MT=1, BSY=50,
beam  centered (total correction +12.5mm x (to the left in beam direction) and +7.5 mm y (down in beam direction)

rate between 100Hz and 70 kHz, few 100Hz spills
setting IV
 

Start 18:09:
Final MT=1, final BSY length =500 (2kHz), Trigger latency 41 optimal

HV 200V

2er Koinzidenz
Alignment Run SiC -> Crap, FADCs abgeschmiert

MT=1, BSY=50,
beam almost centered (total correction +15mm x (to the left in beam direction) and +7.5 mm y (down in beam direction)

rate between 100Hz and 70 kHz
setting IV
 

Start 17:58:
Final MT=1, final BSY length =500 (2kHz), Trigger latency 41 optimal

HV 300V

2er Koinzidenz
Tracker only, ALIGNMENT
Danach: Umbau auf SiC (Junctionboard geaendert) fuer SiC Alignment

MT=1, BSY=50,
now correct degrader, beam still off
setting IV
 

Start 17:45:
Final MT=1, final BSY length =500 (2kHz), Trigger latency 41 optimal

HV 400V

2er Koinzidenz
Tracker only, Alignment run -> FADC crashed

wrong degrader setting
setting IV
 

Start 17:44:
Final MT=1, final BSY length =500 (2kHz), Trigger latency 41 optimal
accidentally ZS instead of RAW

HV 400V

2er Koinzidenz
Row 3 Col 4
for Beam

MT=1, BSY=50,
rate few 100Hz
x looks off, y centered now (after -0.25cm in y correction)
setting IV
 

Start 17:30:
Final MT=1, final BSY length =500 (2kHz), Trigger latency 41 optimal
accidentally ZS instead of RAW

HV 300V

3er Koinzidenz
Row 3 Col 4
WINDOW RUN
Trigger-Busy + Max Trigger unkown, check in log-file

Rate

Start 07:16
rate looks fine,

channel 1 : Si upstream
channel 2: SiC downstream

400 V Bias

Referenz: 2.475V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1

position:

x: 0
y: 0 

SiC: man sieht erstmals Signale 

Start: 07:42
Range Shifter Out, Filter 1 IN, Filter 2 IN

TB 24.4.21

0deg (1cm Alu)

TB 19.6.21

Start 18:15
Mean rate O(MHz)