 
03 56 0 0 0 0 12 
03 57 0 0 0 0 5 
03 58 0 0 0 0 4 
03 59 0 0 0 0 7 
03 60 1 0 0 0 8 
03 61 0 0 0 0 8 
03 62 0 0 0 0 8 
03 63 0 0 0 0 1 
04 00 0 0 0 0 8 
04 01 0 0 0 0 15 
04 02 0 0 0 0 12 
04 03 0 0 0 0 4 
04 04 0 0 0 0 9 
04 05 0 0 0 0 11 
04 06 0 0 0 0 14 
04 07 0 0 0 0 10 
04 08 0 0 0 0 4 
04 09 0 0 0 0 7 
04 10 0 0 0 0 8 
04 11 0 0 0 0 11 
04 12 0 0 0 0 9 
04 13 0 0 0 0 11 
04 14 0 0 0 0 7 
04 15 0 0 0 0 10 
04 16 0 0 0 0 3 
04 17 0 0 0 0 10 
04 18 0 0 0 0 11 
04 19 0 0 0 0 12 
04 20 0 0 0 0 10 
04 21 0 0 0 0 11 
04 22 0 0 0 0 8 
04 23 0 0 0 0 11 
04 24 0 0 0 0 2 
04 25 0 0 0 0 3 
04 26 0 0 0 0 9 
04 27 0 0 0 0 11 
04 28 0 0 0 0 7 
04 29 0 0 0 0 4 
04 30 0 0 0 0 5 
04 31 0 0 0 0 9 
04 32 0 0 0 0 4 
04 33 0 0 0 0 8 
04 34 0 0 0 0 7 
04 35 0 0 0 0 3 
04 36 0 0 0 0 4 
04 37 0 0 0 0 10
... 3802 more lines ...
Attachment 3: mpw4.conf 
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". 
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"


[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001  #8 coinc1+2
in0_STR = 0	# 0 
in0_DEL = 0	# 18
in1_STR = 0	# 0
in1_DEL = 0	# 18
in2_STR = 0	# 0
in2_DEL = 0 	# 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0x6

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x30 #0x00

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1


# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc

## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1




[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing


[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1


[Producer.RD50_MPW4_0]

[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1

[Monitor.mpw4_mon]
ENABLE_PRINT = 0
ENABLE_STD_PRINT = 0
ENABLE_STD_CONVERTER = 1
FORWARD2GUI = 1

[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
  38   Sat Mar 30 11:20:13 2024 bp, ci, hhRD50-MPW4 RD50-MPW4800 MeVLow Flux LowProtonGood   Normal  
alignment good now
  39   Sat Mar 30 11:55:55 2024 bp, ci, hhuseful datataking1023RD50-MPW4800 MeVLow Flux LowProtonGood30.03.2024 11:06:4930.03.2024 11:58:2251Normal  
automatic log for run 1023
Comment:
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 511
matrix_config = matrix_mpw4.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.92
th__i = 3
Attachment 2: matrix_mpw4.txt 
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} 

# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1 
00 00 0 0 0 0 13 
00 01 0 0 0 0 4 
00 02 0 0 0 0 9 
00 03 0 0 0 0 12 
00 04 0 0 0 0 7 
00 05 0 0 0 0 10 
00 06 0 0 0 0 8 
00 07 0 0 0 0 8 
00 08 0 0 0 0 8 
00 09 0 0 0 0 9 
00 10 0 0 0 0 10 
00 11 0 0 0 0 5 
00 12 0 0 0 0 14 
00 13 0 0 0 0 6 
00 14 0 0 0 0 7 
00 15 0 0 0 0 3 
00 16 0 0 0 0 5 
00 17 0 0 0 0 15 
00 18 0 0 0 0 12 
00 19 0 0 0 0 11 
00 20 0 0 0 0 6 
00 21 0 0 0 0 5 
00 22 0 0 0 0 7 
00 23 0 0 0 0 6 
00 24 0 0 0 0 10 
00 25 0 0 0 0 4 
00 26 0 0 0 0 6 
00 27 0 0 0 0 0 
00 28 0 0 0 0 6 
00 29 0 0 0 0 6 
00 30 0 0 0 0 11 
00 31 0 0 0 0 3 
00 32 0 0 0 0 6 
00 33 0 0 0 0 8 
00 34 0 0 0 0 9 
00 35 0 0 0 0 8 
00 36 0 0 0 0 11 
00 37 0 0 0 0 8 
00 38 0 0 0 0 11 
00 39 0 0 0 0 8 
00 40 0 0 0 0 13 
00 41 0 0 0 0 8 
00 42 0 0 0 0 7 
00 43 0 0 0 0 5 
00 44 0 0 0 0 10 
00 45 0 0 0 0 14 
00 46 0 0 0 0 3 
00 47 0 0 0 0 8 
00 48 0 0 0 0 7 
00 49 0 0 0 0 7 
00 50 0 0 0 0 5 
00 51 0 0 0 0 8 
00 52 0 0 0 0 11 
00 53 0 0 0 0 7 
00 54 0 0 0 0 8 
00 55 0 0 0 0 10 
00 56 0 0 0 0 11 
00 57 0 0 0 0 6 
00 58 0 0 0 0 11 
00 59 0 0 0 0 4 
00 60 0 0 0 0 8 
00 61 0 0 0 0 5 
00 62 1 0 0 0 10 
00 63 0 0 0 0 9 
01 00 0 0 0 0 15 
01 01 0 0 0 0 10 
01 02 0 0 0 0 8 
01 03 0 0 0 0 7 
01 04 0 0 0 0 10 
01 05 0 0 0 0 0 
01 06 0 0 0 0 10 
01 07 0 0 0 0 15 
01 08 0 0 0 0 4 
01 09 0 0 0 0 13 
01 10 0 0 0 0 9 
01 11 0 0 0 0 4 
01 12 0 0 0 0 12 
01 13 0 0 0 0 11 
01 14 0 0 0 0 7 
01 15 0 0 0 0 2 
01 16 0 0 0 0 7 
01 17 0 0 0 0 12 
01 18 0 0 0 0 6 
01 19 0 0 0 0 10 
01 20 0 0 0 0 9 
01 21 0 0 0 0 13 
01 22 0 0 0 0 6 
01 23 0 0 0 0 12 
01 24 0 0 0 0 5 
01 25 0 0 0 0 10 
01 26 0 0 0 0 9 
01 27 0 0 0 0 9 
01 28 0 0 0 0 5 
01 29 0 0 0 0 4 
01 30 0 0 0 0 9 
01 31 0 0 0 0 6 
01 32 0 0 0 0 10 
01 33 0 0 0 0 5 
01 34 1 0 0 0 15 
01 35 0 0 0 0 8 
01 36 0 0 0 0 4 
01 37 0 0 0 0 7 
01 38 0 0 0 0 12 
01 39 0 0 0 0 8 
01 40 0 0 0 0 9 
01 41 0 0 0 0 4 
01 42 0 0 0 0 12 
01 43 0 0 0 0 6 
01 44 0 0 0 0 6 
01 45 0 0 0 0 13 
01 46 0 0 0 0 12 
01 47 0 0 0 0 8 
01 48 0 0 0 0 4 
01 49 0 0 0 0 10 
01 50 0 0 0 0 10 
01 51 0 0 0 0 8 
01 52 0 0 0 0 10 
01 53 0 0 0 0 11 
01 54 0 0 0 0 11 
01 55 0 0 0 0 4 
01 56 0 0 0 0 13 
01 57 0 0 0 0 12 
01 58 0 0 0 0 4 
01 59 0 0 0 0 5 
01 60 0 0 0 0 9 
01 61 0 0 0 0 7 
01 62 0 0 0 0 7 
01 63 0 0 0 0 10 
02 00 0 0 0 0 6 
02 01 0 0 0 0 11 
02 02 0 0 0 0 14 
02 03 0 0 0 0 8 
02 04 0 0 0 0 11 
02 05 0 0 0 0 14 
02 06 0 0 0 0 11 
02 07 0 0 0 0 12 
02 08 0 0 0 0 7 
02 09 0 0 0 0 10 
02 10 0 0 0 0 6 
02 11 0 0 0 0 7 
02 12 0 0 0 0 9 
02 13 0 0 0 0 5 
02 14 0 0 0 0 8 
02 15 0 0 0 0 6 
02 16 0 0 0 0 10 
02 17 0 0 0 0 10 
02 18 0 0 0 0 10 
02 19 0 0 0 0 8 
02 20 0 0 0 0 9 
02 21 0 0 0 0 7 
02 22 0 0 0 0 4 
02 23 0 0 0 0 7 
02 24 0 0 0 0 12 
02 25 0 0 0 0 2 
02 26 0 0 0 0 2 
02 27 0 0 0 0 9 
02 28 0 0 0 0 7 
02 29 0 0 0 0 8 
02 30 0 0 0 0 9 
02 31 0 0 0 0 11 
02 32 0 0 0 0 7 
02 33 0 0 0 0 9 
02 34 0 0 0 0 6 
02 35 1 0 0 0 10 
02 36 0 0 0 0 10 
02 37 0 0 0 0 14 
02 38 0 0 0 0 7 
02 39 0 0 0 0 7 
02 40 0 0 0 0 7 
02 41 0 0 0 0 9 
02 42 0 0 0 0 6 
02 43 0 0 0 0 9 
02 44 0 0 0 0 4 
02 45 0 0 0 0 10 
02 46 0 0 0 0 12 
02 47 0 0 0 0 8 
02 48 0 0 0 0 5 
02 49 0 0 0 0 12 
02 50 0 0 0 0 5 
02 51 0 0 0 0 9 
02 52 0 0 0 0 6 
02 53 0 0 0 0 5 
02 54 0 0 0 0 6 
02 55 0 0 0 0 8 
02 56 0 0 0 0 4 
02 57 0 0 0 0 7 
02 58 0 0 0 0 15 
02 59 0 0 0 0 15 
02 60 0 0 0 0 8 
02 61 0 0 0 0 9 
02 62 0 0 0 0 12 
02 63 0 0 0 0 8 
03 00 0 0 0 0 8 
03 01 0 0 0 0 11 
03 02 0 0 0 0 5 
03 03 0 0 0 0 2 
03 04 0 0 0 0 6 
03 05 0 0 0 0 9 
03 06 0 0 0 0 6 
03 07 0 0 0 0 7 
03 08 0 0 0 0 8 
03 09 0 0 0 0 8 
03 10 0 0 0 0 6 
03 11 0 0 0 0 5 
03 12 0 0 0 0 12 
03 13 0 0 0 0 3 
03 14 0 0 0 0 9 
03 15 0 0 0 0 1 
03 16 0 0 0 0 6 
03 17 0 0 0 0 13 
03 18 0 0 0 0 15 
03 19 0 0 0 0 8 
03 20 0 0 0 0 8 
03 21 0 0 0 0 6 
03 22 0 0 0 0 7 
03 23 0 0 0 0 8 
03 24 0 0 0 0 4 
03 25 0 0 0 0 5 
03 26 0 0 0 0 6 
03 27 0 0 0 0 5 
03 28 0 0 0 0 11 
03 29 0 0 0 0 9 
03 30 0 0 0 0 6 
03 31 0 0 0 0 12 
03 32 0 0 0 0 6 
03 33 0 0 0 0 6 
03 34 0 0 0 0 9 
03 35 0 0 0 0 6 
03 36 0 0 0 0 10 
03 37 0 0 0 0 11 
03 38 0 0 0 0 10 
03 39 0 0 0 0 10 
03 40 0 0 0 0 4 
03 41 0 0 0 0 8 
03 42 0 0 0 0 12 
03 43 0 0 0 0 12 
03 44 0 0 0 0 9 
03 45 0 0 0 0 12 
03 46 0 0 0 0 9 
03 47 0 0 0 0 3 
03 48 0 0 0 0 9 
03 49 0 0 0 0 7 
03 50 0 0 0 0 1 
03 51 0 0 0 0 8 
03 52 0 0 0 0 9 
03 53 0 0 0 0 10 
03 54 0 0 0 0 4 
03 55 0 0 0 0 3 
03 56 0 0 0 0 12 
03 57 0 0 0 0 5 
03 58 0 0 0 0 4 
03 59 0 0 0 0 7 
03 60 1 0 0 0 8 
03 61 0 0 0 0 8 
03 62 0 0 0 0 8 
03 63 0 0 0 0 1 
04 00 0 0 0 0 8 
04 01 0 0 0 0 15 
04 02 0 0 0 0 12 
04 03 0 0 0 0 4 
04 04 0 0 0 0 9 
04 05 0 0 0 0 11 
04 06 0 0 0 0 14 
04 07 0 0 0 0 10 
04 08 0 0 0 0 4 
04 09 0 0 0 0 7 
04 10 0 0 0 0 8 
04 11 0 0 0 0 11 
04 12 0 0 0 0 9 
04 13 0 0 0 0 11 
04 14 0 0 0 0 7 
04 15 0 0 0 0 10 
04 16 0 0 0 0 3 
04 17 0 0 0 0 10 
04 18 0 0 0 0 11 
04 19 0 0 0 0 12 
04 20 0 0 0 0 10 
04 21 0 0 0 0 11 
04 22 0 0 0 0 8 
04 23 0 0 0 0 11 
04 24 0 0 0 0 2 
04 25 0 0 0 0 3 
04 26 0 0 0 0 9 
04 27 0 0 0 0 11 
04 28 0 0 0 0 7 
04 29 0 0 0 0 4 
04 30 0 0 0 0 5 
04 31 0 0 0 0 9 
04 32 0 0 0 0 4 
04 33 0 0 0 0 8 
04 34 0 0 0 0 7 
04 35 0 0 0 0 3 
04 36 0 0 0 0 4 
04 37 0 0 0 0 10
... 3802 more lines ...
Attachment 3: mpw4.conf 
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". 
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"


[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001  #8 coinc1+2
in0_STR = 0	# 0 
in0_DEL = 0	# 18
in1_STR = 0	# 0
in1_DEL = 0	# 18
in2_STR = 0	# 0
in2_DEL = 0 	# 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0x6

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x30 #0x00

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1


# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc

## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1




[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing


[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1


[Producer.RD50_MPW4_0]

[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1

[Monitor.mpw4_mon]
ENABLE_PRINT = 0
ENABLE_STD_PRINT = 0
ENABLE_STD_CONVERTER = 1
FORWARD2GUI = 1

[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
  40   Sat Mar 30 12:28:29 2024 bp, ci, hhuseful datataking1024RD50-MPW4800 MeVLow Flux LowProtonGood30.03.2024 11:58:4530.03.2024 12:30:5632Normal  
automatic log for run 1024
Comment:
changed thr to 1V (not 100% sure, configure was not executed)
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 511
matrix_config = matrix_mpw4.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 1
th__i = 3
Attachment 2: matrix_mpw4.txt 
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} 

# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1 
00 00 0 0 0 0 13 
00 01 0 0 0 0 4 
00 02 0 0 0 0 9 
00 03 0 0 0 0 12 
00 04 0 0 0 0 7 
00 05 0 0 0 0 10 
00 06 0 0 0 0 8 
00 07 0 0 0 0 8 
00 08 0 0 0 0 8 
00 09 0 0 0 0 9 
00 10 0 0 0 0 10 
00 11 0 0 0 0 5 
00 12 0 0 0 0 14 
00 13 0 0 0 0 6 
00 14 0 0 0 0 7 
00 15 0 0 0 0 3 
00 16 0 0 0 0 5 
00 17 0 0 0 0 15 
00 18 0 0 0 0 12 
00 19 0 0 0 0 11 
00 20 0 0 0 0 6 
00 21 0 0 0 0 5 
00 22 0 0 0 0 7 
00 23 0 0 0 0 6 
00 24 0 0 0 0 10 
00 25 0 0 0 0 4 
00 26 0 0 0 0 6 
00 27 0 0 0 0 0 
00 28 0 0 0 0 6 
00 29 0 0 0 0 6 
00 30 0 0 0 0 11 
00 31 0 0 0 0 3 
00 32 0 0 0 0 6 
00 33 0 0 0 0 8 
00 34 0 0 0 0 9 
00 35 0 0 0 0 8 
00 36 0 0 0 0 11 
00 37 0 0 0 0 8 
00 38 0 0 0 0 11 
00 39 0 0 0 0 8 
00 40 0 0 0 0 13 
00 41 0 0 0 0 8 
00 42 0 0 0 0 7 
00 43 0 0 0 0 5 
00 44 0 0 0 0 10 
00 45 0 0 0 0 14 
00 46 0 0 0 0 3 
00 47 0 0 0 0 8 
00 48 0 0 0 0 7 
00 49 0 0 0 0 7 
00 50 0 0 0 0 5 
00 51 0 0 0 0 8 
00 52 0 0 0 0 11 
00 53 0 0 0 0 7 
00 54 0 0 0 0 8 
00 55 0 0 0 0 10 
00 56 0 0 0 0 11 
00 57 0 0 0 0 6 
00 58 0 0 0 0 11 
00 59 0 0 0 0 4 
00 60 0 0 0 0 8 
00 61 0 0 0 0 5 
00 62 1 0 0 0 10 
00 63 0 0 0 0 9 
01 00 0 0 0 0 15 
01 01 0 0 0 0 10 
01 02 0 0 0 0 8 
01 03 0 0 0 0 7 
01 04 0 0 0 0 10 
01 05 0 0 0 0 0 
01 06 0 0 0 0 10 
01 07 0 0 0 0 15 
01 08 0 0 0 0 4 
01 09 0 0 0 0 13 
01 10 0 0 0 0 9 
01 11 0 0 0 0 4 
01 12 0 0 0 0 12 
01 13 0 0 0 0 11 
01 14 0 0 0 0 7 
01 15 0 0 0 0 2 
01 16 0 0 0 0 7 
01 17 0 0 0 0 12 
01 18 0 0 0 0 6 
01 19 0 0 0 0 10 
01 20 0 0 0 0 9 
01 21 0 0 0 0 13 
01 22 0 0 0 0 6 
01 23 0 0 0 0 12 
01 24 0 0 0 0 5 
01 25 0 0 0 0 10 
01 26 0 0 0 0 9 
01 27 0 0 0 0 9 
01 28 0 0 0 0 5 
01 29 0 0 0 0 4 
01 30 0 0 0 0 9 
01 31 0 0 0 0 6 
01 32 0 0 0 0 10 
01 33 0 0 0 0 5 
01 34 1 0 0 0 15 
01 35 0 0 0 0 8 
01 36 0 0 0 0 4 
01 37 0 0 0 0 7 
01 38 0 0 0 0 12 
01 39 0 0 0 0 8 
01 40 0 0 0 0 9 
01 41 0 0 0 0 4 
01 42 0 0 0 0 12 
01 43 0 0 0 0 6 
01 44 0 0 0 0 6 
01 45 0 0 0 0 13 
01 46 0 0 0 0 12 
01 47 0 0 0 0 8 
01 48 0 0 0 0 4 
01 49 0 0 0 0 10 
01 50 0 0 0 0 10 
01 51 0 0 0 0 8 
01 52 0 0 0 0 10 
01 53 0 0 0 0 11 
01 54 0 0 0 0 11 
01 55 0 0 0 0 4 
01 56 0 0 0 0 13 
01 57 0 0 0 0 12 
01 58 0 0 0 0 4 
01 59 0 0 0 0 5 
01 60 0 0 0 0 9 
01 61 0 0 0 0 7 
01 62 0 0 0 0 7 
01 63 0 0 0 0 10 
02 00 0 0 0 0 6 
02 01 0 0 0 0 11 
02 02 0 0 0 0 14 
02 03 0 0 0 0 8 
02 04 0 0 0 0 11 
02 05 0 0 0 0 14 
02 06 0 0 0 0 11 
02 07 0 0 0 0 12 
02 08 0 0 0 0 7 
02 09 0 0 0 0 10 
02 10 0 0 0 0 6 
02 11 0 0 0 0 7 
02 12 0 0 0 0 9 
02 13 0 0 0 0 5 
02 14 0 0 0 0 8 
02 15 0 0 0 0 6 
02 16 0 0 0 0 10 
02 17 0 0 0 0 10 
02 18 0 0 0 0 10 
02 19 0 0 0 0 8 
02 20 0 0 0 0 9 
02 21 0 0 0 0 7 
02 22 0 0 0 0 4 
02 23 0 0 0 0 7 
02 24 0 0 0 0 12 
02 25 0 0 0 0 2 
02 26 0 0 0 0 2 
02 27 0 0 0 0 9 
02 28 0 0 0 0 7 
02 29 0 0 0 0 8 
02 30 0 0 0 0 9 
02 31 0 0 0 0 11 
02 32 0 0 0 0 7 
02 33 0 0 0 0 9 
02 34 0 0 0 0 6 
02 35 1 0 0 0 10 
02 36 0 0 0 0 10 
02 37 0 0 0 0 14 
02 38 0 0 0 0 7 
02 39 0 0 0 0 7 
02 40 0 0 0 0 7 
02 41 0 0 0 0 9 
02 42 0 0 0 0 6 
02 43 0 0 0 0 9 
02 44 0 0 0 0 4 
02 45 0 0 0 0 10 
02 46 0 0 0 0 12 
02 47 0 0 0 0 8 
02 48 0 0 0 0 5 
02 49 0 0 0 0 12 
02 50 0 0 0 0 5 
02 51 0 0 0 0 9 
02 52 0 0 0 0 6 
02 53 0 0 0 0 5 
02 54 0 0 0 0 6 
02 55 0 0 0 0 8 
02 56 0 0 0 0 4 
02 57 0 0 0 0 7 
02 58 0 0 0 0 15 
02 59 0 0 0 0 15 
02 60 0 0 0 0 8 
02 61 0 0 0 0 9 
02 62 0 0 0 0 12 
02 63 0 0 0 0 8 
03 00 0 0 0 0 8 
03 01 0 0 0 0 11 
03 02 0 0 0 0 5 
03 03 0 0 0 0 2 
03 04 0 0 0 0 6 
03 05 0 0 0 0 9 
03 06 0 0 0 0 6 
03 07 0 0 0 0 7 
03 08 0 0 0 0 8 
03 09 0 0 0 0 8 
03 10 0 0 0 0 6 
03 11 0 0 0 0 5 
03 12 0 0 0 0 12 
03 13 0 0 0 0 3 
03 14 0 0 0 0 9 
03 15 0 0 0 0 1 
03 16 0 0 0 0 6 
03 17 0 0 0 0 13 
03 18 0 0 0 0 15 
03 19 0 0 0 0 8 
03 20 0 0 0 0 8 
03 21 0 0 0 0 6 
03 22 0 0 0 0 7 
03 23 0 0 0 0 8 
03 24 0 0 0 0 4 
03 25 0 0 0 0 5 
03 26 0 0 0 0 6 
03 27 0 0 0 0 5 
03 28 0 0 0 0 11 
03 29 0 0 0 0 9 
03 30 0 0 0 0 6 
03 31 0 0 0 0 12 
03 32 0 0 0 0 6 
03 33 0 0 0 0 6 
03 34 0 0 0 0 9 
03 35 0 0 0 0 6 
03 36 0 0 0 0 10 
03 37 0 0 0 0 11 
03 38 0 0 0 0 10 
03 39 0 0 0 0 10 
03 40 0 0 0 0 4 
03 41 0 0 0 0 8 
03 42 0 0 0 0 12 
03 43 0 0 0 0 12 
03 44 0 0 0 0 9 
03 45 0 0 0 0 12 
03 46 0 0 0 0 9 
03 47 0 0 0 0 3 
03 48 0 0 0 0 9 
03 49 0 0 0 0 7 
03 50 0 0 0 0 1 
03 51 0 0 0 0 8 
03 52 0 0 0 0 9 
03 53 0 0 0 0 10 
03 54 0 0 0 0 4 
03 55 0 0 0 0 3 
03 56 0 0 0 0 12 
03 57 0 0 0 0 5 
03 58 0 0 0 0 4 
03 59 0 0 0 0 7 
03 60 1 0 0 0 8 
03 61 0 0 0 0 8 
03 62 0 0 0 0 8 
03 63 0 0 0 0 1 
04 00 0 0 0 0 8 
04 01 0 0 0 0 15 
04 02 0 0 0 0 12 
04 03 0 0 0 0 4 
04 04 0 0 0 0 9 
04 05 0 0 0 0 11 
04 06 0 0 0 0 14 
04 07 0 0 0 0 10 
04 08 0 0 0 0 4 
04 09 0 0 0 0 7 
04 10 0 0 0 0 8 
04 11 0 0 0 0 11 
04 12 0 0 0 0 9 
04 13 0 0 0 0 11 
04 14 0 0 0 0 7 
04 15 0 0 0 0 10 
04 16 0 0 0 0 3 
04 17 0 0 0 0 10 
04 18 0 0 0 0 11 
04 19 0 0 0 0 12 
04 20 0 0 0 0 10 
04 21 0 0 0 0 11 
04 22 0 0 0 0 8 
04 23 0 0 0 0 11 
04 24 0 0 0 0 2 
04 25 0 0 0 0 3 
04 26 0 0 0 0 9 
04 27 0 0 0 0 11 
04 28 0 0 0 0 7 
04 29 0 0 0 0 4 
04 30 0 0 0 0 5 
04 31 0 0 0 0 9 
04 32 0 0 0 0 4 
04 33 0 0 0 0 8 
04 34 0 0 0 0 7 
04 35 0 0 0 0 3 
04 36 0 0 0 0 4 
04 37 0 0 0 0 10
... 3802 more lines ...
Attachment 3: mpw4.conf 
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". 
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"


[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001  #8 coinc1+2
in0_STR = 0	# 0 
in0_DEL = 0	# 18
in1_STR = 0	# 0
in1_DEL = 0	# 18
in2_STR = 0	# 0
in2_DEL = 0 	# 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0x6

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x30 #0x00

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1


# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc

## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1




[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing


[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1


[Producer.RD50_MPW4_0]

[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1

[Monitor.mpw4_mon]
ENABLE_PRINT = 0
ENABLE_STD_PRINT = 0
ENABLE_STD_CONVERTER = 1
FORWARD2GUI = 1

[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
  41   Sat Mar 30 12:54:24 2024 bp, ci, hhuseful datataking1025RD50-MPW4800 MeVLow Flux LowProtonGood30.03.2024 12:32:2730.03.2024 12:56:5124Normal  
automatic log for run 1025
Comment:
changed thr to 0.95V
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 511
matrix_config = matrix_mpw4.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = .95
th__i = 3
Attachment 2: matrix_mpw4.txt 
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} 

# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1 
00 00 0 0 0 0 13 
00 01 0 0 0 0 4 
00 02 0 0 0 0 9 
00 03 0 0 0 0 12 
00 04 0 0 0 0 7 
00 05 0 0 0 0 10 
00 06 0 0 0 0 8 
00 07 0 0 0 0 8 
00 08 0 0 0 0 8 
00 09 0 0 0 0 9 
00 10 0 0 0 0 10 
00 11 0 0 0 0 5 
00 12 0 0 0 0 14 
00 13 0 0 0 0 6 
00 14 0 0 0 0 7 
00 15 0 0 0 0 3 
00 16 0 0 0 0 5 
00 17 0 0 0 0 15 
00 18 0 0 0 0 12 
00 19 0 0 0 0 11 
00 20 0 0 0 0 6 
00 21 0 0 0 0 5 
00 22 0 0 0 0 7 
00 23 0 0 0 0 6 
00 24 0 0 0 0 10 
00 25 0 0 0 0 4 
00 26 0 0 0 0 6 
00 27 0 0 0 0 0 
00 28 0 0 0 0 6 
00 29 0 0 0 0 6 
00 30 0 0 0 0 11 
00 31 0 0 0 0 3 
00 32 0 0 0 0 6 
00 33 0 0 0 0 8 
00 34 0 0 0 0 9 
00 35 0 0 0 0 8 
00 36 0 0 0 0 11 
00 37 0 0 0 0 8 
00 38 0 0 0 0 11 
00 39 0 0 0 0 8 
00 40 0 0 0 0 13 
00 41 0 0 0 0 8 
00 42 0 0 0 0 7 
00 43 0 0 0 0 5 
00 44 0 0 0 0 10 
00 45 0 0 0 0 14 
00 46 0 0 0 0 3 
00 47 0 0 0 0 8 
00 48 0 0 0 0 7 
00 49 0 0 0 0 7 
00 50 0 0 0 0 5 
00 51 0 0 0 0 8 
00 52 0 0 0 0 11 
00 53 0 0 0 0 7 
00 54 0 0 0 0 8 
00 55 0 0 0 0 10 
00 56 0 0 0 0 11 
00 57 0 0 0 0 6 
00 58 0 0 0 0 11 
00 59 0 0 0 0 4 
00 60 0 0 0 0 8 
00 61 0 0 0 0 5 
00 62 1 0 0 0 10 
00 63 0 0 0 0 9 
01 00 0 0 0 0 15 
01 01 0 0 0 0 10 
01 02 0 0 0 0 8 
01 03 0 0 0 0 7 
01 04 0 0 0 0 10 
01 05 0 0 0 0 0 
01 06 0 0 0 0 10 
01 07 0 0 0 0 15 
01 08 0 0 0 0 4 
01 09 0 0 0 0 13 
01 10 0 0 0 0 9 
01 11 0 0 0 0 4 
01 12 0 0 0 0 12 
01 13 0 0 0 0 11 
01 14 0 0 0 0 7 
01 15 0 0 0 0 2 
01 16 0 0 0 0 7 
01 17 0 0 0 0 12 
01 18 0 0 0 0 6 
01 19 0 0 0 0 10 
01 20 0 0 0 0 9 
01 21 0 0 0 0 13 
01 22 0 0 0 0 6 
01 23 0 0 0 0 12 
01 24 0 0 0 0 5 
01 25 0 0 0 0 10 
01 26 0 0 0 0 9 
01 27 0 0 0 0 9 
01 28 0 0 0 0 5 
01 29 0 0 0 0 4 
01 30 0 0 0 0 9 
01 31 0 0 0 0 6 
01 32 0 0 0 0 10 
01 33 0 0 0 0 5 
01 34 1 0 0 0 15 
01 35 0 0 0 0 8 
01 36 0 0 0 0 4 
01 37 0 0 0 0 7 
01 38 0 0 0 0 12 
01 39 0 0 0 0 8 
01 40 0 0 0 0 9 
01 41 0 0 0 0 4 
01 42 0 0 0 0 12 
01 43 0 0 0 0 6 
01 44 0 0 0 0 6 
01 45 0 0 0 0 13 
01 46 0 0 0 0 12 
01 47 0 0 0 0 8 
01 48 0 0 0 0 4 
01 49 0 0 0 0 10 
01 50 0 0 0 0 10 
01 51 0 0 0 0 8 
01 52 0 0 0 0 10 
01 53 0 0 0 0 11 
01 54 0 0 0 0 11 
01 55 0 0 0 0 4 
01 56 0 0 0 0 13 
01 57 0 0 0 0 12 
01 58 0 0 0 0 4 
01 59 0 0 0 0 5 
01 60 0 0 0 0 9 
01 61 0 0 0 0 7 
01 62 0 0 0 0 7 
01 63 0 0 0 0 10 
02 00 0 0 0 0 6 
02 01 0 0 0 0 11 
02 02 0 0 0 0 14 
02 03 0 0 0 0 8 
02 04 0 0 0 0 11 
02 05 0 0 0 0 14 
02 06 0 0 0 0 11 
02 07 0 0 0 0 12 
02 08 0 0 0 0 7 
02 09 0 0 0 0 10 
02 10 0 0 0 0 6 
02 11 0 0 0 0 7 
02 12 0 0 0 0 9 
02 13 0 0 0 0 5 
02 14 0 0 0 0 8 
02 15 0 0 0 0 6 
02 16 0 0 0 0 10 
02 17 0 0 0 0 10 
02 18 0 0 0 0 10 
02 19 0 0 0 0 8 
02 20 0 0 0 0 9 
02 21 0 0 0 0 7 
02 22 0 0 0 0 4 
02 23 0 0 0 0 7 
02 24 0 0 0 0 12 
02 25 0 0 0 0 2 
02 26 0 0 0 0 2 
02 27 0 0 0 0 9 
02 28 0 0 0 0 7 
02 29 0 0 0 0 8 
02 30 0 0 0 0 9 
02 31 0 0 0 0 11 
02 32 0 0 0 0 7 
02 33 0 0 0 0 9 
02 34 0 0 0 0 6 
02 35 1 0 0 0 10 
02 36 0 0 0 0 10 
02 37 0 0 0 0 14 
02 38 0 0 0 0 7 
02 39 0 0 0 0 7 
02 40 0 0 0 0 7 
02 41 0 0 0 0 9 
02 42 0 0 0 0 6 
02 43 0 0 0 0 9 
02 44 0 0 0 0 4 
02 45 0 0 0 0 10 
02 46 0 0 0 0 12 
02 47 0 0 0 0 8 
02 48 0 0 0 0 5 
02 49 0 0 0 0 12 
02 50 0 0 0 0 5 
02 51 0 0 0 0 9 
02 52 0 0 0 0 6 
02 53 0 0 0 0 5 
02 54 0 0 0 0 6 
02 55 0 0 0 0 8 
02 56 0 0 0 0 4 
02 57 0 0 0 0 7 
02 58 0 0 0 0 15 
02 59 0 0 0 0 15 
02 60 0 0 0 0 8 
02 61 0 0 0 0 9 
02 62 0 0 0 0 12 
02 63 0 0 0 0 8 
03 00 0 0 0 0 8 
03 01 0 0 0 0 11 
03 02 0 0 0 0 5 
03 03 0 0 0 0 2 
03 04 0 0 0 0 6 
03 05 0 0 0 0 9 
03 06 0 0 0 0 6 
03 07 0 0 0 0 7 
03 08 0 0 0 0 8 
03 09 0 0 0 0 8 
03 10 0 0 0 0 6 
03 11 0 0 0 0 5 
03 12 0 0 0 0 12 
03 13 0 0 0 0 3 
03 14 0 0 0 0 9 
03 15 0 0 0 0 1 
03 16 0 0 0 0 6 
03 17 0 0 0 0 13 
03 18 0 0 0 0 15 
03 19 0 0 0 0 8 
03 20 0 0 0 0 8 
03 21 0 0 0 0 6 
03 22 0 0 0 0 7 
03 23 0 0 0 0 8 
03 24 0 0 0 0 4 
03 25 0 0 0 0 5 
03 26 0 0 0 0 6 
03 27 0 0 0 0 5 
03 28 0 0 0 0 11 
03 29 0 0 0 0 9 
03 30 0 0 0 0 6 
03 31 0 0 0 0 12 
03 32 0 0 0 0 6 
03 33 0 0 0 0 6 
03 34 0 0 0 0 9 
03 35 0 0 0 0 6 
03 36 0 0 0 0 10 
03 37 0 0 0 0 11 
03 38 0 0 0 0 10 
03 39 0 0 0 0 10 
03 40 0 0 0 0 4 
03 41 0 0 0 0 8 
03 42 0 0 0 0 12 
03 43 0 0 0 0 12 
03 44 0 0 0 0 9 
03 45 0 0 0 0 12 
03 46 0 0 0 0 9 
03 47 0 0 0 0 3 
03 48 0 0 0 0 9 
03 49 0 0 0 0 7 
03 50 0 0 0 0 1 
03 51 0 0 0 0 8 
03 52 0 0 0 0 9 
03 53 0 0 0 0 10 
03 54 0 0 0 0 4 
03 55 0 0 0 0 3 
03 56 0 0 0 0 12 
03 57 0 0 0 0 5 
03 58 0 0 0 0 4 
03 59 0 0 0 0 7 
03 60 1 0 0 0 8 
03 61 0 0 0 0 8 
03 62 0 0 0 0 8 
03 63 0 0 0 0 1 
04 00 0 0 0 0 8 
04 01 0 0 0 0 15 
04 02 0 0 0 0 12 
04 03 0 0 0 0 4 
04 04 0 0 0 0 9 
04 05 0 0 0 0 11 
04 06 0 0 0 0 14 
04 07 0 0 0 0 10 
04 08 0 0 0 0 4 
04 09 0 0 0 0 7 
04 10 0 0 0 0 8 
04 11 0 0 0 0 11 
04 12 0 0 0 0 9 
04 13 0 0 0 0 11 
04 14 0 0 0 0 7 
04 15 0 0 0 0 10 
04 16 0 0 0 0 3 
04 17 0 0 0 0 10 
04 18 0 0 0 0 11 
04 19 0 0 0 0 12 
04 20 0 0 0 0 10 
04 21 0 0 0 0 11 
04 22 0 0 0 0 8 
04 23 0 0 0 0 11 
04 24 0 0 0 0 2 
04 25 0 0 0 0 3 
04 26 0 0 0 0 9 
04 27 0 0 0 0 11 
04 28 0 0 0 0 7 
04 29 0 0 0 0 4 
04 30 0 0 0 0 5 
04 31 0 0 0 0 9 
04 32 0 0 0 0 4 
04 33 0 0 0 0 8 
04 34 0 0 0 0 7 
04 35 0 0 0 0 3 
04 36 0 0 0 0 4 
04 37 0 0 0 0 10
... 3802 more lines ...
Attachment 3: mpw4.conf 
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". 
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"


[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001  #8 coinc1+2
in0_STR = 0	# 0 
in0_DEL = 0	# 18
in1_STR = 0	# 0
in1_DEL = 0	# 18
in2_STR = 0	# 0
in2_DEL = 0 	# 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0x6

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x30 #0x00

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1


# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc

## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1




[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing


[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1


[Producer.RD50_MPW4_0]

[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1

[Monitor.mpw4_mon]
ENABLE_PRINT = 0
ENABLE_STD_PRINT = 0
ENABLE_STD_CONVERTER = 1
FORWARD2GUI = 1

[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
  42   Sat Mar 30 13:28:15 2024 bp, ci, hhuseful datataking1026RD50-MPW4800 MeVLow Flux LowProtonGood30.03.2024 12:58:0230.03.2024 13:30:4232Normal  
automatic log for run 1026
Comment:
changed thr to 0.98V
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 511
matrix_config = matrix_mpw4.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 0
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = .98
th__i = 3
Attachment 2: matrix_mpw4.txt 
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} 

# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1 
00 00 0 0 0 0 13 
00 01 0 0 0 0 4 
00 02 0 0 0 0 9 
00 03 0 0 0 0 12 
00 04 0 0 0 0 7 
00 05 0 0 0 0 10 
00 06 0 0 0 0 8 
00 07 0 0 0 0 8 
00 08 0 0 0 0 8 
00 09 0 0 0 0 9 
00 10 0 0 0 0 10 
00 11 0 0 0 0 5 
00 12 0 0 0 0 14 
00 13 0 0 0 0 6 
00 14 0 0 0 0 7 
00 15 0 0 0 0 3 
00 16 0 0 0 0 5 
00 17 0 0 0 0 15 
00 18 0 0 0 0 12 
00 19 0 0 0 0 11 
00 20 0 0 0 0 6 
00 21 0 0 0 0 5 
00 22 0 0 0 0 7 
00 23 0 0 0 0 6 
00 24 0 0 0 0 10 
00 25 0 0 0 0 4 
00 26 0 0 0 0 6 
00 27 0 0 0 0 0 
00 28 0 0 0 0 6 
00 29 0 0 0 0 6 
00 30 0 0 0 0 11 
00 31 0 0 0 0 3 
00 32 0 0 0 0 6 
00 33 0 0 0 0 8 
00 34 0 0 0 0 9 
00 35 0 0 0 0 8 
00 36 0 0 0 0 11 
00 37 0 0 0 0 8 
00 38 0 0 0 0 11 
00 39 0 0 0 0 8 
00 40 0 0 0 0 13 
00 41 0 0 0 0 8 
00 42 0 0 0 0 7 
00 43 0 0 0 0 5 
00 44 0 0 0 0 10 
00 45 0 0 0 0 14 
00 46 0 0 0 0 3 
00 47 0 0 0 0 8 
00 48 0 0 0 0 7 
00 49 0 0 0 0 7 
00 50 0 0 0 0 5 
00 51 0 0 0 0 8 
00 52 0 0 0 0 11 
00 53 0 0 0 0 7 
00 54 0 0 0 0 8 
00 55 0 0 0 0 10 
00 56 0 0 0 0 11 
00 57 0 0 0 0 6 
00 58 0 0 0 0 11 
00 59 0 0 0 0 4 
00 60 0 0 0 0 8 
00 61 0 0 0 0 5 
00 62 1 0 0 0 10 
00 63 0 0 0 0 9 
01 00 0 0 0 0 15 
01 01 0 0 0 0 10 
01 02 0 0 0 0 8 
01 03 0 0 0 0 7 
01 04 0 0 0 0 10 
01 05 0 0 0 0 0 
01 06 0 0 0 0 10 
01 07 0 0 0 0 15 
01 08 0 0 0 0 4 
01 09 0 0 0 0 13 
01 10 0 0 0 0 9 
01 11 0 0 0 0 4 
01 12 0 0 0 0 12 
01 13 0 0 0 0 11 
01 14 0 0 0 0 7 
01 15 0 0 0 0 2 
01 16 0 0 0 0 7 
01 17 0 0 0 0 12 
01 18 0 0 0 0 6 
01 19 0 0 0 0 10 
01 20 0 0 0 0 9 
01 21 0 0 0 0 13 
01 22 0 0 0 0 6 
01 23 0 0 0 0 12 
01 24 0 0 0 0 5 
01 25 0 0 0 0 10 
01 26 0 0 0 0 9 
01 27 0 0 0 0 9 
01 28 0 0 0 0 5 
01 29 0 0 0 0 4 
01 30 0 0 0 0 9 
01 31 0 0 0 0 6 
01 32 0 0 0 0 10 
01 33 0 0 0 0 5 
01 34 1 0 0 0 15 
01 35 0 0 0 0 8 
01 36 0 0 0 0 4 
01 37 0 0 0 0 7 
01 38 0 0 0 0 12 
01 39 0 0 0 0 8 
01 40 0 0 0 0 9 
01 41 0 0 0 0 4 
01 42 0 0 0 0 12 
01 43 0 0 0 0 6 
01 44 0 0 0 0 6 
01 45 0 0 0 0 13 
01 46 0 0 0 0 12 
01 47 0 0 0 0 8 
01 48 0 0 0 0 4 
01 49 0 0 0 0 10 
01 50 0 0 0 0 10 
01 51 0 0 0 0 8 
01 52 0 0 0 0 10 
01 53 0 0 0 0 11 
01 54 0 0 0 0 11 
01 55 0 0 0 0 4 
01 56 0 0 0 0 13 
01 57 0 0 0 0 12 
01 58 0 0 0 0 4 
01 59 0 0 0 0 5 
01 60 0 0 0 0 9 
01 61 0 0 0 0 7 
01 62 0 0 0 0 7 
01 63 0 0 0 0 10 
02 00 0 0 0 0 6 
02 01 0 0 0 0 11 
02 02 0 0 0 0 14 
02 03 0 0 0 0 8 
02 04 0 0 0 0 11 
02 05 0 0 0 0 14 
02 06 0 0 0 0 11 
02 07 0 0 0 0 12 
02 08 0 0 0 0 7 
02 09 0 0 0 0 10 
02 10 0 0 0 0 6 
02 11 0 0 0 0 7 
02 12 0 0 0 0 9 
02 13 0 0 0 0 5 
02 14 0 0 0 0 8 
02 15 0 0 0 0 6 
02 16 0 0 0 0 10 
02 17 0 0 0 0 10 
02 18 0 0 0 0 10 
02 19 0 0 0 0 8 
02 20 0 0 0 0 9 
02 21 0 0 0 0 7 
02 22 0 0 0 0 4 
02 23 0 0 0 0 7 
02 24 0 0 0 0 12 
02 25 0 0 0 0 2 
02 26 0 0 0 0 2 
02 27 0 0 0 0 9 
02 28 0 0 0 0 7 
02 29 0 0 0 0 8 
02 30 0 0 0 0 9 
02 31 0 0 0 0 11 
02 32 0 0 0 0 7 
02 33 0 0 0 0 9 
02 34 0 0 0 0 6 
02 35 1 0 0 0 10 
02 36 0 0 0 0 10 
02 37 0 0 0 0 14 
02 38 0 0 0 0 7 
02 39 0 0 0 0 7 
02 40 0 0 0 0 7 
02 41 0 0 0 0 9 
02 42 0 0 0 0 6 
02 43 0 0 0 0 9 
02 44 0 0 0 0 4 
02 45 0 0 0 0 10 
02 46 0 0 0 0 12 
02 47 0 0 0 0 8 
02 48 0 0 0 0 5 
02 49 0 0 0 0 12 
02 50 0 0 0 0 5 
02 51 0 0 0 0 9 
02 52 0 0 0 0 6 
02 53 0 0 0 0 5 
02 54 0 0 0 0 6 
02 55 0 0 0 0 8 
02 56 0 0 0 0 4 
02 57 0 0 0 0 7 
02 58 0 0 0 0 15 
02 59 0 0 0 0 15 
02 60 0 0 0 0 8 
02 61 0 0 0 0 9 
02 62 0 0 0 0 12 
02 63 0 0 0 0 8 
03 00 0 0 0 0 8 
03 01 0 0 0 0 11 
03 02 0 0 0 0 5 
03 03 0 0 0 0 2 
03 04 0 0 0 0 6 
03 05 0 0 0 0 9 
03 06 0 0 0 0 6 
03 07 0 0 0 0 7 
03 08 0 0 0 0 8 
03 09 0 0 0 0 8 
03 10 0 0 0 0 6 
03 11 0 0 0 0 5 
03 12 0 0 0 0 12 
03 13 0 0 0 0 3 
03 14 0 0 0 0 9 
03 15 0 0 0 0 1 
03 16 0 0 0 0 6 
03 17 0 0 0 0 13 
03 18 0 0 0 0 15 
03 19 0 0 0 0 8 
03 20 0 0 0 0 8 
03 21 0 0 0 0 6 
03 22 0 0 0 0 7 
03 23 0 0 0 0 8 
03 24 0 0 0 0 4 
03 25 0 0 0 0 5 
03 26 0 0 0 0 6 
03 27 0 0 0 0 5 
03 28 0 0 0 0 11 
03 29 0 0 0 0 9 
03 30 0 0 0 0 6 
03 31 0 0 0 0 12 
03 32 0 0 0 0 6 
03 33 0 0 0 0 6 
03 34 0 0 0 0 9 
03 35 0 0 0 0 6 
03 36 0 0 0 0 10 
03 37 0 0 0 0 11 
03 38 0 0 0 0 10 
03 39 0 0 0 0 10 
03 40 0 0 0 0 4 
03 41 0 0 0 0 8 
03 42 0 0 0 0 12 
03 43 0 0 0 0 12 
03 44 0 0 0 0 9 
03 45 0 0 0 0 12 
03 46 0 0 0 0 9 
03 47 0 0 0 0 3 
03 48 0 0 0 0 9 
03 49 0 0 0 0 7 
03 50 0 0 0 0 1 
03 51 0 0 0 0 8 
03 52 0 0 0 0 9 
03 53 0 0 0 0 10 
03 54 0 0 0 0 4 
03 55 0 0 0 0 3 
03 56 0 0 0 0 12 
03 57 0 0 0 0 5 
03 58 0 0 0 0 4 
03 59 0 0 0 0 7 
03 60 1 0 0 0 8 
03 61 0 0 0 0 8 
03 62 0 0 0 0 8 
03 63 0 0 0 0 1 
04 00 0 0 0 0 8 
04 01 0 0 0 0 15 
04 02 0 0 0 0 12 
04 03 0 0 0 0 4 
04 04 0 0 0 0 9 
04 05 0 0 0 0 11 
04 06 0 0 0 0 14 
04 07 0 0 0 0 10 
04 08 0 0 0 0 4 
04 09 0 0 0 0 7 
04 10 0 0 0 0 8 
04 11 0 0 0 0 11 
04 12 0 0 0 0 9 
04 13 0 0 0 0 11 
04 14 0 0 0 0 7 
04 15 0 0 0 0 10 
04 16 0 0 0 0 3 
04 17 0 0 0 0 10 
04 18 0 0 0 0 11 
04 19 0 0 0 0 12 
04 20 0 0 0 0 10 
04 21 0 0 0 0 11 
04 22 0 0 0 0 8 
04 23 0 0 0 0 11 
04 24 0 0 0 0 2 
04 25 0 0 0 0 3 
04 26 0 0 0 0 9 
04 27 0 0 0 0 11 
04 28 0 0 0 0 7 
04 29 0 0 0 0 4 
04 30 0 0 0 0 5 
04 31 0 0 0 0 9 
04 32 0 0 0 0 4 
04 33 0 0 0 0 8 
04 34 0 0 0 0 7 
04 35 0 0 0 0 3 
04 36 0 0 0 0 4 
04 37 0 0 0 0 10
... 3802 more lines ...
Attachment 3: mpw4.conf 
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". 
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"


[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001  #8 coinc1+2
in0_STR = 0	# 0 
in0_DEL = 0	# 18
in1_STR = 0	# 0
in1_DEL = 0	# 18
in2_STR = 0	# 0
in2_DEL = 0 	# 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0x6

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x30 #0x00

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1


# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc

## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1




[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing


[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1


[Producer.RD50_MPW4_0]

[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1

[Monitor.mpw4_mon]
ENABLE_PRINT = 0
ENABLE_STD_PRINT = 0
ENABLE_STD_CONVERTER = 1
FORWARD2GUI = 1

[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
  43   Sat Mar 30 13:35:09 2024 bp, ci, hhuseful datataking RD50-MPW4800 MeVLow Flux LowProtonGood   Normal  
new users arrived
  44   Sat Mar 30 15:02:07 2024 hh, mb, ps1st tests1027TJ-Monopix2800 MeVLow Flux LowProtonUnknown30.03.2024 14:52:5430.03.2024 15:04:3211HV  
automatic log for run 1027
Comment:
Attachment 1: tjmonopix2.conf 
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". 
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"


[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 0
HDMI2_clk = 1
HDMI3_clk = 0
HDMI4_clk = 0
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001  #8 coinc1+2
in0_STR = 0	# 0 
in0_DEL = 0	# 18
in1_STR = 0	# 0
in1_DEL = 0	# 18
in2_STR = 0	# 0
in2_DEL = 0 	# 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xB

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x00 #0x00

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x3 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1


# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc

## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1




[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing


[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1


[Producer.tjmonopix2_AB]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_AB
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1

START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1

[DataCollector.dc_tjmonopix2_AB]
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X
DISABLE_PRINT = 1


[Producer.tjmonopix2_CD]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_CD
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1

START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1


[DataCollector.dc_tjmonopix2_CD]
EUDAQ_MN = monopix2_mon
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X
DISABLE_PRINT = 1



[Producer.elog1]
#start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
#files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
  45   Sat Mar 30 15:05:28 2024 hh, mb, ps1st tests1028TJ-Monopix2800 MeVLow Flux LowProtonUnknown30.03.2024 15:04:4730.03.2024 15:07:553HV  
automatic log for run 1028
Comment:
Attachment 1: tjmonopix2.conf 
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". 
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"


[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 0
HDMI2_clk = 1
HDMI3_clk = 0
HDMI4_clk = 0
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001  #8 coinc1+2
in0_STR = 0	# 0 
in0_DEL = 0	# 18
in1_STR = 0	# 0
in1_DEL = 0	# 18
in2_STR = 0	# 0
in2_DEL = 0 	# 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xB

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x00 #0x00

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x3 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1


# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc

## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1




[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing


[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1


[Producer.tjmonopix2_AB]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_AB
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1

START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1

[DataCollector.dc_tjmonopix2_AB]
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X
DISABLE_PRINT = 1


[Producer.tjmonopix2_CD]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_CD
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1

START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1


[DataCollector.dc_tjmonopix2_CD]
EUDAQ_MN = monopix2_mon
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X
DISABLE_PRINT = 1



[Producer.elog1]
#start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
#files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
  46   Sat Mar 30 15:08:33 2024 hh, mb, ps1st tests1029TJ-Monopix2800 MeVLow Flux LowProtonUnknown30.03.2024 15:08:2630.03.2024 15:11:002HV  
automatic log for run 1029
Comment:
Attachment 1: tjmonopix2.conf 
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". 
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"


[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 0
HDMI2_clk = 1
HDMI3_clk = 0
HDMI4_clk = 0
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001  #8 coinc1+2
in0_STR = 0	# 0 
in0_DEL = 0	# 18
in1_STR = 0	# 0
in1_DEL = 0	# 18
in2_STR = 0	# 0
in2_DEL = 0 	# 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xB

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x00 #0x00

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x3 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1


# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc

## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1




[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing


[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1


[Producer.tjmonopix2_AB]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_AB
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1

START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1

[DataCollector.dc_tjmonopix2_AB]
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X
DISABLE_PRINT = 1


[Producer.tjmonopix2_CD]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_CD
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1

START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1


[DataCollector.dc_tjmonopix2_CD]
EUDAQ_MN = monopix2_mon
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X
DISABLE_PRINT = 1



[Producer.elog1]
#start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
#files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
  47   Sat Mar 30 15:18:29 2024 hh, mb, ps1st tests1030TJ-Monopix2800 MeVLow Flux LowProtonUnknown30.03.2024 15:18:2130.03.2024 15:20:552HV  
automatic log for run 1030
Comment:
Attachment 1: tjmonopix2.conf 
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". 
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"


[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 0
HDMI2_clk = 1
HDMI3_clk = 0
HDMI4_clk = 0
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001  #8 coinc1+2
in0_STR = 0	# 0 
in0_DEL = 0	# 18
in1_STR = 0	# 0
in1_DEL = 0	# 18
in2_STR = 0	# 0
in2_DEL = 0 	# 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xB

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x00 #0x00

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x3 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1


# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc

## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1




[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing


[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1


[Producer.tjmonopix2_AB]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_AB
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1

START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1

[DataCollector.dc_tjmonopix2_AB]
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X
DISABLE_PRINT = 1


[Producer.tjmonopix2_CD]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_CD
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1

START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1


[DataCollector.dc_tjmonopix2_CD]
EUDAQ_MN = monopix2_mon
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X
DISABLE_PRINT = 1



[Producer.elog1]
#start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
#files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
  48   Sat Mar 30 15:20:37 2024 hh, mb, ps1st tests1031TJ-Monopix2800 MeVLow Flux LowProtonUnknown30.03.2024 15:21:5130.03.2024 15:23:031HV  
automatic log for run 1031
Comment:
Attachment 1: tjmonopix2.conf 
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". 
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"


[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 0
HDMI2_clk = 1
HDMI3_clk = 0
HDMI4_clk = 0
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001  #8 coinc1+2
in0_STR = 0	# 0 
in0_DEL = 0	# 18
in1_STR = 0	# 0
in1_DEL = 0	# 18
in2_STR = 0	# 0
in2_DEL = 0 	# 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xB

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x00 #0x00

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x3 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1


# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc

## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1




[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing


[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1


[Producer.tjmonopix2_AB]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_AB
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1

START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1

[DataCollector.dc_tjmonopix2_AB]
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X
DISABLE_PRINT = 1


[Producer.tjmonopix2_CD]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_CD
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1

START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1


[DataCollector.dc_tjmonopix2_CD]
EUDAQ_MN = monopix2_mon
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X
DISABLE_PRINT = 1



[Producer.elog1]
#start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
#files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
  49   Sat Mar 30 15:22:15 2024 hh, mb, ps1st tests1032TJ-Monopix2800 MeVLow Flux LowProtonUnknown30.03.2024 15:24:0230.03.2024 15:24:410HV  
automatic log for run 1032
Comment:
Attachment 1: tjmonopix2.conf 
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". 
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"


[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 0
HDMI2_clk = 1
HDMI3_clk = 0
HDMI4_clk = 0
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001  #8 coinc1+2
in0_STR = 0	# 0 
in0_DEL = 0	# 18
in1_STR = 0	# 0
in1_DEL = 0	# 18
in2_STR = 0	# 0
in2_DEL = 0 	# 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xC

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x00 #0x00

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x3 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1


# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc

## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1




[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing


[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1


[Producer.tjmonopix2_AB]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_AB
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1

START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1

[DataCollector.dc_tjmonopix2_AB]
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X
DISABLE_PRINT = 1


[Producer.tjmonopix2_CD]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_CD
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1

START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1


[DataCollector.dc_tjmonopix2_CD]
EUDAQ_MN = monopix2_mon
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X
DISABLE_PRINT = 1



[Producer.elog1]
#start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
#files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
  50   Sat Mar 30 15:24:44 2024 hh, mb, ps1st tests1033TJ-Monopix2800 MeVLow Flux LowProtonUnknown30.03.2024 15:25:0630.03.2024 15:27:102HV  
automatic log for run 1033
Comment:
Attachment 1: tjmonopix2.conf 
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". 
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"


[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 0
HDMI2_clk = 1
HDMI3_clk = 0
HDMI4_clk = 0
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001  #8 coinc1+2
in0_STR = 0	# 0 
in0_DEL = 0	# 18
in1_STR = 0	# 0
in1_DEL = 0	# 18
in2_STR = 0	# 0
in2_DEL = 0 	# 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xC

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x00 #0x00

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x3 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1


# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc

## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1




[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing


[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1


[Producer.tjmonopix2_AB]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_AB
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1

START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1

[DataCollector.dc_tjmonopix2_AB]
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X
DISABLE_PRINT = 1


[Producer.tjmonopix2_CD]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_CD
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1

START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1


[DataCollector.dc_tjmonopix2_CD]
EUDAQ_MN = monopix2_mon
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X
DISABLE_PRINT = 1



[Producer.elog1]
#start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
#files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
  51   Sat Mar 30 15:31:41 2024 hh, mb, ps1st tests1034TJ-Monopix2800 MeVLow Flux LowProtonUnknown30.03.2024 15:29:4930.03.2024 15:34:084HV  
automatic log for run 1034
Comment:
Attachment 1: tjmonopix2.conf 
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". 
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"


[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 0
HDMI2_clk = 1
HDMI3_clk = 0
HDMI4_clk = 0
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001  #8 coinc1+2
in0_STR = 0	# 0 
in0_DEL = 0	# 18
in1_STR = 0	# 0
in1_DEL = 0	# 18
in2_STR = 0	# 0
in2_DEL = 0 	# 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xC

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x00 #0x00

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x3 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1


# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc

## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1




[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing


[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1


[Producer.tjmonopix2_AB]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_AB
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1

START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1

[DataCollector.dc_tjmonopix2_AB]
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X
DISABLE_PRINT = 1


[Producer.tjmonopix2_CD]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_CD
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1

START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1


[DataCollector.dc_tjmonopix2_CD]
EUDAQ_MN = monopix2_mon
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X
DISABLE_PRINT = 1



[Producer.elog1]
#start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
#files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
  52   Sat Mar 30 15:39:06 2024 hh, mb, ps1st tests1035TJ-Monopix2800 MeVLow Flux LowProtonUnknown30.03.2024 15:35:0630.03.2024 15:41:336HV  
automatic log for run 1035

All four chips enabled now


Comment:
Attachment 1: tjmonopix2.conf 
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". 
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"


[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 0
HDMI2_clk = 1
HDMI3_clk = 0
HDMI4_clk = 0
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001  #8 coinc1+2
in0_STR = 0	# 0 
in0_DEL = 0	# 18
in1_STR = 0	# 0
in1_DEL = 0	# 18
in2_STR = 0	# 0
in2_DEL = 0 	# 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.012 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0xC

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x00 #0x00

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x3 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1


# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc

## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1




[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing


[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1


[Producer.tjmonopix2_AB]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_AB
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1

START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1

[DataCollector.dc_tjmonopix2_AB]
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X
DISABLE_PRINT = 1


[Producer.tjmonopix2_CD]
# connection to the data collector
EUDAQ_DC = dc_tjmonopix2_CD
ENABLE_BDAQ_RECORD = 1
ENABLE_HITOR = 1

START_ROW = 0
STOP_ROW = 512
START_COLUMN = 448
STOP_COLUMN = 512
WAIT_FOR_FPGA = 1


[DataCollector.dc_tjmonopix2_CD]
EUDAQ_MN = monopix2_mon
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X
DISABLE_PRINT = 1



[Producer.elog1]
#start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
#files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
Goto page Previous  1, 2, 3, 4, 5, 6 ... 9, 10, 11   Next  All
ELOG V3.1.5-fc6679b