Fri Oct 25 18:33:22 2019, Alexander Burker, 2019-10-20 Low Flux, , 145.4, EFE, QuadScan SID2, 13, 77148, none,
|
09:55
one scinti0 looks noisy
|
Fri Oct 25 18:34:26 2019, Alexander Burker, 2019-10-20 Low Flux, , 145.4, EFE, QuadScan SID2, 14, , none,
|
10:00
scinti0 threshold 25 instead of 20, noise better |
Fri Oct 25 18:34:34 2019, Alexander Burker, 2019-10-20 Low Flux, , 145.4, EFE, QuadScan SID2, 15, , none,
|
10:03
scinti0 threshold 30 instead of 20, signal same for both scintis, noise didnt change rate much, other scinti was stable at 20mV threshold
|
Fri Oct 25 18:34:51 2019, Alexander Burker, 2019-10-20 Low Flux, , 252.7, Degrader 10, 16, 567296, none,
|
10:25
change position of lgad form +125 step to 0(isocentre) in 25stepsized steps
|
Fri Oct 25 18:35:17 2019, Alexander Burker, 2019-10-20 Low Flux, , 252.7, Degrader 10, 17, 474112, none,
|
10:45 Room request changed osci from remote to hd camera
11:00 same setting as with run 16, but in centre
|
Fri Oct 25 18:35:47 2019, Alexander Burker, 2019-10-20 Low Flux, , 252.7, Degrader 10, 18, 507392, none,
|
11:22 same as 17
|
Fri Oct 25 18:36:01 2019, Alexander Burker, 2019-10-20 Low Flux, , 252.7, Degrader 10, 19, 363008, none,
|
11:40 same as 17, flo changed bias in lgads
|
Fri Oct 25 18:36:21 2019, Alexander Burker, 2019-10-20 Low Flux, , 145.4, Degrader 10, 20, 304640, none,
|
12:06 medical
|
Fri Oct 25 18:36:52 2019, Alexander Burker, 2019-10-20 Low Flux, , 145.4, Degrader 20, 21, 162816, none,
|
12:20 medical
|
Fri Oct 25 18:40:03 2019, Alexander Burker, 2019-10-20 Low Flux, , 145.4, Degrader 50, 22, 235520, none,
|
12:30 medical
|
Fri Oct 25 18:40:33 2019, Alexander Burker, 2019-10-20 Low Flux, , 100.4, Degrader 10, 23, 343040, none,
|
12:43
|
Fri Oct 25 18:41:09 2019, Alexander Burker, 2019-10-20 Low Flux, , 100.4, Degrader 20, 24, 185344, none,
|
13:00
|
Fri Oct 25 18:41:36 2019, Alexander Burker, 2019-10-20 Low Flux, , 252.7, Degrader 20, 25, 271872, none,
|
13:10
|
Fri Oct 25 18:42:39 2019, Alexander Burker, 2019-10-20 Low Flux, , 252.7, Degrader 50, 26, 163328, none,
|
13:24
|
Fri Oct 25 18:43:09 2019, Alexander Burker, 2019-10-20 Low Flux, , 800, Setting Nr 1, 27, 31771, none,
|
13:40 lots of empty spills
|
Fri Oct 25 18:44:07 2019, Alexander Burker, 2019-10-20 Low Flux, , 800, Setting Nr 4, 28, 11442, none,
|
13:52
|
Fri Oct 25 18:45:20 2019, Alexander Burker, 2019-10-20 Low Flux, , , , 29, 22002, none,
|
|
Fri Oct 25 18:50:08 2019, Alexander Burker, 2019-10-20 Low Flux, Sketch, , , , , ,
|
Spot Sizes Table: SpotsForBeamSettings.csv
Empirics, such as P2, P25, Median, P75 and P98 were obtained directly from the data. These may not be accurate if the beam is larger than the sensor.
To better describe these cases, fit values were obtained with a curve fit to a normal distribution. This can also be inaccurate, as many beam settings aren't normal and the automatic fit might have failed. A goodness-of-fit will be added to each row in the distant future |
Sat Jul 13 13:32:30 2019, Thomas Bergauer, 2019-07-13f proton CT, DSSD-Tracker, , EFE, QuadScan SID2, 1, , none,
|
Trigger: Coincidence using Scintillators
timing setting 41 (*32ns)
using 16ns cables from our scintialltors to TLU |
Sat Jul 13 13:43:06 2019, Alexander Burker, 2019-07-13f proton CT, DSSD-Tracker, 252.7, EFE, QuadScan SID2, 2, 12886, none, none
|
Trigger: Coincidence using MaltaPix
timing setting 43
|
|