 Wed May 12 08:53:46 2021, Felix Ulrich-Pur, PMMA 90deg, 11, Drehtisch, 100.4, II(BETA+EFE), Proton, , Good, , , , , , , PMMA, 90
|
TB 24.4.21
90deg (0.2-1cm PMMA) |
|
Wed May 12 08:54:54 2021, Felix Ulrich-Pur, PMMA 0deg, 12, Drehtisch, 100.4, II(BETA+EFE), Proton, , Good, , , , , , , PMMA, 0
|
TB 24.4.21
0deg (1cm PMMA) |
|
Wed May 12 08:56:02 2021, Felix Ulrich-Pur, ABS 0deg, 13, Drehtisch, 145.4, II(BETA+EFE), Proton, , Good, , , , , , , ABS, 0
|
TB 24.4.21
0deg (1cm ABS) |
|
Wed May 12 08:56:37 2021, Felix Ulrich-Pur, ABS 0deg fluence loss, 15, Drehtisch, 145.4, II(BETA+EFE), Proton, , Good, , , , , , , ABS, 0
|
TB 24.4.21
corrected trigger position for fluence loss radiography
0deg (1cm ABS) |
|
Sun Nov 7 19:11:24 2021, Felix Ulrich-Pur, Fluence loss meas 7.11.21, 26, Drehtisch, 145.4, II(BETA+EFE), Proton, 60e6, Good, , , , , , , Alu, 0
|
Start: 15:19
1 cm Alu stair phantom on rotary table (0deg--> always 1cm Al in beam) |
|
Sun Nov 7 19:12:57 2021, Felix Ulrich-Pur, Fluence loss meas 7.11.21, 27, Drehtisch, 145.4, II(BETA+EFE), Proton, 60e6, Good, , , , , , , Alu, 90
|
Start: 16:40
1 cm Alu stair phantom on rotary table (90deg--> 0.2-1cm Alu) |
|
Sun Nov 7 19:13:36 2021, Felix Ulrich-Pur, Fluence loss meas 7.11.21, 28, Drehtisch, 100.4, II(BETA+EFE), Proton, 60e6, Good, , , , , , , Alu, 90
|
Start: 18:00
1 cm Alu stair phantom on rotary table (90deg) |
|
Sun Nov 7 19:28:49 2021, Felix Ulrich-Pur, Fluence loss meas 7.11.21, 29, Drehtisch, 100.4, II(BETA+EFE), Proton, 60e6, Good, , , , , , , Alu, 0
|
Start: 19:28
1 cm Alu stair phantom on rotary table (0deg) |
|
Sun Nov 21 14:53:00 2021, Simon Waid, Comparison SiC, Si, Si LGAD and Diamond, 4, Diamond+LGAD, 62.4, I(EFE+SID0), Proton, 100000, , , , , , , , ,
|
Bias voltage Diamond: 500
Bias voltage Si LGAD: -100
From a beam perspective the Diamond detector was the first target, on oscilloscope channel 4, the Si LGAD was the second target connected to oscilloscope channel 1.
Triggering source was the Si LGAD detector.
Data was stored on the HiBPM-Osci-2 NUC under c:\measurements |
|
Wed May 12 08:46:41 2021, Felix Ulrich-Pur, Alignment Run, 1, DSSD-Tracker, 252.7, II(BETA+EFE), Proton, , Good, , , , , , , none,
|
TB 24.4.21
Alignment run |
|
Wed May 12 08:47:53 2021, Felix Ulrich-Pur, Alignment Run, 2, DSSD-Tracker, 252.7, II(BETA+EFE), Proton, , Good, , , , , , , none,
|
TB 24.4.21
Alignment run |
|
Sat Dec 11 17:46:17 2021, Felix Ulrich-Pur, Alignment run, 1, DSSD-Tracker, 800, V, Proton, , Good, , , , , , , none,
|
Fluence loss measurement 11.12.2021
Start 14:45
|
|
Sat Dec 11 17:47:45 2021, Felix Ulrich-Pur, Alignment run, 2, DSSD-Tracker, 800, V, Proton, , Good, , , , , , , none,
|
Fluence loss measurement 11.12.2021
|
|
Sat Dec 11 17:47:52 2021, Felix Ulrich-Pur, Alignment run, 3, DSSD-Tracker, 800, V, Proton, , Good, , , , , , , none,
|
Fluence loss measurement 11.12.2021
|
|
Sat Dec 11 17:48:08 2021, Felix Ulrich-Pur, Fluence loss 1cm, 4, DSSD-Tracker, 800, V, Proton, , Good, , , , , , , Alu, 0 deg
|
Fluence loss measurement 11.12.2021
Start 15:15
0deg =1cm Alu |
|
Sat Dec 11 18:19:56 2021, Felix Ulrich-Pur, Fluence loss 1cm, 5, DSSD-Tracker, 800, V, Proton, , Good, , , , , , , Alu, 0 deg
|
Fluence loss measurement 11.12.2021
Start 18:17
90deg = all five steps Alu |
|
Tue Mar 16 14:51:53 2021, Patrick Sieberer, Pad Sensoren, 1, , 62.4, III(EFE+SID2), Proton, , Unknown, , , , , , , none,
|
Start: 06:38
Range Shifter Out, Filter 1 IN, Filter 2 IN
Scintillators in front |
|
Tue Mar 16 14:54:07 2021, Patrick Sieberer, Pad Sensoren, 2, , 145.4, III(EFE+SID2), Proton, , Good, , , , , , , none,
|
Start: 06:45
Range Shifter Out, Filter 1 IN, Filter 2 IN
Scintillators in front |
|
Tue Mar 16 14:54:40 2021, Patrick Sieberer, Pad Sensoren, 3, , 252.7, III(EFE+SID2), Proton, , Good, , , , , , , none,
|
Start: 07:00
Range Shifter Out, Filter 1 IN, Filter 2 IN
Scintillators in front |
|
Tue Mar 16 14:55:06 2021, Patrick Sieberer, Pad Sensoren, 4, , 252.7, III(EFE+SID2), Proton, , Good, , , , , , , none,
|
Start: 07:30
Range Shifter Out, Filter 1 IN, Filter 2 IN
Before the run we went inside to: put scintillators behind the sensors, reset the fpga counters |
|