09:55
one scinti0 looks noisy

10:00
scinti0 threshold 25 instead of 20, noise better

10:03
scinti0 threshold 30 instead of 20, signal same for both scintis, noise didnt change rate much, other scinti was stable at 20mV threshold
 

10:25
change position of lgad form +125 step to 0(isocentre) in 25stepsized steps

10:45 Room request changed osci from remote to hd camera

11:00 same setting as with run 16, but in centre

11:22  same as 17

11:40 same as 17, flo changed bias in lgads

12:06 medical

12:20 medical

12:30 medical

12:43 

13:00

13:10

13:24

13:40 lots of empty spills

13:52

Spot Sizes Table: SpotsForBeamSettings.csv

Empirics, such as P2, P25, Median, P75 and P98 were obtained directly from the data. These may not be accurate if the beam is larger than the sensor.

To better describe these cases, fit values were obtained with a curve fit to a normal distribution. This can also be inaccurate, as many beam settings aren't normal and the automatic fit might have failed. A goodness-of-fit will be added to each row in the distant future

Trigger: Coincidence using Scintillators

timing setting 41 (*32ns)

using 16ns cables from our scintialltors to TLU

Trigger: Coincidence using MaltaPix

timing setting 43