| ID |
Date |
Author |
Project |
Subject |
Run Number |
Events |
StartTime |
EndTime |
|
55
|
Sat Oct 2 09:57:20 2010 |
Thomas Bergauer | CNM | run | run025 | 150k | 02.10.2010 09:54:28 | 02.10.2010 14:21:20 |
CMN-SILC stack
HV_SILC (Katze)=75V, 0.25uA (6 SiLC)
HV_CNM (Keithley)=30V, CNM_1=84nA, CNM_2=4.3uA
new position along the CNM strips (XY-table to 143/76/187.5)
telescope run 20122
|
| Attachment 1: run20122.png
|
 |
| Attachment 2: slowcontrol_cnm.png
|
 |
| Attachment 3: cnm_2d_1.png
|
 |
| Attachment 4: cnm_2d_2.png
|
 |
|
64
|
Sun Oct 3 14:35:12 2010 |
Marko Dragicevic | CNM | cal | cal009 | 83800 | 03.10.2010 13:50:54 | |
CMN-SILC stack
HV_SILC (Katze)=75V, 0.25uA (6 SiLC)
HV_CNM (Keithley)=30V, CNM_1=84nA, CNM_2=4.3uA
DUT outside of beam
calibration started after 1 hour warmup |
| Attachment 1: cal009_cal_apv6.png
|
 |
| Attachment 2: cal009_cal_apv7.png
|
 |
| Attachment 3: slowcontrol_CNM_cal009.gif
|
 |
|
56
|
Sat Oct 2 15:24:00 2010 |
Erik Huemer | ITE | XY Position and Slow Control | | | | |
center position: 119/48/187,5
|
| Attachment 1: ITE128_SlowControl_FirstRun.png
|
 |
|
58
|
Sat Oct 2 17:24:12 2010 |
Markus Friedl | ITE | run | run026 | 5834 | 02.10.2010 17:23:46 | 02.10.2010 17:31:51 |
2 x SILC + 2 x ITE
HV=100V
trying to find beam
telescope run 20124 |
|
59
|
Sat Oct 2 17:27:14 2010 |
Thomas Bergauer | ITE | cal | cal007 | 83800 | 02.10.2010 17:11:18 | |
ITE: 2 DUTs
2 x SILC + 2 x ITE
HV=100V
Beam on
one short only per sensor |
| Attachment 1: intcal_ITE10PAD_W7.png
|
 |
| Attachment 2: intcal_ITE10PAD_W9.png
|
 |
|
60
|
Sat Oct 2 17:35:51 2010 |
Markus Friedl | ITE | run | run027 | 2999 | 02.10.2010 17:34:51 | 02.10.2010 17:38:39 |
2 x SILC + 2 x ITE
HV=100V
telescope position: 107
telescope run 20125
beam not found yet |
|
61
|
Sat Oct 2 18:36:57 2010 |
Markus Friedl | ITE | run | run028 | 162263 | 02.10.2010 18:34:06 | 03.10.2010 08:11:13 |
6 x SILC + 2 x ITE
HV=100V
telescope position: 119
short break ~2.10.2010 20:00 (beam off for a couple of minutes for access by marcos)
telescope run 20126 |
|
62
|
Sun Oct 3 08:14:39 2010 |
Markus Friedl | ITE | cal | cal008 | 83800 | 03.10.2010 08:13:06 | |
6 x SILC + 2 x ITE
HV=100V
telescope position: 119
no beam (technical problem) |
|
63
|
Sun Oct 3 08:19:13 2010 |
Markus Friedl | ITE | run | run029 | 75000 | 03.10.2010 08:33:28 | 03.10.2010 10:50:27 |
same as previous run
telescope run 20127
Configuration file for DAQ: cern10_ite_silc_single.cfg --> peak mode with 1 sample! |
|
87
|
Tue Oct 5 17:50:23 2010 |
Christian Irmler | ITE | cal | cal012 | 83800 | 05.10.2010 17:50:26 | 05.10.2010 18:09:48 |
6 x SILC + 2 x ITE
HV=100V
telescope position: 124/48
DUTs and SILC4/5 swapped
new module order (downstream): SILC0 - SILC3 - SILC1 - W7 - W9 - SILC2 - SILC4 -SILC5
SILC1 and SILC2 are horizontal
beam on
modules flushed with dry air (black tube)
rel. humidity: ~0% @ 26°C |
|
88
|
Tue Oct 5 18:13:05 2010 |
Christian Irmler | ITE | run | run048 | 533125 | 05.10.2010 18:14:57 | 06.10.2010 09:27:44 |
6 x SILC + 2 x ITE
HV=100V
telescope position: 124/48
telescope run: 20154-20155
DUTs and SILC4/5 swapped
new module order (downstream): SILC0 - SILC3 - SILC1 - W7 - W9 - SILC2 - SILC4 -SILC5
SILC1 and SILC2 are horizontal
beam on
modules flushed with dry air (black tube)
rel. humidity: ~0% @ 26°C |
| Attachment 1: LongtermITERun2.png
|
 |
|
3
|
Thu Sep 23 15:32:28 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_7_Baby4 -> UNBRAUCHBAR | | | | |
p-side: Hybrid 42
APV2: viele gerissene bonds der inneren Bondreihe
APV3: gerissene bonds innen
n-side: Hybrid 32
APV4: 0-35 fail
APV5: 10-40, 68 fail
|
| Attachment 1: hardrun_2826_7_type4_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_2826_7_type4_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_2826_7_type4_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_2826_7_type4_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_2826_7_type4_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_2826_7_type4_pednoise_apv5.png
|
 |
|
4
|
Thu Sep 23 15:37:54 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_19_Baby4 -> TRACKING & best DUT candidate | | | | |
p-side: Hybrid 48
alles ok
n-side: Hybrid 35 (wurde repariert, nachdem ein paar bonds dran glauben mussten...)
APV4: 15-25 hoher noise, keine Fehler zu sehen -> Sensorfehler?
APV5: 127&128 kreuzen sich, beim Behebungsversuch mehr Schaden angerichtet -> besser mal die Finger davon lassen! |
| Attachment 1: hardrun_2826_19_type4_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_2826_19_type4_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_2826_19_type4_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_2826_19_type4_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_2826_19_type4_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_2826_19_type4_pednoise_apv5.png
|
 |
|
5
|
Thu Sep 23 15:54:20 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_19_Baby3 -> DUT & TRACKING | | | | |
p-side: Hybrid 47
alles ok
n-side: Hybrid 38
APV5: Streifen 127 hoher Noise
ALS DUT VERWENDEN!
|
| Attachment 1: hardrun_2826_19_type3_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_2826_19_type3_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_2826_19_type3_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_2826_19_type3_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_2826_19_type3_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_2826_19_type3_pednoise_apv5.png
|
 |
|
6
|
Thu Sep 23 16:00:31 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_19_Baby2 -> TRACKING | | | | |
p-side: Hybrid 46
alles ok
n-side: Hybrid 37
APV4: 70-75 schlecht, nix zu sehen -> Sensorfehler
APV5: 115-128 schlecht, rebond fail?
FUER TRACKING GEEIGNET!
|
| Attachment 1: hardrun_2826_19_type2_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_2826_19_type2_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_2826_19_type2_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_2826_19_type2_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_2826_19_type2_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_2826_19_type2_pednoise_apv5.png
|
 |
|
7
|
Thu Sep 23 16:01:10 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_7_Baby3 -> DUT | | | | |
p-side: Hybrid 40
APV3: letzte 10 Streifennicht gebondet, ging sich beim Prototyp-Modul an der Stelle nicht aus
n-side: Hybrid 30
APV5: 57-64 schlecht, rebond fail?
ALS DUT GEEIGNET!
|
| Attachment 1: hardrun_2826_7_type3_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_2826_7_type3_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_2826_7_type3_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_2826_7_type3_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_2826_7_type3_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_2826_7_type3_pednoise_apv5.png
|
 |
|
8
|
Thu Sep 23 16:12:54 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_7_Baby2 -> DUT & TRACKING | | | | |
p-side: Hybrid 41
alles ok
n-side: Hybrid 31
APV4: Streifen 0, 83 schlecht
APV5: Streifen 64, 88, 126 schlecht
ALS DUT GEEIGNET!
FUER TRACKING GEEIGNET! |
| Attachment 1: hardrun_single_2826_7_type2_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_single_2826_7_type2_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_single_2826_7_type2_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_single_2826_7_type2_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_single_2826_7_type2_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_single_2826_7_type2_pednoise_apv5.png
|
 |
|
9
|
Thu Sep 23 16:19:54 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_1_Baby4, DUT EINGESCHRAENKT, TRACKING | | | | |
p-side: Hybrid 45
APV0: beide Randstreifen schlecht
APV1: Streifen 0 schlecht
APV3: beide Randstreifen etwas schlechter, nicht schlimm
n-side: Hybrid 36
APV4: 0, 9, 40, 79-85, 97, 102, 124 Sensorfehler?
APV5: 0-30 vereinzelt schlechte Streifen, 115-128 Bonds beruehren
ALS DUT AUGENZUDRUECKEN GEEIGNET!
FUER TRACKING GEEIGNET!
|
| Attachment 1: hardrun_single_2826_1_type4_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_single_2826_1_type4_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_single_2826_1_type4_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_single_2826_1_type4_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_single_2826_1_type4_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_single_2826_1_type4_pednoise_apv5.png
|
 |
|
10
|
Thu Sep 23 16:22:33 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_1_Baby3, TRACKING | | | | |
p-side: Hybrid 44
alles ok
n-side: Hybrid 34
APV4: zur Gaenze schlecht, APV-Fehler?
APV5: beide Randstreifen schlecht
FUER TRACKING GEEIGNET!
|
| Attachment 1: hardrun_single_2826_1_type3_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_single_2826_1_type3_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_single_2826_1_type3_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_single_2826_1_type3_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_single_2826_1_type3_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_single_2826_1_type3_pednoise_apv5.png
|
 |
|
11
|
Thu Sep 23 16:23:07 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_1_Baby2, DUT (eingeschraenkt) & TRACKING | | | | |
p-side: Hybrid 43
APV3: Streifen 9 schlecht
n-side: Hybrid 33
APV4: 0-10 andere Bond-Parameter?, 28&29 erhoehtes noise
APV5: 111-128: 4 schlechte Streifen + common mode correction?
ALS DUT GEEIGNET!
FUER TRACKING GEEIGNET!
|
| Attachment 1: hardrun_2826_1_type2_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_2826_1_type2_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_2826_1_type2_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_2826_1_type2_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_2826_1_type2_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_2826_1_type2_pednoise_apv5.png
|
 |