ASIC: TH 1320, noisy pixel masekd
BEAM ON

send to monitor: 10

 

Rate

Start 06:55
reallocated correctly, rate looks similar to old measurements now (kHz ish)

channel 1 : Si upstream
channel 2: SiC downstream

400 V Bias

Referenz: 2.475V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1

position:

x: 0
y: 0 

Start: 07:30
Range Shifter Out, Filter 1 IN, Filter 2 IN
Before the run we went inside to: put scintillators behind the sensors, reset the fpga counters

TB 24.4.21

90deg (0.2-1cmAlu)

TB 19.6.21

Start 17:13

Mean rate O(MHz)
 

Start: 06:54 O(MHz)

Bias voltage Diamond: 500

Bias voltage Si LGAD: -100

From a beam perspective the Diamond detector was the first target, on oscilloscope channel 4, the Si LGAD was the second target connected to oscilloscope channel 1.

Triggering source was the Si LGAD detector.

Data was stored on the HiBPM-Osci-2 NUC under c:\measurements

Fluence loss measurement 11.12.2021

Start 15:15

0deg =1cm Alu

Tracker latency lat=42

RD50-MPW3 monitor connected first

Spotsize

ASIC: TH 1320, noisy pixel masekd
BEAM ON

Warning -> not sure, restart

 

Spotsize

beamtime on 18.09.2021
CH1: SiC
CH3: Si
Bias_Si: -100 V
Bias_SiC: 1100 V
Noise measurement

ASIC: TH 1325, noisy pixel masekd
BEAM ON

send everything to monitor

Spotsize

beamtime on 18.09.2021
CH1: SiC
CH3: Si
Bias_Si: -100 V
Bias_SiC: 1100 V

ASIC: TH 1320, noisy pixel masekd
BEAM ON

send everything to monitor

Spotsize

beamtime on 18.09.2021
CH1: SiC
CH3: Si
Bias_Si: -100 V
Bias_SiC: 800 V