| ID |
Date |
Author |
Subject |
Run Number |
DUT |
Beam Energy |
Rate Setting |
Particle Type |
Events |
Data |
Beam Betatron |
Beam Chopper |
Beam Degrader |
Beam EFE |
Beam Orb |
Beam QuadScan |
PhantomType |
PhantomAngle |
|
166
|
Tue Mar 16 15:07:56 2021 |
Patrick Sieberer | Pad Sensoren | 21 | | 100.4 | III(EFE+SID2) | Proton | | Good | | | | | | | none | |
Start: 12:41
Range Shifter Out, Filter 1 IN, Filter 2 IN
12:53 went inside to test if sensors are activated |
|
167
|
Tue Mar 16 15:09:04 2021 |
Patrick Sieberer | Pad Sensoren | 22 | | 800 | V | Proton | | Good | | | | | | | none | |
Start: 13:09
Range Shifter Out, Filter 1 IN, Filter 2 IN
Changed compliance values back to 30 uA |
|
168
|
Tue Mar 16 15:09:33 2021 |
Patrick Sieberer | Pad Sensoren | 23 | | 800 | VII | Proton | | Good | | | | | | | none | |
Start: 13:36
Range Shifter Out, Filter 1 IN, Filter 2 IN |
|
169
|
Tue Mar 16 15:10:11 2021 |
Patrick Sieberer | Pad Sensoren | 24 | | 252.7 | nominal | Proton | | Good | | | 10 | | | | none | |
Start: 13:57
Range Shifter Out, Filter 1 IN, Filter 2 IN |
|
170
|
Tue Mar 16 15:10:41 2021 |
Patrick Sieberer | Pad Sensoren | 25 | | 252.7 | nominal | Proton | | Good | | | 50 | | | | none | |
Start: 14:06
Range Shifter Out, Filter 1 IN, Filter 2 IN |
|
171
|
Tue Mar 16 15:11:00 2021 |
Patrick Sieberer | Pad Sensoren | 26 | | 252.7 | nominal | Proton | | Good | | | 100 | | | | none | |
Start: 14:20
Range Shifter Out, Filter 1 IN, Filter 2 IN |
|
172
|
Tue Mar 16 15:11:34 2021 |
Patrick Sieberer | Pad Sensoren | 27 | | 252.7 | nominal | Proton | | Good | | | 100 | | | | none | |
Start: 14:28
Range Shifter Out, Filter 1 IN, Filter 2 IN
Power supply of si-sensor went into compliance, therefore the compliance value was set to 100 uA again
Ende 14:35 |
|
215
|
Wed May 12 08:46:41 2021 |
Felix Ulrich-Pur | Alignment Run | 1 | DSSD-Tracker | 252.7 | II(BETA+EFE) | Proton | | Good | | | | | | | none | |
TB 24.4.21
Alignment run |
|
216
|
Wed May 12 08:47:53 2021 |
Felix Ulrich-Pur | Alignment Run | 2 | DSSD-Tracker | 252.7 | II(BETA+EFE) | Proton | | Good | | | | | | | none | |
TB 24.4.21
Alignment run |
|
227
|
Sun Jun 20 19:26:54 2021 |
Felix Ulrich-Pur | HADES testrun 800MeV | 1 | HADES-LGADs | 800 | VII | Proton | | Good | | | | | | | none | 0 |
TB 19.6.21
Start 06:00
startet with wrong setting at the beginning (6 instead of 5) rate was then corrected, but RaMon was still running.
Final rate: 100kHz setting
07:24: room request: changed channel on board (was not connected to osci) |
|
228
|
Sun Jun 20 19:30:28 2021 |
Felix Ulrich-Pur | HADES testrun 100.4MeV | 2 | HADES-LGADs | 100.4 | II(BETA+EFE) | Proton | | Good | | | | | | | none | 0 |
TB 19.6.21
Start 07:51
beam was paused at 10:10
bias run and threshold optimization
mean rate was O(100kHz) |
|
229
|
Sun Jun 20 19:33:06 2021 |
Felix Ulrich-Pur | HADES testrun with increased rate 100.4MeV | 3 | HADES-LGADs | 100.4 | I(EFE+SID0) | Proton | | Good | | | | | | | none | 0 |
TB 19.6.21
Start 11:21
paused beam at 13:36
15:40-16:20 ECR source fail--downtime
Mean rate O(MHz) |
|
230
|
Sun Jun 20 19:34:59 2021 |
Felix Ulrich-Pur | HADES energy run | 4 | HADES-LGADs | 252.7 | I(EFE+SID0) | Proton | | Good | | | | | | | none | 0 |
TB 19.6.21
Start 17:13
Mean rate O(MHz)
|
|
231
|
Sun Jun 20 19:35:46 2021 |
Felix Ulrich-Pur | HADES energy run | 5 | HADES-LGADs | 194.3 | I(EFE+SID0) | Proton | | Good | | | | | | | none | 0 |
TB 19.6.21
Start 17:42
Mean rate O(MHz)
|
|
232
|
Sun Jun 20 19:37:09 2021 |
Felix Ulrich-Pur | HADES energy run | 6 | HADES-LGADs | 145.4 | I(EFE+SID0) | Proton | | Good | | | | | | | none | 0 |
TB 19.6.21
Start 18:15
Mean rate O(MHz)
|
|
233
|
Sun Jun 20 19:37:37 2021 |
Felix Ulrich-Pur | HADES energy run | 7 | HADES-LGADs | 83 | I(EFE+SID0) | Proton | | Good | | | | | | | none | 0 |
TB 19.6.21
Start 18:48
Mean rate O(MHz)
|
|
234
|
Sun Jun 20 19:37:58 2021 |
Felix Ulrich-Pur | HADES energy run | 8 | HADES-LGADs | 62.4 | I(EFE+SID0) | Proton | | Good | | | | | | | none | 0 |
TB 19.6.21
Start 19:16
Mean rate O(MHz)
|
|
235
|
Sun Jun 20 19:38:28 2021 |
Felix Ulrich-Pur | HADES increased rate run (wrong setting | 9 | HADES-LGADs | 800 | VII | Proton | | Good | | | 20 | | | | none | 0 |
TB 19.6.21
Start 19:43
rate setting was not set correctly deg20 in combination with setting VII instead of nominal flux deg10
|
|
236
|
Sun Jun 20 19:40:12 2021 |
Felix Ulrich-Pur | HADES increased rate | 10 | HADES-LGADs | 800 | nominal | Proton | | Good | | | 10 | | | | none | 0 |
TB 19.6.21
Start 21:50
Nominal flux degrader 10: mean rate O(200MHz)
|
|
239
|
Sun Jun 20 19:55:47 2021 |
Felix Ulrich-Pur | HADES sandwich TOF reference run | 12 | HADES-LGADs | 100.4 | I(EFE+SID0) | Proton | | Good | | | | | | | none | 0 |
TB 20.6.21
Start 16:46
0cm Phantom thickness
Mean rate O(MHz)
reference run without phantom
for live TOF estimation: TDC3,channel 9 - TDC2,channel9
|