Tue Mar 16 15:07:56 2021, Patrick Sieberer, Pad Sensoren, 21, , 100.4, III(EFE+SID2), Proton, , Good, , , , , , , none,
|
Start: 12:41
Range Shifter Out, Filter 1 IN, Filter 2 IN
12:53 went inside to test if sensors are activated |
Tue Mar 16 15:09:04 2021, Patrick Sieberer, Pad Sensoren, 22, , 800, V, Proton, , Good, , , , , , , none,
|
Start: 13:09
Range Shifter Out, Filter 1 IN, Filter 2 IN
Changed compliance values back to 30 uA |
Tue Mar 16 15:09:33 2021, Patrick Sieberer, Pad Sensoren, 23, , 800, VII, Proton, , Good, , , , , , , none,
|
Start: 13:36
Range Shifter Out, Filter 1 IN, Filter 2 IN |
Tue Mar 16 15:10:11 2021, Patrick Sieberer, Pad Sensoren, 24, , 252.7, nominal, Proton, , Good, , , 10, , , , none,
|
Start: 13:57
Range Shifter Out, Filter 1 IN, Filter 2 IN |
Tue Mar 16 15:10:41 2021, Patrick Sieberer, Pad Sensoren, 25, , 252.7, nominal, Proton, , Good, , , 50, , , , none,
|
Start: 14:06
Range Shifter Out, Filter 1 IN, Filter 2 IN |
Tue Mar 16 15:11:00 2021, Patrick Sieberer, Pad Sensoren, 26, , 252.7, nominal, Proton, , Good, , , 100, , , , none,
|
Start: 14:20
Range Shifter Out, Filter 1 IN, Filter 2 IN |
Tue Mar 16 15:11:34 2021, Patrick Sieberer, Pad Sensoren, 27, , 252.7, nominal, Proton, , Good, , , 100, , , , none,
|
Start: 14:28
Range Shifter Out, Filter 1 IN, Filter 2 IN
Power supply of si-sensor went into compliance, therefore the compliance value was set to 100 uA again
Ende 14:35 |
Wed May 12 08:46:41 2021, Felix Ulrich-Pur, Alignment Run, 1, DSSD-Tracker, 252.7, II(BETA+EFE), Proton, , Good, , , , , , , none,
|
TB 24.4.21
Alignment run |
Wed May 12 08:47:53 2021, Felix Ulrich-Pur, Alignment Run, 2, DSSD-Tracker, 252.7, II(BETA+EFE), Proton, , Good, , , , , , , none,
|
TB 24.4.21
Alignment run |
Sun Jun 20 19:26:54 2021, Felix Ulrich-Pur, HADES testrun 800MeV, 1, HADES-LGADs, 800, VII, Proton, , Good, , , , , , , none, 0
|
TB 19.6.21
Start 06:00
startet with wrong setting at the beginning (6 instead of 5) rate was then corrected, but RaMon was still running.
Final rate: 100kHz setting
07:24: room request: changed channel on board (was not connected to osci) |
Sun Jun 20 19:30:28 2021, Felix Ulrich-Pur, HADES testrun 100.4MeV, 2, HADES-LGADs, 100.4, II(BETA+EFE), Proton, , Good, , , , , , , none, 0
|
TB 19.6.21
Start 07:51
beam was paused at 10:10
bias run and threshold optimization
mean rate was O(100kHz) |
Sun Jun 20 19:33:06 2021, Felix Ulrich-Pur, HADES testrun with increased rate 100.4MeV, 3, HADES-LGADs, 100.4, I(EFE+SID0), Proton, , Good, , , , , , , none, 0
|
TB 19.6.21
Start 11:21
paused beam at 13:36
15:40-16:20 ECR source fail--downtime
Mean rate O(MHz) |
Sun Jun 20 19:34:59 2021, Felix Ulrich-Pur, HADES energy run, 4, HADES-LGADs, 252.7, I(EFE+SID0), Proton, , Good, , , , , , , none, 0
|
TB 19.6.21
Start 17:13
Mean rate O(MHz)
|
Sun Jun 20 19:35:46 2021, Felix Ulrich-Pur, HADES energy run, 5, HADES-LGADs, 194.3, I(EFE+SID0), Proton, , Good, , , , , , , none, 0
|
TB 19.6.21
Start 17:42
Mean rate O(MHz)
|
Sun Jun 20 19:37:09 2021, Felix Ulrich-Pur, HADES energy run, 6, HADES-LGADs, 145.4, I(EFE+SID0), Proton, , Good, , , , , , , none, 0
|
TB 19.6.21
Start 18:15
Mean rate O(MHz)
|
Sun Jun 20 19:37:37 2021, Felix Ulrich-Pur, HADES energy run, 7, HADES-LGADs, 83, I(EFE+SID0), Proton, , Good, , , , , , , none, 0
|
TB 19.6.21
Start 18:48
Mean rate O(MHz)
|
Sun Jun 20 19:37:58 2021, Felix Ulrich-Pur, HADES energy run, 8, HADES-LGADs, 62.4, I(EFE+SID0), Proton, , Good, , , , , , , none, 0
|
TB 19.6.21
Start 19:16
Mean rate O(MHz)
|
Sun Jun 20 19:38:28 2021, Felix Ulrich-Pur, HADES increased rate run (wrong setting, 9, HADES-LGADs, 800, VII, Proton, , Good, , , 20, , , , none, 0
|
TB 19.6.21
Start 19:43
rate setting was not set correctly deg20 in combination with setting VII instead of nominal flux deg10
|
Sun Jun 20 19:40:12 2021, Felix Ulrich-Pur, HADES increased rate , 10, HADES-LGADs, 800, nominal, Proton, , Good, , , 10, , , , none, 0
|
TB 19.6.21
Start 21:50
Nominal flux degrader 10: mean rate O(200MHz)
|
Sun Jun 20 19:55:47 2021, Felix Ulrich-Pur, HADES sandwich TOF reference run, 12, HADES-LGADs, 100.4, I(EFE+SID0), Proton, , Good, , , , , , , none, 0
|
TB 20.6.21
Start 16:46
0cm Phantom thickness
Mean rate O(MHz)
reference run without phantom
for live TOF estimation: TDC3,channel 9 - TDC2,channel9
|
|