ELOG testbeam-MA2024

Home CMS Production Clean room MedAustron HEPHY testbeams old

testbeam-MA2018 testbeam-MA2019 testbeam-MA2020 testbeam-MA2021 testbeam-MA2023 testbeam-MA2024

Testbeams at MedAustron in 2024, Page 10 of 11

Not logged in

Find | Login | Help

New entries since:

Thu Jan 1 01:00:00 1970

Full | Summary | Threaded | Hide attachments

217 Entries

Goto page Previous 1, 2, 3 ... 9, 10, 11 Next All

ID	Date	Author	Subject	Run Number	DUT	Beam Energy	Rate Setting	Particle Type	Data	t-Start	t-Stop	Duration_min	Frontend
37	Sat Mar 30 11:04:10 2024	bp, ci, hh	RD50-MPW4	1022	RD50-MPW4	800 MeV	Low Flux Low	Proton	Good	30.03.2024 11:03:05	30.03.2024 11:06:37	3	Normal
automatic log for run 1022 Comment: changed alignment again
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 511 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 0.92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0x6 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x30 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
36	Sat Mar 30 10:39:45 2024	bp, ci, hh	RD50-MPW4	1021	RD50-MPW4	800 MeV	Low Flux Low	Proton	Good	30.03.2024 10:37:01	30.03.2024 10:42:12	5	Normal
automatic log for run 1021 Comment: no tracker at start of run
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 511 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 0.92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0x6 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x30 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
35	Sat Mar 30 10:34:27 2024	bp, ci, hh	RD50-MPW4	1020	RD50-MPW4	800 MeV	Low Flux Low	Proton	Good	30.03.2024 10:33:01	30.03.2024 10:36:53	3	Normal
automatic log for run 1020 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 511 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 0.92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0x6 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x30 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
34	Sat Mar 30 10:28:42 2024	bp, ci, hh	RD50-MPW4		RD50-MPW4	800 MeV	Low Flux Low	Proton	Good				Normal
tracker FADC down, HV not on earlier, restart happening
33	Sat Mar 30 10:27:56 2024	bp, ci, hh	RD50-MPW4	1019	RD50-MPW4	800 MeV	Low Flux Low	Proton	Crap	30.03.2024 10:28:28	30.03.2024 10:30:22	1	Normal
automatic log for run 1019 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 511 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 0.92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0x6 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x30 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
32	Sat Mar 30 10:25:55 2024	bp, ci, hh	RD50-MPW4	1018	RD50-MPW4	800 MeV	Low Flux Low	Proton	Crap	30.03.2024 10:26:17	30.03.2024 10:28:21	2	Normal
automatic log for run 1018 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 511 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 0.92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0x6 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x30 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
31	Sat Mar 30 10:23:06 2024	bp, ci, hh	RD50-MPW4	1017	RD50-MPW4	800 MeV	Low Flux Low	Proton	Crap	30.03.2024 10:25:09	30.03.2024 10:25:33	0	Normal
automatic log for run 1017 Comment: changed rate to low again, too much "noise" also moved table down and a bit to the left no HV, is crap
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 511 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 0.92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0x6 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x30 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
30	Sat Mar 30 10:23:04 2024	bp, ci, hh	RD50-MPW4		RD50-MPW4	800 MeV	Low Flux Low	Proton	Good				Normal
changed rate to low again, too much "noise" also moved table down and a bit to the left
29	Sat Mar 30 10:10:57 2024	bp, ci, hh	RD50-MPW4	1016	RD50-MPW4	800 MeV	Low Flux Medium	Proton	Good	30.03.2024 10:07:51	30.03.2024 10:13:23	5	Normal
automatic log for run 1016 Comment: changed rate
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 511 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 0.92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0x6 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x30 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
28	Sat Mar 30 10:05:09 2024	bp, ci, hh	RD50-MPW4	1015	RD50-MPW4	800 MeV	Low Flux Medium	Proton	Good	30.03.2024 10:02:17	30.03.2024 10:07:36	5	Normal
automatic log for run 1015 Comment: changed rate
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 511 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 0.92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0x6 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x30 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
27	Sat Mar 30 09:59:40 2024	bp, ci, hh	RD50-MPW4		RD50-MPW4	800 MeV	Low Flux Medium	Proton	Good				Normal
changed rate
26	Sat Mar 30 09:59:25 2024	bp, ci, hh	RD50-MPW4	1014	RD50-MPW4	800 MeV	Low Flux Low	Proton	Good	30.03.2024 09:56:17	30.03.2024 10:01:51	5	Normal
automatic log for run 1014 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 511 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 0.92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0x6 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x30 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
25	Sat Mar 30 09:54:37 2024	bp, ci, hh	RD50-MPW4		RD50-MPW4	800 MeV	Low Flux Low	Proton	Good				Normal
correlations still there after rate change
24	Sat Mar 30 09:53:41 2024	bp, ci, hh	RD50-MPW4	1013	RD50-MPW4	800 MeV	Low Flux Low	Proton	Good	30.03.2024 09:46:27	30.03.2024 09:56:08	9	Normal
automatic log for run 1013 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 511 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 0.92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0x6 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x30 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
23	Sat Mar 30 09:43:29 2024	bp, ci, hh	RD50-MPW4		RD50-MPW4	800 MeV	Low Flux Low	Proton	Good				Normal
max triggerof tracker set to 100
22	Sat Mar 30 09:42:55 2024	bp, ci, hh	RD50-MPW4	1012	RD50-MPW4	800 MeV	Low Flux Low	Proton	Good	30.03.2024 09:39:08	30.03.2024 09:45:21	6	Normal
automatic log for run 1012 Comment: changed rate
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 511 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 0.92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0x6 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x30 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
21	Sat Mar 30 09:36:22 2024	bp, ci, hh	RD50-MPW4	1011	RD50-MPW4	800 MeV	Low Flux Very Low	Proton	Good	30.03.2024 09:30:18	30.03.2024 09:38:48	8	Normal
automatic log for run 1011 Comment: testing new tablealignment
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 511 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 0.92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0x6 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x30 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 10 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
20	Sat Mar 30 09:27:33 2024	bp, ci, hh	RD50-MPW4	1010	RD50-MPW4	800 MeV	Low Flux Very Low	Proton	Crap	30.03.2024 09:23:42	30.03.2024 09:29:59	6	Normal
automatic log for run 1010 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 511 matrix_config = matrix_mpw4.txt #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 0.92 th__i = 3
Attachment 2: matrix_mpw4.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 13 00 01 0 0 0 0 4 00 02 0 0 0 0 9 00 03 0 0 0 0 12 00 04 0 0 0 0 7 00 05 0 0 0 0 10 00 06 0 0 0 0 8 00 07 0 0 0 0 8 00 08 0 0 0 0 8 00 09 0 0 0 0 9 00 10 0 0 0 0 10 00 11 0 0 0 0 5 00 12 0 0 0 0 14 00 13 0 0 0 0 6 00 14 0 0 0 0 7 00 15 0 0 0 0 3 00 16 0 0 0 0 5 00 17 0 0 0 0 15 00 18 0 0 0 0 12 00 19 0 0 0 0 11 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 7 00 23 0 0 0 0 6 00 24 0 0 0 0 10 00 25 0 0 0 0 4 00 26 0 0 0 0 6 00 27 0 0 0 0 0 00 28 0 0 0 0 6 00 29 0 0 0 0 6 00 30 0 0 0 0 11 00 31 0 0 0 0 3 00 32 0 0 0 0 6 00 33 0 0 0 0 8 00 34 0 0 0 0 9 00 35 0 0 0 0 8 00 36 0 0 0 0 11 00 37 0 0 0 0 8 00 38 0 0 0 0 11 00 39 0 0 0 0 8 00 40 0 0 0 0 13 00 41 0 0 0 0 8 00 42 0 0 0 0 7 00 43 0 0 0 0 5 00 44 0 0 0 0 10 00 45 0 0 0 0 14 00 46 0 0 0 0 3 00 47 0 0 0 0 8 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 5 00 51 0 0 0 0 8 00 52 0 0 0 0 11 00 53 0 0 0 0 7 00 54 0 0 0 0 8 00 55 0 0 0 0 10 00 56 0 0 0 0 11 00 57 0 0 0 0 6 00 58 0 0 0 0 11 00 59 0 0 0 0 4 00 60 0 0 0 0 8 00 61 0 0 0 0 5 00 62 1 0 0 0 10 00 63 0 0 0 0 9 01 00 0 0 0 0 15 01 01 0 0 0 0 10 01 02 0 0 0 0 8 01 03 0 0 0 0 7 01 04 0 0 0 0 10 01 05 0 0 0 0 0 01 06 0 0 0 0 10 01 07 0 0 0 0 15 01 08 0 0 0 0 4 01 09 0 0 0 0 13 01 10 0 0 0 0 9 01 11 0 0 0 0 4 01 12 0 0 0 0 12 01 13 0 0 0 0 11 01 14 0 0 0 0 7 01 15 0 0 0 0 2 01 16 0 0 0 0 7 01 17 0 0 0 0 12 01 18 0 0 0 0 6 01 19 0 0 0 0 10 01 20 0 0 0 0 9 01 21 0 0 0 0 13 01 22 0 0 0 0 6 01 23 0 0 0 0 12 01 24 0 0 0 0 5 01 25 0 0 0 0 10 01 26 0 0 0 0 9 01 27 0 0 0 0 9 01 28 0 0 0 0 5 01 29 0 0 0 0 4 01 30 0 0 0 0 9 01 31 0 0 0 0 6 01 32 0 0 0 0 10 01 33 0 0 0 0 5 01 34 1 0 0 0 15 01 35 0 0 0 0 8 01 36 0 0 0 0 4 01 37 0 0 0 0 7 01 38 0 0 0 0 12 01 39 0 0 0 0 8 01 40 0 0 0 0 9 01 41 0 0 0 0 4 01 42 0 0 0 0 12 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 13 01 46 0 0 0 0 12 01 47 0 0 0 0 8 01 48 0 0 0 0 4 01 49 0 0 0 0 10 01 50 0 0 0 0 10 01 51 0 0 0 0 8 01 52 0 0 0 0 10 01 53 0 0 0 0 11 01 54 0 0 0 0 11 01 55 0 0 0 0 4 01 56 0 0 0 0 13 01 57 0 0 0 0 12 01 58 0 0 0 0 4 01 59 0 0 0 0 5 01 60 0 0 0 0 9 01 61 0 0 0 0 7 01 62 0 0 0 0 7 01 63 0 0 0 0 10 02 00 0 0 0 0 6 02 01 0 0 0 0 11 02 02 0 0 0 0 14 02 03 0 0 0 0 8 02 04 0 0 0 0 11 02 05 0 0 0 0 14 02 06 0 0 0 0 11 02 07 0 0 0 0 12 02 08 0 0 0 0 7 02 09 0 0 0 0 10 02 10 0 0 0 0 6 02 11 0 0 0 0 7 02 12 0 0 0 0 9 02 13 0 0 0 0 5 02 14 0 0 0 0 8 02 15 0 0 0 0 6 02 16 0 0 0 0 10 02 17 0 0 0 0 10 02 18 0 0 0 0 10 02 19 0 0 0 0 8 02 20 0 0 0 0 9 02 21 0 0 0 0 7 02 22 0 0 0 0 4 02 23 0 0 0 0 7 02 24 0 0 0 0 12 02 25 0 0 0 0 2 02 26 0 0 0 0 2 02 27 0 0 0 0 9 02 28 0 0 0 0 7 02 29 0 0 0 0 8 02 30 0 0 0 0 9 02 31 0 0 0 0 11 02 32 0 0 0 0 7 02 33 0 0 0 0 9 02 34 0 0 0 0 6 02 35 1 0 0 0 10 02 36 0 0 0 0 10 02 37 0 0 0 0 14 02 38 0 0 0 0 7 02 39 0 0 0 0 7 02 40 0 0 0 0 7 02 41 0 0 0 0 9 02 42 0 0 0 0 6 02 43 0 0 0 0 9 02 44 0 0 0 0 4 02 45 0 0 0 0 10 02 46 0 0 0 0 12 02 47 0 0 0 0 8 02 48 0 0 0 0 5 02 49 0 0 0 0 12 02 50 0 0 0 0 5 02 51 0 0 0 0 9 02 52 0 0 0 0 6 02 53 0 0 0 0 5 02 54 0 0 0 0 6 02 55 0 0 0 0 8 02 56 0 0 0 0 4 02 57 0 0 0 0 7 02 58 0 0 0 0 15 02 59 0 0 0 0 15 02 60 0 0 0 0 8 02 61 0 0 0 0 9 02 62 0 0 0 0 12 02 63 0 0 0 0 8 03 00 0 0 0 0 8 03 01 0 0 0 0 11 03 02 0 0 0 0 5 03 03 0 0 0 0 2 03 04 0 0 0 0 6 03 05 0 0 0 0 9 03 06 0 0 0 0 6 03 07 0 0 0 0 7 03 08 0 0 0 0 8 03 09 0 0 0 0 8 03 10 0 0 0 0 6 03 11 0 0 0 0 5 03 12 0 0 0 0 12 03 13 0 0 0 0 3 03 14 0 0 0 0 9 03 15 0 0 0 0 1 03 16 0 0 0 0 6 03 17 0 0 0 0 13 03 18 0 0 0 0 15 03 19 0 0 0 0 8 03 20 0 0 0 0 8 03 21 0 0 0 0 6 03 22 0 0 0 0 7 03 23 0 0 0 0 8 03 24 0 0 0 0 4 03 25 0 0 0 0 5 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 11 03 29 0 0 0 0 9 03 30 0 0 0 0 6 03 31 0 0 0 0 12 03 32 0 0 0 0 6 03 33 0 0 0 0 6 03 34 0 0 0 0 9 03 35 0 0 0 0 6 03 36 0 0 0 0 10 03 37 0 0 0 0 11 03 38 0 0 0 0 10 03 39 0 0 0 0 10 03 40 0 0 0 0 4 03 41 0 0 0 0 8 03 42 0 0 0 0 12 03 43 0 0 0 0 12 03 44 0 0 0 0 9 03 45 0 0 0 0 12 03 46 0 0 0 0 9 03 47 0 0 0 0 3 03 48 0 0 0 0 9 03 49 0 0 0 0 7 03 50 0 0 0 0 1 03 51 0 0 0 0 8 03 52 0 0 0 0 9 03 53 0 0 0 0 10 03 54 0 0 0 0 4 03 55 0 0 0 0 3 03 56 0 0 0 0 12 03 57 0 0 0 0 5 03 58 0 0 0 0 4 03 59 0 0 0 0 7 03 60 1 0 0 0 8 03 61 0 0 0 0 8 03 62 0 0 0 0 8 03 63 0 0 0 0 1 04 00 0 0 0 0 8 04 01 0 0 0 0 15 04 02 0 0 0 0 12 04 03 0 0 0 0 4 04 04 0 0 0 0 9 04 05 0 0 0 0 11 04 06 0 0 0 0 14 04 07 0 0 0 0 10 04 08 0 0 0 0 4 04 09 0 0 0 0 7 04 10 0 0 0 0 8 04 11 0 0 0 0 11 04 12 0 0 0 0 9 04 13 0 0 0 0 11 04 14 0 0 0 0 7 04 15 0 0 0 0 10 04 16 0 0 0 0 3 04 17 0 0 0 0 10 04 18 0 0 0 0 11 04 19 0 0 0 0 12 04 20 0 0 0 0 10 04 21 0 0 0 0 11 04 22 0 0 0 0 8 04 23 0 0 0 0 11 04 24 0 0 0 0 2 04 25 0 0 0 0 3 04 26 0 0 0 0 9 04 27 0 0 0 0 11 04 28 0 0 0 0 7 04 29 0 0 0 0 4 04 30 0 0 0 0 5 04 31 0 0 0 0 9 04 32 0 0 0 0 4 04 33 0 0 0 0 8 04 34 0 0 0 0 7 04 35 0 0 0 0 3 04 36 0 0 0 0 4 04 37 0 0 0 0 10 ... 3802 more lines ...
Attachment 3: mpw4.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0x6 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x30 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.RD50_MPW4_0] [DataCollector.mpw4_dc] # connection to the monitor EUDAQ_MN = mpw4_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/MPW4/mpw4_run$6R$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 10 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 [Monitor.mpw4_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [Producer.elog1] start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
19	Sat Mar 30 09:25:05 2024	bp, ci, hh	RD50-MPW4		RD50-MPW4	800 MeV	Low Flux Very Low	Proton	Crap				Normal
bea is back
18	Sat Mar 30 09:15:13 2024	bp, ci, hh	RD50-MPW4		RD50-MPW4	800 MeV	Low Flux Very Low	Proton	Crap				Normal
moved entire setup a bit in order too better focus beam on MPW4 (hopefully)

Goto page Previous 1, 2, 3 ... 9, 10, 11 Next All

ELOG V3.1.5-fc6679b