| ID |
Date |
Author |
Project |
Subject |
Run Number |
Events |
StartTime |
EndTime |
|
1
|
Wed Sep 15 10:25:13 2010 |
Marko Dragicevic | common | Equipment List | | | | |
Slow Control:
3x Source Measurement Unit Keithley K2410
-- Inv.Nr.: 540-702, 1000EUR
-- Inv.Nr.: 540-730, 1000EUR
-- Inv.Nr.: 540-709, 1000EUR
-- Koax-Kabel + Adapter auf Banane
Scanning Voltmeter Keithley K2700 , Inv.Nr.: 540-698, 1000EUR
-- Shunt-Widerstand-Platine
-- Flachbandkabel fuer Verbindung Shunt-Platine<->K2700
TRHX
-- 3 Sensoren
-- 2 lange Flachbandkabel, 1 serielles Kabel
LV-Power-Supplies, je 150EUR
-- GW Instek GPC-1850, SN.: 4080392
-- GW Instek GPC-1850D, Inv.Nr.: 545-059
-- GW Instek GPC-1850D, Inv.Nr.: 545-062
-- Systron Donner HR 20-10A, SN.: 781-092
-- Systron Donner HR 20-10A, SN.: 781-096
-- GW Instek GPS-3030D SN.: E871711
-- HAMEG MHP4030 SN.: 057910044 500EUR
Oszilloskop Tektronix TDS 3054, SN.: B011109, 2500EUR
-- 3 probes
Die Katze (Belle-HV-Supply)
-- 2x HV-Kabel 30m (rot/schwarz)
GBIP
USB Adapter NI GPIB-USB-HS, S/N 14693EB, 100EUR
-Kabel, 3x lang, 1x kurz
USB Temperaturlogger PicoTech TC-08, S/N.: VSR 08/519 100EUR
BELLE DAQ (CERN):
Chrisu-PC, Inv.Nr.: 401-925
-- Monitore
---- Belinea, Inv.Nr.: 401-696
---- Gericom, SN.: M1132GR5467345
-- Keyboard & Maus
Wiener 9U-VME-Crate, Inv.Nr.: 545-043, 2000EUR
-- Power Supply
-- VME-Controller
-- 4 VME-Module (1x Buffer, 1, Neco, 2x FADC)
DOCK-Box
-- Power Kabel
VME-Kabel (bockig) + Verlaengerung
30m-Kabel (8xCat7, 2xCat5, 2xgrau)
Lemo-Kabel
100pin-Flachkabel Neco-Buffer
Bananenkabel
Hybridkabel
Special TLU-Adapter (flipping pin order of RJ45)
Schrauben für Crate-Montage
Erdungskabel (liegen am CERN im Labor)
Magic Box
APVDAQ (Mol):
PC Inv.Nr: 401-943
-- Ilyama E2407, S/N 1105702000889
-- Keyboard & Maus
VME Crate Inv.Nr: 545-030
-- Create Controller Inv.Nr: 540-732
-- 3x APVDAQ
Repeater Board
-- 3x auf Platte montiert
Kabel
-- VME-Kabel (bockig)
-- 4x Netzwerk (gelb 1:1 verschalten)
-- 4x Netzwerk (grau 1:1 verschalten)
-- 1x Flachband
-- diverse Bananen
DUT:
Schraubenbox bau
-- diverse Schrauben
-- Gewindestangen
-- Fluegelmittern
-- 2x Sockel
4mm Steckschlauch fuer Trockenluft
Anschluss 1/8" auf 4mm Steckschlauch
Druckminderer
-- 6mm Snap-In
-- 6mm Schlauch
Chiller Huber ministat 230, Inv.Nr.: 482-021, 3000EUR
-- Manual
-- Netzteil
-- langes serielles Kabel
-- 5-6mm Schlauch
-- Adapter
-- 5 Liter dest. Wasser (falls noch Platz ist)
-- Frostschutz
-- LabView (falls ferngesteuert)
Box-Deckel
Baseplates (4?)
Schwarze Selbstklebefolie
Alufolie
GROSSES SCHWARZES LICHTDICHTES TUCH !!!!
Module
-- 2 x Micron Trapezoid
-- 2 x 6" Origami
-- 9 x Micron Baby
-- 2 x CNM 2D Sensoren
-- 8x SiLC (No. 0-7)
-- 2x Pt
EDV:
Netzwerk-Switch:
-- D-Link 8-Port GBit-Switch DGS1008D S/N F37v89B010104, 40 EUR
WLAN-Router: Linksys WRT54GL-DE, SN.: CL7B1H502248, 60 EUR
1TB externe Festplatte: Western Digital MyBook, SN.: WCAJ1469094, 40 EUR
-- Netzgeraet
-- USB-Kabel
-- Firewire 400/800 Kabel
Webcam
USB-Stick
Etikettiergeraet: Brother P-touch 1000
Laptops
-- Apple MacBook (MV) Inv.Nr.: 401-810
(-- Apple MacBook Pro (MD) Inv Nr.: 401-831)
2x USB-Seriell Adapter
Netzwerkkabel
1 Trommel Ethernet-Kabel (100m, vom Walzel)
einige RJ-45 Stecker
2.5" externe HD
CD/DVD Rohlinge
Tools:
Diverse Adaptoren Lemo-BNC, Lemo-Lemo
Taschenlampe + 2x Hirnbirn
Massband
Multimeter
Werkzeug (Schraubenzieher & Co)
Pinzetten
Laserpointer
Schwarze Fetzen
Gaffa
Doppelscotch
Kabelbinder
Druckluft zur Reinigung
Adapter f. Steckdosen
Verteiler-Leisten
Kabeltrommel
Schaltbare Steckerleisten
Tixo klein & gross
Loetstation Advanced JBC, SN.: 76841165, inkl. Zubehoer
Ethernet-Crimp-Zange
Eisensagl
Schublehre
Wasserwaage
Misc:
Fondueset 
Spiegelreflex Digitalkamera
-- Stativ
-- Reflexionszelt
Scheinwerfer
-- 3 x 500 W
-- 2 x Stativ
Akkus+Ladegerät
Dickes Logbook
Kugelschreiber/Bleistifte
Pflaster
Carnet ATA |
|
3
|
Thu Sep 23 15:32:28 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_7_Baby4 -> UNBRAUCHBAR | | | | |
p-side: Hybrid 42
APV2: viele gerissene bonds der inneren Bondreihe
APV3: gerissene bonds innen
n-side: Hybrid 32
APV4: 0-35 fail
APV5: 10-40, 68 fail
|
| Attachment 1: hardrun_2826_7_type4_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_2826_7_type4_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_2826_7_type4_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_2826_7_type4_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_2826_7_type4_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_2826_7_type4_pednoise_apv5.png
|
 |
|
4
|
Thu Sep 23 15:37:54 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_19_Baby4 -> TRACKING & best DUT candidate | | | | |
p-side: Hybrid 48
alles ok
n-side: Hybrid 35 (wurde repariert, nachdem ein paar bonds dran glauben mussten...)
APV4: 15-25 hoher noise, keine Fehler zu sehen -> Sensorfehler?
APV5: 127&128 kreuzen sich, beim Behebungsversuch mehr Schaden angerichtet -> besser mal die Finger davon lassen! |
| Attachment 1: hardrun_2826_19_type4_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_2826_19_type4_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_2826_19_type4_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_2826_19_type4_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_2826_19_type4_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_2826_19_type4_pednoise_apv5.png
|
 |
|
5
|
Thu Sep 23 15:54:20 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_19_Baby3 -> DUT & TRACKING | | | | |
p-side: Hybrid 47
alles ok
n-side: Hybrid 38
APV5: Streifen 127 hoher Noise
ALS DUT VERWENDEN!
|
| Attachment 1: hardrun_2826_19_type3_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_2826_19_type3_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_2826_19_type3_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_2826_19_type3_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_2826_19_type3_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_2826_19_type3_pednoise_apv5.png
|
 |
|
6
|
Thu Sep 23 16:00:31 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_19_Baby2 -> TRACKING | | | | |
p-side: Hybrid 46
alles ok
n-side: Hybrid 37
APV4: 70-75 schlecht, nix zu sehen -> Sensorfehler
APV5: 115-128 schlecht, rebond fail?
FUER TRACKING GEEIGNET!
|
| Attachment 1: hardrun_2826_19_type2_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_2826_19_type2_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_2826_19_type2_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_2826_19_type2_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_2826_19_type2_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_2826_19_type2_pednoise_apv5.png
|
 |
|
7
|
Thu Sep 23 16:01:10 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_7_Baby3 -> DUT | | | | |
p-side: Hybrid 40
APV3: letzte 10 Streifennicht gebondet, ging sich beim Prototyp-Modul an der Stelle nicht aus
n-side: Hybrid 30
APV5: 57-64 schlecht, rebond fail?
ALS DUT GEEIGNET!
|
| Attachment 1: hardrun_2826_7_type3_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_2826_7_type3_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_2826_7_type3_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_2826_7_type3_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_2826_7_type3_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_2826_7_type3_pednoise_apv5.png
|
 |
|
8
|
Thu Sep 23 16:12:54 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_7_Baby2 -> DUT & TRACKING | | | | |
p-side: Hybrid 41
alles ok
n-side: Hybrid 31
APV4: Streifen 0, 83 schlecht
APV5: Streifen 64, 88, 126 schlecht
ALS DUT GEEIGNET!
FUER TRACKING GEEIGNET! |
| Attachment 1: hardrun_single_2826_7_type2_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_single_2826_7_type2_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_single_2826_7_type2_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_single_2826_7_type2_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_single_2826_7_type2_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_single_2826_7_type2_pednoise_apv5.png
|
 |
|
9
|
Thu Sep 23 16:19:54 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_1_Baby4, DUT EINGESCHRAENKT, TRACKING | | | | |
p-side: Hybrid 45
APV0: beide Randstreifen schlecht
APV1: Streifen 0 schlecht
APV3: beide Randstreifen etwas schlechter, nicht schlimm
n-side: Hybrid 36
APV4: 0, 9, 40, 79-85, 97, 102, 124 Sensorfehler?
APV5: 0-30 vereinzelt schlechte Streifen, 115-128 Bonds beruehren
ALS DUT AUGENZUDRUECKEN GEEIGNET!
FUER TRACKING GEEIGNET!
|
| Attachment 1: hardrun_single_2826_1_type4_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_single_2826_1_type4_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_single_2826_1_type4_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_single_2826_1_type4_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_single_2826_1_type4_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_single_2826_1_type4_pednoise_apv5.png
|
 |
|
10
|
Thu Sep 23 16:22:33 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_1_Baby3, TRACKING | | | | |
p-side: Hybrid 44
alles ok
n-side: Hybrid 34
APV4: zur Gaenze schlecht, APV-Fehler?
APV5: beide Randstreifen schlecht
FUER TRACKING GEEIGNET!
|
| Attachment 1: hardrun_single_2826_1_type3_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_single_2826_1_type3_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_single_2826_1_type3_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_single_2826_1_type3_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_single_2826_1_type3_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_single_2826_1_type3_pednoise_apv5.png
|
 |
|
11
|
Thu Sep 23 16:23:07 2010 |
Manfred Valentan | Micron Baby | Modul B2Micron_2826_1_Baby2, DUT (eingeschraenkt) & TRACKING | | | | |
p-side: Hybrid 43
APV3: Streifen 9 schlecht
n-side: Hybrid 33
APV4: 0-10 andere Bond-Parameter?, 28&29 erhoehtes noise
APV5: 111-128: 4 schlechte Streifen + common mode correction?
ALS DUT GEEIGNET!
FUER TRACKING GEEIGNET!
|
| Attachment 1: hardrun_2826_1_type2_pednoise_apv0.png
|
 |
| Attachment 2: hardrun_2826_1_type2_pednoise_apv1.png
|
 |
| Attachment 3: hardrun_2826_1_type2_pednoise_apv2.png
|
 |
| Attachment 4: hardrun_2826_1_type2_pednoise_apv3.png
|
 |
| Attachment 5: hardrun_2826_1_type2_pednoise_apv4.png
|
 |
| Attachment 6: hardrun_2826_1_type2_pednoise_apv5.png
|
 |
|
12
|
Fri Sep 24 12:09:32 2010 |
Manfred Valentan | BELLE | gds-file of Micron wafer | | | | |
|
| Attachment 1: WaferMicron30.gds
|
| Attachment 2: DSSD_layerproperties.lyp
|
<?xml version="1.0"?>
<layer-properties>
<properties>
<frame-color>#000000</frame-color>
<fill-color>#000000</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I9</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>0/0@1 Mask dimensions</name>
<source>0/0@1</source>
</properties>
<properties>
<frame-color/>
<fill-color/>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern/>
<visible>true</visible>
<transparent>false</transparent>
<width>0</width>
<marked>false</marked>
<animation>0</animation>
<name>p-side (junction)</name>
<source>*/*@*</source>
<group-members>
<frame-color>#01ff6b</frame-color>
<fill-color>#01ff6b</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I9</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>1/0@1 N+</name>
<source>1/0@1</source>
</group-members>
<group-members>
<frame-color>#ff0000</frame-color>
<fill-color>#ff0000</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I9</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>2/0@1 P+</name>
<source>2/0@1</source>
</group-members>
<group-members>
<frame-color>#ff8000</frame-color>
<fill-color>#ff8000</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I9</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>3/0@1 Via</name>
<source>3/0@1</source>
</group-members>
<group-members>
<frame-color>#000080</frame-color>
<fill-color>#000080</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I9</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>4/0@1 Metal</name>
<source>4/0@1</source>
</group-members>
<group-members>
<frame-color>#800080</frame-color>
<fill-color>#800080</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I9</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>5/0@1 Passivation</name>
<source>5/0@1</source>
</group-members>
<group-members>
<frame-color>#91ff00</frame-color>
<fill-color>#91ff00</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I9</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>6/0@1 Polysilicon</name>
<source>6/0@1</source>
</group-members>
<group-members>
<frame-color>#008000</frame-color>
<fill-color>#008000</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I9</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>7/0@1 Polysilicon Head</name>
<source>7/0@1</source>
</group-members>
<group-members>
<frame-color>#ff8000</frame-color>
<fill-color>#ff8000</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I9</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>8/0@1 Via Edge Ring</name>
<source>8/0@1</source>
</group-members>
</properties>
<properties>
<frame-color/>
<fill-color/>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern/>
<visible>true</visible>
<transparent>false</transparent>
<width>0</width>
<marked>false</marked>
<animation>0</animation>
<name>n-side (ohmic)</name>
<source>*/*@*</source>
<group-members>
<frame-color>#01ff6b</frame-color>
<fill-color>#01ff6b</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I5</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>21/0@1 N+ Back</name>
<source>21/0@1</source>
</group-members>
<group-members>
<frame-color>#ff0000</frame-color>
<fill-color>#ff0000</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I5</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>22/0@1 P+ Back</name>
<source>22/0@1</source>
</group-members>
<group-members>
<frame-color>#ff8000</frame-color>
<fill-color>#ff8000</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I5</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>23/0@1 Via Back</name>
<source>23/0@1</source>
</group-members>
<group-members>
<frame-color>#0000ff</frame-color>
<fill-color>#0000ff</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I5</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>24/0@1 Metal Back</name>
<source>24/0@1</source>
</group-members>
<group-members>
<frame-color>#800080</frame-color>
<fill-color>#800080</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I5</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>25/0@1 Passivation Back</name>
<source>25/0@1</source>
</group-members>
<group-members>
<frame-color>#91ff00</frame-color>
<fill-color>#91ff00</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I5</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>26/0@1 Polysilicon Back</name>
<source>26/0@1</source>
</group-members>
<group-members>
<frame-color>#008000</frame-color>
<fill-color>#008000</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I5</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>27/0@1 Polysilicon Head Back</name>
<source>27/0@1</source>
</group-members>
<group-members>
<frame-color>#ff8000</frame-color>
<fill-color>#ff8000</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I5</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>28/0@1 Via Edge Ring Back</name>
<source>28/0@1</source>
</group-members>
</properties>
<properties>
<frame-color>#000000</frame-color>
<fill-color>#000000</fill-color>
<frame-brightness>0</frame-brightness>
<fill-brightness>0</fill-brightness>
<dither-pattern>I9</dither-pattern>
<visible>true</visible>
<transparent>false</transparent>
<width>1</width>
<marked>false</marked>
<animation>0</animation>
<name>100/0@1 Wafer Dimensions</name>
<source>100/0@1</source>
</properties>
</layer-properties>
|
|
13
|
Mon Sep 27 15:39:33 2010 |
Thomas Bergauer | common | PI-XY Table | | | | |
M-521.dd: (links/rechts)
downstream rechts => pos. limit [0]
downstream links => neg. limit [207]
----------------------
M-511.dd: (oben/unten)
oben [102]
unten [0]
----------------------
M-060.dg: (rotation)
parallel beam [7,5]
-------------------------------------------
Remote Control:
lokal ssh tunnel starten:
ssh -g -C -L5959:zenpixelw:5900 eudet@eudetmac001.cern.ch
danach mit "Chicken of the VNC" (von lokalem Mac) VNC auf localhost (port 5959).
|
|
14
|
Mon Sep 27 15:41:28 2010 |
Thomas Bergauer | common | Szintillatoren | | | | |
1: breit (1)
2: schmal (2)
3: breit (4)
4: schmal (8)
AND aus beiden breiten: 5
AND aus beiden schmalen: 10
|
|
15
|
Mon Sep 27 15:42:09 2010 |
Thomas Bergauer | common | TLU: wir stecken auf DUT 3 | | | | |
TLUControl.exe ist auf zenpixell3 unter /home/eudet/eudaq/bin
TLUControl.exe -d 14 -a 12
-dXX Mask for DUT:
1 abgeschnittenes Dummykabel
2 EUDRB hinten
4 EUDRB vorne
8 DUT3(wir)
-t100 internal trigger
-aXX Mask for Szintis:
1 4 mm (front)
2 4 mm (front)
4 9 mm (back)
8 9 mm (back) |
|
16
|
Mon Sep 27 18:54:47 2010 |
Thomas Bergauer | BELLE | XY Position | | | | |
center position: 55/40/277,5 |
|
19
|
Tue Sep 28 12:54:33 2010 |
Markus Friedl | BELLE | run | run002 | | 28.09.2010 12:46:54 | |
same as run001 after shifting x by 48mm
103 / 30 / 277.5 ? unsure after crash of xy stage PC |
|
21
|
Tue Sep 28 14:38:24 2010 |
Christian Irmler | BELLE | Temperature sensors Belle stack | | | | |
PicoLogic TC-08 temperature sensor assignment Belle stack:
Sensor type: K
channel 1: Origami_mod1_in
channel 2: Origami_mod1_out
channel 3: Origami_mod2_in
channel 4: Origami_mod2_out
channel 5: Micron_wedge_mod1_p
channel 6: Micron_wedge_mod1_n
channel 7: Micron_wedge_mod2_p
channel 8: Micron_wedge_mod2_n
The cooling pipes of the two Origami modules and that of the Micron modules are connected in series, respectively. |
|
24
|
Tue Sep 28 16:50:31 2010 |
Thomas Bergauer | common | serial connection chiller | | | | |
Der chiller braucht ein gekreuztes serielles Kabel!! |
|
26
|
Tue Sep 28 22:09:39 2010 |
Markus Friedl | BELLE | Temperature sensors Belle stack | | | | |
PicoLogic TC-08 temperature sensor assignment Belle stack:
Sensor type: K
channel 1: Origami_mod1_in
channel 2: Origami_mod1_out
channel 3: Origami_mod2_out (swapped with 4) - label not changed
channel 4: Origami_mod2_in (swapped with 3) - label not changed
channel 5: Micron_wedge_mod1_p
channel 6: Micron_wedge_mod1_n
channel 7: Micron_wedge_mod2_p
channel 8: Micron_wedge_mod2_n
The cooling pipes of the two Origami modules are connected in series, respectively. |
|
38
|
Wed Sep 29 18:53:05 2010 |
Thomas Bergauer | Micron Baby | XY Positions | | | | |
center position: 113/47/7.5
top left (direction jura): 121/53.5/7.5
bottom right (direction saleve): 105/40.5/7.5 |