MT=1, BSY=50, x is centered now, y looks 0.25cm off setting IV
MT=1, BSY=50, rate few 100Hz x looks off, y centered now (after -0.25cm in y correction) setting IV
wrong degrader setting setting IV
MT=1, BSY=50, beam almost centered (total correction +15mm x (to the left in beam direction) and +7.5 mm y (down in beam direction)
rate between 100Hz and 70 kHz setting IV
MT=1, BSY=50, beam centered (total correction +12.5mm x (to the left in beam direction) and +7.5 mm y (down in beam direction)
rate between 100Hz and 70 kHz, few 100Hz spills setting IV
MT=1, BSY=50, now correct degrader, beam still off setting IV
MT=1, BSY=50, setting IV
Rate,15s spill pause, delay can be set by operator
Rate
Rate, up till now looks like the same
Rate, factor 10 too high, role ~30kHz instead of 3kHz, Beta nominal
Rate, Beta nominal, factor 10 too high
Rate, Beta 10% nominal, now 3kHz
Rate, Beta 10% nominal
Rate, now Beta 10%