Home CMS Production Clean room MedAustron HEPHY testbeams old
testbeam-RD50-DESY-Jul2023 testbeam-RD50-CERN-Oct2022 testbeam-DESY-Oct2017 testbeam-DESY-April2017 testbeam-SPS2015 testbeam-SPS2014 testbeam-DESY14 testbeam-SPS12 testbeam-SPS11 testbeam-SPS10 testbeam-SPS09 testbeam-SPS08 LP-TPC
  Belle testbeam at SPS in June 2015, Page 1 of 6  Not logged in ELOG logo
New entries since:Thu Jan 1 01:00:00 1970
ID Date Authordown Project Subject Run Number Events XYPosition Cooling Data
  3   Wed Jun 3 17:23:07 2015 Thomas BergauerBelle II FADC (H6A)XY stage positions    Unknown

x-Achse: positiv Richtung Saleve (counting room)

y-Achse: positiv Richtung UNTEN!!

 

position of laddertestbox xy stages:

Rev. Pos (BWD Sensor, BWD, Oben) x= 82.3, y=110.6

Mitte Sensor:

Pos 1: (mitte BWD sensor): x=144.74, y=80.8

Pos 2: (mitte Origami -z): x=269.62, y=80.8

Pos 3: (mitte Origami ce): x=394.42, y=80.8

Pos 4 (mitte FWD Micron Sensor): x=517, y=80.8

Ecke:

Pos 5 (Ecke BWD sensor): x=92.3, y=105.6

Pos 6 (Ecke Origami -z): x=217.18, y=105.6

Pos 7 (Ecke Origami ce): x=342.06, y=105.6

Pos 8 (Ecke FWD sensor): x=467,62, y=56,3 

Pos 9 (Ecke FWD sensor): x=568,33 y=64,48

Attachment 1: L5_Class_B-.PNG
L5_Class_B-.PNG
  36   Sun Jun 7 14:44:29 2015 Thomas BergauerSVD3 (H6B)XY Stage and DUT Positions    Unknown

Coordinate system:

pos x-Direction = Jura side

pos y-Direction = Down

Zero-point is in the top right corner in Beam direction

 

absolute Position of PI Stages:

Pos 1: x=100 mm, y=79 mm (Hits in APV 3 und 8-9 in p-Seite und 14 und 17 in n-Seite )

Pos 2: x=69.3 mm, y=79 mm (Hits in APV 3-4 und 8-9 in p-Seite und 13 und 18 in n-Seite) 

Pos 3: x=38.6 mm, y=84 mm

Pos 4: x=130.7 mm, y=84 mm

Pos 5: x=30.5 mm, y= 99.74 mm (wide side top)

Pos 6: x=136.08 mm, y= 91.49 mm (narrow side top)

Pos 7: x= 30.5 mm, y= 79 mm (wide side center)

Pos 8: x=136.08 mm, y= 79 mm (narrow side center)

Pos 9: x=30.5 mm, y= 60.67 mm (wide side down)

Pos 10: x= 136.08mm, y=68.9 mm (narrow side down)

Attachment 1: FWD-BWD.PNG
FWD-BWD.PNG
Attachment 2: apv-numbering.jpg
apv-numbering.jpg
Attachment 3: FWD-BWD_Bemaßung.PNG
FWD-BWD_Bemaßung.PNG
  37   Sun Jun 7 15:03:31 2015 Thomas BergauerSVD3 (H6B)hardware run with TLU and Telescopehw050500002NoGood

RUN WITH SVD3 plus telescope

EUDET Run 50

Mimosa Threshold 7

Pos 2: x=69.3 mm, y=79 mm (Hits in APV 3-4 und 8-9 in p-Seite und 13 und 18 in n-Seite) 

  40   Sun Jun 7 20:03:09 2015 Thomas BergauerSVD3 (H6B)hardware run with TLU and Telescopehw051500003NoGood

RUN WITH SVD3 plus telescope

EUDET Run 51

Mimosa Threshold 7

Pos 3: x=38.6 mm, y=84 mm

  41   Sun Jun 7 20:03:31 2015 Thomas BergauerSVD3 (H6B)hardware run with TLU and Telescopehw052500004NoGood

RUN WITH SVD3 plus telescope

EUDET Run 52

Mimosa Threshold 7

Pos 4: x=130.7 mm, y=84 mm (hits auf APV 2 und (bisschen) 3, (bisschen) 8 und 9, 15 und 16

  50   Mon Jun 8 11:33:24 2015 Thomas Bergauercommonbeam profile    Unknown

120GeV hadrons, beam config H6A.BELLE.003

Attachment 1: Beamprofile.png
Beamprofile.png
  58   Mon Jun 8 18:08:49 2015 Thomas BergauerSVD3 (H6B)Telescope online monitor    Unknown

a working version of the EUDET online monitor (which works also with the FE-I4) is at the following location

~/BELLETEST/eudaq-neu/build/monitors/onlinemon$ ./OnlineMon.exe -sc 0 -f /home/telescope/eudaq/data/run000060.raw

  66   Tue Jun 9 10:01:03 2015 Lukas BullaSVD3 (H6B)TLU setup info    Unknown

Channels:

  • Upstream vertical -> channel 0; (bitmask 1)
  • Upstream horizontal -> channel 1; (bitmask 2)
  • Downstream vertical -> channel 2; (bitmask 4)
  • Downstream horizontal ->channel 3; (bitmask 8)

 

TLU DuT interface:

DUT Interface Bitmask DAQ
1 1 Mimosa (EUDET Telescope)
2 2 leer
3 4 SVD3
4 8 FE-I4

 

Attachment 1: upstream.jpg
upstream.jpg
Attachment 2: downstream.jpg
downstream.jpg
  4   Thu Jun 4 14:15:50 2015 Hao YinBelle II FADC (H6A)FIR001   Good

FIR filer and ADC delay with all sensor and telescope.
telescope n-side switched.

  5   Thu Jun 4 14:16:20 2015 Hao YinBelle II FADC (H6A)Pedestal00110000  Good

FirRun001, room temp
telescope n-side switched.

  6   Thu Jun 4 15:12:41 2015 Hao YinBelle II FADC (H6A)Hardware001500001NoGood

PedestalRun001, FIRRun001, room temp
telescope n-side switched.
In order to correct the position change the

Attachment 1: BW_p-side_001Result.pdf
Attachment 2: BW_n-side_001Result.pdf
Attachment 3: L6_p-side_001ModProp.pdf
Attachment 4: L6_n-side_001ModProp.pdf
Attachment 5: L6_p-side_001Result.pdf
Attachment 6: L5_p-side_001ModProp.pdf
Attachment 7: L6_n-side_001Result.pdf
Attachment 8: L5_n-side_001ModProp.pdf
Attachment 9: L5_p-side_001Result.pdf
Attachment 10: L3_p-side_001ModProp.pdf
Attachment 11: L5_n-side_001Result.pdf
Attachment 12: L3_p-side_001Result.pdf
Attachment 13: L3_n-side_001ModProp.pdf
Attachment 14: L3_n-side_001Result.pdf
Attachment 15: L4_p-side_001ModProp.pdf
Attachment 16: L4_n-side_001ModProp.pdf
Attachment 17: L4_p-side_001Result.pdf
Attachment 18: L4_n-side_001Result.pdf
Attachment 19: BW_p-side_001ModProp.pdf
Attachment 20: BW_n-side_001ModProp.pdf
  7   Thu Jun 4 18:44:50 2015 Hao YinBelle II FADC (H6A)Hardware002500002NoGood

room temp, FIRRun001, pedestal run 003

Attachment 1: -Z_p-side_002ModProp.pdf
Attachment 2: -Z_n-side_002ModProp.pdf
Attachment 3: -Z_p-side_002Result.pdf
Attachment 4: L6_p-side_002ModProp.pdf
Attachment 5: -Z_n-side_002Result.pdf
Attachment 6: L6_n-side_002ModProp.pdf
Attachment 7: L6_p-side_002Result.pdf
Attachment 8: L5_p-side_002ModProp.pdf
Attachment 9: L6_n-side_002Result.pdf
Attachment 10: L5_n-side_002ModProp.pdf
Attachment 11: L5_p-side_002Result.pdf
Attachment 12: L3_p-side_002ModProp.pdf
Attachment 13: L5_n-side_002Result.pdf
Attachment 14: L3_n-side_002ModProp.pdf
Attachment 15: L3_p-side_002Result.pdf
Attachment 16: L3_n-side_002Result.pdf
Attachment 17: L4_p-side_002ModProp.pdf
Attachment 18: L4_n-side_002ModProp.pdf
Attachment 19: L4_p-side_002Result.pdf
  8   Thu Jun 4 18:45:42 2015 Hao YinBelle II FADC (H6A)Pedestal00310000  Good

firrun003, room temp
 

  10   Thu Jun 4 22:07:16 2015 Hao YinBelle II FADC (H6A)Hardware003189k3NoGood

CE. pedestal run 003. Fir run 002. Room temp

Attachment 1: CE_p-side_003ModProp.pdf
Attachment 2: L4_n-side_002Result.pdf
Attachment 3: CE_n-side_003ModProp.pdf
Attachment 4: CE_p-side_003Result.pdf
Attachment 5: CE_n-side_003Result.pdf
Attachment 6: L6_p-side_003ModProp.pdf
Attachment 7: L6_n-side_003ModProp.pdf
Attachment 8: L6_p-side_003Result.pdf
Attachment 9: L6_n-side_003Result.pdf
Attachment 10: L5_p-side_003ModProp.pdf
Attachment 11: L5_n-side_003ModProp.pdf
Attachment 12: L5_p-side_003Result.pdf
Attachment 13: L3_p-side_003ModProp.pdf
Attachment 14: L5_n-side_003Result.pdf
Attachment 15: L3_n-side_003ModProp.pdf
Attachment 16: L3_p-side_003Result.pdf
Attachment 17: L3_n-side_003Result.pdf
Attachment 18: L4_p-side_003ModProp.pdf
Attachment 19: L4_n-side_003ModProp.pdf
Attachment 20: L4_p-side_003Result.pdf
Attachment 21: L4_n-side_003Result.pdf
  11   Fri Jun 5 08:20:27 2015 Hao YinBelle II FADC (H6A)Hardware004500004NoGood

room temp, FIRRun002, pedestalrun003, taget FW

Attachment 1: L6_p-side_004ModProp.pdf
Attachment 2: -Z_n-side_004ModProp.pdf
Attachment 3: L6_p-side_004Result.pdf
Attachment 4: L6_n-side_004ModProp.pdf
Attachment 5: L5_p-side_004ModProp.pdf
Attachment 6: L6_n-side_004Result.pdf
Attachment 7: L5_n-side_004ModProp.pdf
Attachment 8: L5_p-side_004Result.pdf
Attachment 9: L3_p-side_004ModProp.pdf
Attachment 10: L5_n-side_004Result.pdf
Attachment 11: L3_n-side_004ModProp.pdf
Attachment 12: L3_p-side_004Result.pdf
Attachment 13: L3_n-side_004Result.pdf
Attachment 14: L4_p-side_004ModProp.pdf
Attachment 15: L4_n-side_004ModProp.pdf
Attachment 16: L4_p-side_004Result.pdf
  12   Fri Jun 5 12:02:29 2015 Hao YinBelle II FADC (H6A)Sixlet Calibration001   Good

room temp max subevent at 2. with lat = 96

  13   Fri Jun 5 12:03:34 2015 Hao YinBelle II FADC (H6A)Sixlet Calibration002   Good

lat = 97 to a greater range of lat scan

  14   Fri Jun 5 19:55:00 2015 Hao YinBelle II FADC (H6A)Sixlet Calibration003   Unknown

lat = 98

room temp

pedestalrun 003

  15   Fri Jun 5 19:59:44 2015 Hao YinBelle II FADC (H6A)Pedestal00410000  Good

update pedestal values for room temp sixlet runs.
 

  16   Fri Jun 5 23:38:51 2015 Hao YinBelle II FADC (H6A)Pedestal00510000  Unknown

Readjust after cooling box.

room temp, firrun002
 

ELOG V3.1.5-fc6679b