Mon Nov 30 15:18:12 2015, Hao Yin, Belle II, module, ADC_DELAY_HOT, ADC delay hot
|
ADC delay scan at room temp and 20 min after APV I2C config.
measured values at display in the FIR_HOT cfg file.
17:06 first run 20 min after i2c config. |
Mon Nov 30 17:11:17 2015, Hao Yin, Belle II, module, FIRRun001, FIRRun001 aft ADC_HOT
|
FirRun 20 min after I2C |
Mon Nov 30 17:13:47 2015, Hao Yin, Belle II, system, PedestalRun,
|
ADC Hot, FIRRun001
room temp pedrun |
Mon Nov 30 17:23:51 2015, Hao Yin, Belle II, system, HardwareRun001, ![Room_bw_n.png Room_bw_n.png](attachment.png)
|
ADC Hot, FIRRun001, PedestalRun001
room temp pedrun
target: BW |
Mon Nov 30 17:47:54 2015, Hao Yin, Belle II, system, HardwareRun002, ![Room_-z_n.png Room_-z_n.png](attachment.png)
|
ADC Hot, FIRRun001, PedestalRun001
target: -Z
room temp pedrun
|
Mon Nov 30 18:32:13 2015, Hao Yin, Belle II, system, ADC Delay Scan Cold,
|
ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns) |
Mon Nov 30 18:44:04 2015, Hao Yin, Belle II, system, FIRRun_Cold,
|
ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns)
|
Mon Nov 30 18:45:49 2015, Hao Yin, Belle II, system, PedestalRun_Cold,
|
ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001
|
Mon Nov 30 18:49:23 2015, Hao Yin, Belle II, system, Hardware_Cold, ![Cold_-z_n.png Cold_-z_n.png](attachment.png)
|
ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001
target: -Z
|
Mon Nov 30 19:01:54 2015, Hao Yin, Belle II, system, Hardware_Cold, ![Cold_ce_n.png Cold_ce_n.png](attachment.png)
|
ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001
Temp = 0°C
target: CE
|
Mon Nov 30 19:48:05 2015, Hao Yin, Belle II, system, Hardware_Room_With_Cold_I2C, ![RoomTemp_with_cold_config_ce_p.png RoomTemp_with_cold_config_ce_p.png](attachment.png)
|
ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001
with room temp i2c config
Temp = 0°C
target: CE
|
Mon Nov 30 20:06:15 2015, Hao Yin, Belle II, system, Hardware_Room_With_Cold_I2C, ![RoomTemp_with_cold_config_-z_p.png RoomTemp_with_cold_config_-z_p.png](attachment.png)
|
ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001
with room temp i2c config
Temp = room
target: -Z
|
Mon Nov 30 20:16:37 2015, Hao Yin, Belle II, system, Hardware_Room_With_Cold_I2C, ![RoomTemp_with_cold_config_-z_p_3.png RoomTemp_with_cold_config_-z_p_3.png](attachment.png)
|
ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001
ADC delay shifted by 3 (1.5ns) all sensors
with room temp i2c config
Temp = room
target: -Z
|
Mon Nov 30 20:27:42 2015, Hao Yin, Belle II, system, Hardware_Room_With_Cold_I2C, ![RoomTemp_with_cold_config_-z_p_5.png RoomTemp_with_cold_config_-z_p_5.png](attachment.png)
|
ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001
ADC shifted by 5 (2.5ns) all sensors
with room temp i2c config
Temp = room
target: -Z
Note : n-side (strip nr 200 - 220 shadowhits) |
Mon Nov 30 22:35:41 2015, Hao Yin, Belle II, system, Hardware_Room_With_Cold_I2C, ![RoomTemp_with_cold_config_-z_p_9.png RoomTemp_with_cold_config_-z_p_9.png](attachment.png)
|
ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001
ADC shifted by 9 (4.5ns) all sensors
with room temp i2c config
Temp = room
target: -Z |
Wed Oct 7 14:23:35 2009, Dieter Uhl, BELLE Upgrade, hybrid, #4, hybrid-pitchadapter ![pitchadapter4_lower_coat.gif pitchadapter4_lower_coat.gif](attachment.png) ![pitchadapter4_lower_coat_opens.gif pitchadapter4_lower_coat_opens.gif](attachment.png) ![pitchadapter4_upper_coat.gif pitchadapter4_upper_coat.gif](attachment.png)
|
opens at upper coat
![pitchadapter4_upper_coat_opens.gif](091007_141951/pitchadapter4_upper_coat_opens.gif?lb=electronics2&thumb=1)
shorts at upper coat
![pitchadapter4_upper_coat.gif](091007_141944/pitchadapter4_upper_coat.gif?lb=electronics2&thumb=1)
opens at lower coat
![pitchadapter4_lower_coat_opens.gif](091007_141938/pitchadapter4_lower_coat_opens.gif?lb=electronics2&thumb=1)
shorts at lower coat
![pitchadapter4_lower_coat.gif](091007_141925/pitchadapter4_lower_coat.gif?lb=electronics2&thumb=1)
|
Wed Oct 7 14:24:06 2009, Dieter Uhl, BELLE Upgrade, hybrid, #5, hybrid-pitchadapter ![pitchadapter5_lower_coat_opens.gif pitchadapter5_lower_coat_opens.gif](attachment.png) ![pitchadapter5_lower_coat.gif pitchadapter5_lower_coat.gif](attachment.png) ![pitchadapter5_upper_coat_opens.gif pitchadapter5_upper_coat_opens.gif](attachment.png)
|
shorts at upper coat
![pitchadapter5_upper_coat.gif](091007_142543/pitchadapter5_upper_coat.gif?lb=electronics2&thumb=1)
opens at upper coat
![pitchadapter5_upper_coat_opens.gif](091007_142522/pitchadapter5_upper_coat_opens.gif?lb=electronics2&thumb=1)
shorts at lower coat
![pitchadapter5_lower_coat.gif](091007_142502/pitchadapter5_lower_coat.gif?lb=electronics2&thumb=1)
opens at lower coat
![pitchadapter5_lower_coat_opens.gif](091007_142439/pitchadapter5_lower_coat_opens.gif?lb=electronics2&thumb=1)
|
Wed Apr 23 13:05:05 2008, Christian Irmler, SPS Testbeam June08, source, hybrid 01, time correlation between TDC and sensor measurement -> 3.1 ns RMS
|
|
Wed May 7 15:24:49 2008, Christian Irmler, SPS Testbeam June08, module, module 10/02, properties (noise, intcal), APVs bonded to the sensor 12x
|
Module tested with 1 and 2 rows bonded to the sensor, respectively.
HV = 100 V
Ibias (100V) = 19.1 nA
Ibias (200V) = 23.7 nA |
Wed May 7 15:26:24 2008, Christian Irmler, SPS Testbeam June08, module, module 20/09, properties (noise, intcal), APVs bonded to the sensor 12x
|
Module tested with 1 and 2 rows bonded to the sensor, respectively.
HV = 100 V
Ibias (100 V) = 25.1 nA
Ibias (200 V) = 31.4 nA |
|