| ID |
Date |
Author |
Subject |
Run Number |
DUT |
Beam Energy |
Rate Setting |
Particle Type |
Events |
Data |
t-Start |
t-Stop |
Duration_min |
Frontend |
Text |
 |
|
64
|
Thu Apr 27 15:49:58 2023 |
Felix Ulrich-Pur | LGAD beam telescope calibration | 011 | | 145.4 | Low Flux Medium | Proton | | Good | | | | | 23.04.23 00:17 trigger on third LGAD
no DUT |
|
|
65
|
Thu Apr 27 15:50:55 2023 |
Felix Ulrich-Pur | LGAD beam telescope calibration | 012 | | 100.4 | Low Flux Medium | Proton | | Good | | | | | 23.04.23 00:35 trigger on third LGAD
no DUT |
|
|
9
|
Sat Feb 18 22:37:45 2023 |
BP_PS | INFO | | common | 800 | 5kHz | Proton | | Unknown | | | | | z positions:
DSSD1: 0mm
DSSD2: 48mm
|
|
|
16
|
Sat Feb 18 23:58:44 2023 |
BP_PS | INFO | | common | 800 | 5kHz | Proton | | Unknown | | | | | Moved DUT 4mm before run 9 |
|
|
34
|
Sun Feb 19 02:05:04 2023 |
BP_PS | INFO | | common | 800 | 5kHz | Proton | | Unknown | | | | | change TH before run 26, chip was getting
noisy to 1,15V
Before it was at 1,08 |
|
|
37
|
Sun Feb 19 02:08:34 2023 |
BP_PS | INFO | | common | 800 | 5kHz | Proton | | Unknown | | | | | TH change again before run 27, new TH= 1.1 |
|
|
5
|
Sat Feb 18 22:18:39 2023 |
BP_PS | Beam | | common | 800 | 5kHz | Proton | | Unknown | | | | | Status 22:19, waiting for beam, vakuum Problem
in der Quelle |
|
|
6
|
Sat Feb 18 22:26:47 2023 |
BP_PS | Beam | | common | 800 | 5kHz | Proton | | Unknown | | | | | Status: Beam bekommen um 22:23 |
|
|
7
|
Sat Feb 18 22:30:02 2023 |
BP_PS | Beam | 2 | common | 800 | 5kHz | Proton | 521924 | Unknown | 18.02.2023 22:23:26 | 18.02.2023 22:30:02 | | | automatic log for run 2 |
|
|
8
|
Sat Feb 18 22:32:10 2023 |
BP_PS | Beam | 3 | common | 800 | 5kHz | Proton | 67592 | Unknown | 18.02.2023 22:31:03 | 18.02.2023 22:32:09 | | | automatic log for run 3 |
|
|
4
|
Sat Feb 18 22:17:31 2023 |
Bernhard Pilsl | Attention RUN NUMBER | | | | | | | | | | | | Due to bug in Elog-RC entries here for
the shift on 18.02.2023 are bigger (+1) than
the one stored in the data file names |
|
|
93
|
Sat May 6 07:49:04 2023 |
cibp | 1st tests | 49 | RD50-MPW3 | 800 | 200kHz | Proton | 692561 | Unknown | 06.05.2023 07:34:20 | 06.05.2023 07:48:13 | | Normal | automatic log for run 49
Comment:
|
|
|
94
|
Sat May 6 08:08:45 2023 |
cibp | 1st tests | 50 | RD50-MPW3 | 800 | 200kHz | Proton | 868396 | Unknown | 06.05.2023 07:51:22 | 06.05.2023 08:07:55 | | Normal | automatic log for run 50
Comment:
testing for the moment
|
|
|
95
|
Sat May 6 08:09:15 2023 |
cibp | 1st tests | | RD50-MPW3 | 800 | 200kHz | Proton | | Unknown | | | | Normal | changed MPX2 trigger veto from 625us -> 100us
veto length |
|
|
96
|
Sat May 6 08:11:28 2023 |
cibp | 1st tests | 51 | RD50-MPW3 | 800 | 200kHz | Proton | 1 | Unknown | 06.05.2023 08:10:26 | 06.05.2023 08:10:38 | | Normal | automatic log for run 51
Comment:
trying to run mpx2 |
|
|
97
|
Sat May 6 08:45:07 2023 |
cibp | 1st tests | 52 | RD50-MPW3 | 800 | 200kHz | Proton | 8992077 | Unknown | 06.05.2023 08:12:31 | 06.05.2023 08:44:16 | | Normal | automatic log for run 52
Comment:
trying to run mpx2 without trigger loss |
|
|
98
|
Sat May 6 08:59:49 2023 |
cibp | 1st tests | 53 | RD50-MPW3 | 800 | 200kHz | Proton | 1 | Unknown | 06.05.2023 08:57:05 | 06.05.2023 08:58:59 | | Normal | automatic log for run 53
Comment:
trying to run mpx2 without trigger loss |
|
|
99
|
Sat May 6 09:02:17 2023 |
cibp | 1st tests | | RD50-MPW3 | 800 | 200kHz | Proton | | Unknown | | | | Normal | moved whole setup by ~2mm in x |
|
|
100
|
Sat May 6 09:04:46 2023 |
cibp | 1st tests | | RD50-MPW3 | 800 | 200kHz | Proton | | Unknown | | | | Normal | apperently wrong direction, adjusting again
moved 2mm (from origin) in other direction |
|
|
101
|
Sat May 6 09:07:40 2023 |
cibp | 1st tests | 54 | RD50-MPW3 | 800 | 200kHz | Proton | 926384 | Unknown | 06.05.2023 09:01:52 | 06.05.2023 09:06:49 | | Normal | automatic log for run 54
Comment:
moved sensors 2mm towards LCR1 (+y for tracker)
|
|