Home CMS Production Clean room MedAustron HEPHY testbeams old
testbeam-RD50-DESY-Jul2023 testbeam-RD50-CERN-Oct2022 testbeam-DESY-Oct2017 testbeam-DESY-April2017 testbeam-SPS2015 testbeam-SPS2014 testbeam-DESY14 testbeam-SPS12 testbeam-SPS11 testbeam-SPS10 testbeam-SPS09 testbeam-SPS08 LP-TPC
  Belle testbeam at SPS in June 2015, Page 4 of 6  Not logged in ELOG logo
New entries since:Thu Jan 1 01:00:00 1970
ID Date Author Project Subject Run Number Eventsup XYPosition Cooling Data
  44   Sun Jun 7 23:09:29 2015 Hao YinBelle II FADC (H6A)Hardware014224k  Good

cooled (see attachment) in - 20,5 out -7,8

FIRRun002, PedestalRun006

target: fw, pos 4

Attachment 1: Pos4.png
Pos4.png
  104   Sat Jun 13 17:05:35 2015 Benedikt WürknerSVD3 (H6B)L3 with FEI484300001NoGood

L3 sensor at position x: 105, y: 47 hitting apvs: 2&3 on p-side and apv 3 on n-side

Attachment 1: Telescope_with_L3.png
Telescope_with_L3.png
  31   Sun Jun 7 12:11:42 2015 Benedikt WürknerSVD3 (H6B)Telescope Threshold7 test run 004738175  Unknown

Telescope alone

  46   Mon Jun 8 01:28:58 2015 Benedikt WürknerSVD3 (H6B)hardware run with TLU and Telescopehw0554100007NoGood

RUN WITH SVD3 plus telescope

EUDET Run 55

Mimosa Threshold 6

Pos 7: x= 30.5 mm, y= 79 mm (wide side center)

  61   Mon Jun 8 22:11:07 2015 Benedikt WürknerSVD3 (H6B)Hardware FEI4634900004NoUnknown

RUN WITH SVD3, telescope and FEI4

EUDET Run 63

Mimosa Threshold 6

Pos 4: x=130.7 mm, y=84 mm

  21   Sat Jun 6 16:17:52 2015 Benedikt WürknerSVD3 (H6B)hardware runhw0025000  Good

Table: 100:70

Bias: +-50V

Run to confirm trigger delay

  6   Thu Jun 4 15:12:41 2015 Hao YinBelle II FADC (H6A)Hardware001500001NoGood

PedestalRun001, FIRRun001, room temp
telescope n-side switched.
In order to correct the position change the

Attachment 1: BW_p-side_001Result.pdf
Attachment 2: BW_n-side_001Result.pdf
Attachment 3: L6_p-side_001ModProp.pdf
Attachment 4: L6_n-side_001ModProp.pdf
Attachment 5: L6_p-side_001Result.pdf
Attachment 6: L5_p-side_001ModProp.pdf
Attachment 7: L6_n-side_001Result.pdf
Attachment 8: L5_n-side_001ModProp.pdf
Attachment 9: L5_p-side_001Result.pdf
Attachment 10: L3_p-side_001ModProp.pdf
Attachment 11: L5_n-side_001Result.pdf
Attachment 12: L3_p-side_001Result.pdf
Attachment 13: L3_n-side_001ModProp.pdf
Attachment 14: L3_n-side_001Result.pdf
Attachment 15: L4_p-side_001ModProp.pdf
Attachment 16: L4_n-side_001ModProp.pdf
Attachment 17: L4_p-side_001Result.pdf
Attachment 18: L4_n-side_001Result.pdf
Attachment 19: BW_p-side_001ModProp.pdf
Attachment 20: BW_n-side_001ModProp.pdf
  7   Thu Jun 4 18:44:50 2015 Hao YinBelle II FADC (H6A)Hardware002500002NoGood

room temp, FIRRun001, pedestal run 003

Attachment 1: -Z_p-side_002ModProp.pdf
Attachment 2: -Z_n-side_002ModProp.pdf
Attachment 3: -Z_p-side_002Result.pdf
Attachment 4: L6_p-side_002ModProp.pdf
Attachment 5: -Z_n-side_002Result.pdf
Attachment 6: L6_n-side_002ModProp.pdf
Attachment 7: L6_p-side_002Result.pdf
Attachment 8: L5_p-side_002ModProp.pdf
Attachment 9: L6_n-side_002Result.pdf
Attachment 10: L5_n-side_002ModProp.pdf
Attachment 11: L5_p-side_002Result.pdf
Attachment 12: L3_p-side_002ModProp.pdf
Attachment 13: L5_n-side_002Result.pdf
Attachment 14: L3_n-side_002ModProp.pdf
Attachment 15: L3_p-side_002Result.pdf
Attachment 16: L3_n-side_002Result.pdf
Attachment 17: L4_p-side_002ModProp.pdf
Attachment 18: L4_n-side_002ModProp.pdf
Attachment 19: L4_p-side_002Result.pdf
  11   Fri Jun 5 08:20:27 2015 Hao YinBelle II FADC (H6A)Hardware004500004NoGood

room temp, FIRRun002, pedestalrun003, taget FW

Attachment 1: L6_p-side_004ModProp.pdf
Attachment 2: -Z_n-side_004ModProp.pdf
Attachment 3: L6_p-side_004Result.pdf
Attachment 4: L6_n-side_004ModProp.pdf
Attachment 5: L5_p-side_004ModProp.pdf
Attachment 6: L6_n-side_004Result.pdf
Attachment 7: L5_n-side_004ModProp.pdf
Attachment 8: L5_p-side_004Result.pdf
Attachment 9: L3_p-side_004ModProp.pdf
Attachment 10: L5_n-side_004Result.pdf
Attachment 11: L3_n-side_004ModProp.pdf
Attachment 12: L3_p-side_004Result.pdf
Attachment 13: L3_n-side_004Result.pdf
Attachment 14: L4_p-side_004ModProp.pdf
Attachment 15: L4_n-side_004ModProp.pdf
Attachment 16: L4_p-side_004Result.pdf
  18   Sat Jun 6 12:43:55 2015 Hao YinBelle II FADC (H6A)Hardware006500006NoGood

FIRRun002, room temp, pedestalrun005,
layout: same as HW 005
target: -z, pos 6 (strip: p-0, n-0);

NOTE: results shown in the attachments has been evaluated with cmc containing 128 strip
 

Attachment 1: -Z_edge_p-side_006ModProp.pdf
Attachment 2: -Z_edge_n-side_006ModProp.pdf
Attachment 3: -Z_edge_p-side_006Result.pdf
Attachment 4: L6_p-side_006ModProp.pdf
Attachment 5: -Z_edge_n-side_006Result.pdf
Attachment 6: L6_n-side_006ModProp.pdf
Attachment 7: L6_p-side_006Result.pdf
Attachment 8: L5_p-side_006ModProp.pdf
Attachment 9: L6_n-side_006Result.pdf
Attachment 10: L5_n-side_006ModProp.pdf
Attachment 11: L5_p-side_006Result.pdf
Attachment 12: L3_p-side_006ModProp.pdf
Attachment 13: L5_n-side_006Result.pdf
Attachment 14: L3_n-side_006ModProp.pdf
Attachment 15: L3_p-side_006Result.pdf
Attachment 16: L3_n-side_006Result.pdf
Attachment 17: L4_p-side_006ModProp.pdf
Attachment 18: L4_n-side_006ModProp.pdf
Attachment 19: L4_p-side_006Result.pdf
Attachment 20: L4_n-side_006Result.pdf
  19   Sat Jun 6 14:28:28 2015 Hao YinBelle II FADC (H6A)Harware007500007NoGood

room temp, FIRRun002, PedestalRun005, room temp

target: CE, pos 7 (p-0, n-0)

Attachment 1: CE_edge_p-side_007ModProp.pdf
Attachment 2: CE_edge_n-side_007ModProp.pdf
Attachment 3: CE_edge_p-side_007Result.pdf
Attachment 4: CE_edge_n-side_007Result.pdf
Attachment 5: L6_p-side_007ModProp.pdf
Attachment 6: L6_n-side_007ModProp.pdf
Attachment 7: L6_p-side_007Result.pdf
Attachment 8: L5_p-side_007ModProp.pdf
Attachment 9: L6_n-side_007Result.pdf
Attachment 10: L5_n-side_007ModProp.pdf
Attachment 11: L5_p-side_007Result.pdf
Attachment 12: L3_p-side_007ModProp.pdf
Attachment 13: L5_n-side_007Result.pdf
Attachment 14: L3_n-side_007ModProp.pdf
Attachment 15: L3_p-side_007Result.pdf
Attachment 16: L3_n-side_007Result.pdf
Attachment 17: L4_p-side_007ModProp.pdf
Attachment 18: L4_n-side_007ModProp.pdf
Attachment 19: L4_p-side_007Result.pdf
Attachment 20: L4_n-side_007Result.pdf
  22   Sat Jun 6 16:18:48 2015 Benedikt WürknerSVD3 (H6B)hardware runhw00350000  Unknown

Table: 100:70

Bias: +-50V

Run to confirm trigger delay

  23   Sat Jun 6 16:48:41 2015 Hao YinBelle II FADC (H6A)Hardware008500008NoGood

room temp, FIRRun002, PedestalRun005, room temp

target: FW, pos 8 (p-0, n-0)

Attachment 1: FW_edge_1_p-side_008ModProp.pdf
Attachment 2: FW_edge_1_n-side_008ModProp.pdf
Attachment 3: FW_edge_1_p-side_008Result.pdf
Attachment 4: FW_edge_1_n-side_008Result.pdf
Attachment 5: L6_p-side_008ModProp.pdf
Attachment 6: L6_n-side_008ModProp.pdf
Attachment 7: L6_p-side_008Result.pdf
Attachment 8: L5_p-side_008ModProp.pdf
Attachment 9: L6_n-side_008Result.pdf
Attachment 10: L5_n-side_008ModProp.pdf
Attachment 11: L5_p-side_008Result.pdf
Attachment 12: L3_p-side_008ModProp.pdf
Attachment 13: L5_n-side_008Result.pdf
Attachment 14: L3_n-side_008ModProp.pdf
Attachment 15: L3_p-side_008Result.pdf
Attachment 16: L3_n-side_008Result.pdf
Attachment 17: L4_p-side_008ModProp.pdf
Attachment 18: L4_n-side_008ModProp.pdf
Attachment 19: L4_p-side_008Result.pdf
Attachment 20: L4_n-side_008Result.pdf
  35   Sun Jun 7 13:21:15 2015 Hao YinBelle II FADC (H6A)Hardware01150000  Good

cooled (see attachment)

FIRRun002, PedestalRun006

target: -Z, pos 2

Attachment 1: Pos2.PNG
Pos2.PNG
  37   Sun Jun 7 15:03:31 2015 Thomas BergauerSVD3 (H6B)hardware run with TLU and Telescopehw050500002NoGood

RUN WITH SVD3 plus telescope

EUDET Run 50

Mimosa Threshold 7

Pos 2: x=69.3 mm, y=79 mm (Hits in APV 3-4 und 8-9 in p-Seite und 13 und 18 in n-Seite) 

  38   Sun Jun 7 15:59:05 2015 Hao YinBelle II FADC (H6A)Hardware01250000  Unknown

cooled (see attachment)

FIRRun002, PedestalRun006

target: CE, pos 2

cooling box emergency break ... ie about the last 1-10 k not useable.

Attachment 1: Pos3.PNG
Pos3.PNG
  40   Sun Jun 7 20:03:09 2015 Thomas BergauerSVD3 (H6B)hardware run with TLU and Telescopehw051500003NoGood

RUN WITH SVD3 plus telescope

EUDET Run 51

Mimosa Threshold 7

Pos 3: x=38.6 mm, y=84 mm

  41   Sun Jun 7 20:03:31 2015 Thomas BergauerSVD3 (H6B)hardware run with TLU and Telescopehw052500004NoGood

RUN WITH SVD3 plus telescope

EUDET Run 52

Mimosa Threshold 7

Pos 4: x=130.7 mm, y=84 mm (hits auf APV 2 und (bisschen) 3, (bisschen) 8 und 9, 15 und 16

  42   Sun Jun 7 20:37:56 2015 Benedikt WürknerSVD3 (H6B)hardware run with TLU and Telescopehw053500005 Good

RUN WITH SVD3 plus telescope

EUDET Run 53

Mimosa Threshold 6

Pos 5: x=30.5 mm, y= 99.74 mm (wide side top)

  43   Sun Jun 7 23:04:06 2015 Hao YinBelle II FADC (H6A)Hardware01350000  Good

cooled (see attachment)

FIRRun002, PedestalRun006

target: CE, pos 3

cooling box emergency break ... ie about the last 1-10 k not useable.

ELOG V3.1.5-fc6679b