Home CMS Production Clean room MedAustron HEPHY testbeams old
electronics module assembly SiDDaTA scratch
  HEPHY logbook of the Electronics Group, Page 3 of 4  Not logged in ELOG logo
  ID Date Author Projectdown Measurement Type Object ID Subject
  55   Mon Nov 30 17:23:51 2015 Hao YinBelle IIsystemHardwareRun001 

ADC Hot, FIRRun001, PedestalRun001

room temp pedrun

target: BW

Attachment 1: Room_bw_n.png
Room_bw_n.png
Attachment 2: Room_bw_p.png
Room_bw_p.png
  56   Mon Nov 30 17:47:54 2015 Hao YinBelle IIsystemHardwareRun002 

ADC Hot, FIRRun001, PedestalRun001

target: -Z

room temp pedrun

 

Attachment 1: Room_-z_n.png
Room_-z_n.png
Attachment 2: Room_-z_p.png
Room_-z_p.png
  57   Mon Nov 30 18:32:13 2015 Hao YinBelle IIsystemADC Delay Scan Cold 

ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns)

  58   Mon Nov 30 18:44:04 2015 Hao YinBelle IIsystemFIRRun_Cold 

ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns)

 

  59   Mon Nov 30 18:45:49 2015 Hao YinBelle IIsystemPedestalRun_Cold 

ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001

 

  60   Mon Nov 30 18:49:23 2015 Hao YinBelle IIsystemHardware_Cold 

ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001

target: -Z

 

Attachment 1: Cold_-z_n.png
Cold_-z_n.png
Attachment 2: Cold_-z_p.png
Cold_-z_p.png
  61   Mon Nov 30 19:01:54 2015 Hao YinBelle IIsystemHardware_Cold 

ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001

Temp = 0°C

target: CE

 

Attachment 1: Cold_ce_n.png
Cold_ce_n.png
Attachment 2: Cold_ce_p.png
Cold_ce_p.png
  62   Mon Nov 30 19:48:05 2015 Hao YinBelle IIsystemHardware_Room_With_Cold_I2C 

ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001

with room temp i2c config

Temp = 0°C

target: CE

 

Attachment 1: RoomTemp_with_cold_config_ce_p.png
RoomTemp_with_cold_config_ce_p.png
Attachment 2: RoomTemp_with_cold_config_ce_n.png
RoomTemp_with_cold_config_ce_n.png
  63   Mon Nov 30 20:06:15 2015 Hao YinBelle IIsystemHardware_Room_With_Cold_I2C 

ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001

with room temp i2c config

Temp = room

target: -Z

 

Attachment 1: RoomTemp_with_cold_config_-z_p.png
RoomTemp_with_cold_config_-z_p.png
Attachment 2: RoomTemp_with_cold_config_-z_n.png
RoomTemp_with_cold_config_-z_n.png
  64   Mon Nov 30 20:16:37 2015 Hao YinBelle IIsystemHardware_Room_With_Cold_I2C 

ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001

ADC delay shifted by 3 (1.5ns) all sensors

with room temp i2c config

Temp = room

target: -Z

 

Attachment 1: RoomTemp_with_cold_config_-z_p_3.png
RoomTemp_with_cold_config_-z_p_3.png
Attachment 2: RoomTemp_with_cold_config_-z_n_3.png
RoomTemp_with_cold_config_-z_n_3.png
  65   Mon Nov 30 20:27:42 2015 Hao YinBelle IIsystemHardware_Room_With_Cold_I2C 

ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001

ADC shifted by 5 (2.5ns) all sensors

with room temp i2c config

Temp = room

target: -Z

Note : n-side (strip nr 200 - 220 shadowhits)

Attachment 1: RoomTemp_with_cold_config_-z_p_5.png
RoomTemp_with_cold_config_-z_p_5.png
Attachment 2: RoomTemp_with_cold_config_-z_n_5.png
RoomTemp_with_cold_config_-z_n_5.png
  67   Mon Nov 30 22:35:41 2015 Hao YinBelle IIsystemHardware_Room_With_Cold_I2C 

ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001

ADC shifted by 9 (4.5ns) all sensors

with room temp i2c config

Temp = room

target: -Z

Attachment 1: RoomTemp_with_cold_config_-z_p_9.png
RoomTemp_with_cold_config_-z_p_9.png
Attachment 2: RoomTemp_with_cold_config_-z_n_9.png
RoomTemp_with_cold_config_-z_n_9.png
  5   Wed Apr 30 16:52:17 2008 Markus FriedlBELLE Upgrademodulemicronmicron sensor glued to frame
soeben haben wir den micron-DSSD (double metal layer) in den 2-teiligen rahmen geklebt und auf beiden seiten
temporäre kapton-stückerln aufgeklebt, über die bias appliziert werden kann. nach trocknung und bonden der
bias-verbindungen (montag, 5.5.2008) wird dieser für sensor-tests zur verfügung stehen.
  14   Tue May 20 14:27:50 2008 Markus FriedlBELLE Upgradesourcemicronanalysis results of source test
*** NOTE: AFTER THIS MEASUREMENT WE REALIZED THAT BIASING WAS NOT DONE PROPERLY
          HENCE THE RESULTS BELOW ARE NOT RELIABLE 
          (in fact it is surprising that they are not worse) ***


Please find the results of the lab source test on the new Micron module here.
It is read out with 3 + 3 APV chips on either side.

Results table of the source measurement:
                      p-side     n-side
 Cluster signal [e]    18361      19434
 Strip noise [e]        1142       1193
 Avg cluster width      1.91       1.30
 Single strip SNR       16.1       16.3
 Cluster SNR            11.6       14.3
 Strip pitch [um]       50.0      153.5     

Apparently, the double metal capacitance is not so bad as expected, even though the Micron sensor does not use
the hourglass crossing scheme. Presumably the dielectric between metal 1 and 2 is rather thick (several um).
Strip noise is roughly the same on both p and n side, so the difference in Cluster SNR (*) only stems from the
unequal cluster width (which is a result of the different pitches).

Peak time precision vs SNR (last plot below) is worse compared to the values obtained with various HPK sensors
in the November 2007 beam test at KEK. However, this is a comparison of source and beam and thus might not be
significant. Let's see what we will get in the SPS beam test next week.

(*) Cluster SNR := sum(signal) / (strip_noise * sqrt(cluster_width) )
Attachment 1: vie_micron_run002_signal.gif
vie_micron_run002_signal.gif
Attachment 2: vie_micron_run002_noise.gif
vie_micron_run002_noise.gif
Attachment 3: vie_micron_run002_hit.gif
vie_micron_run002_hit.gif
Attachment 4: vie_micron_run002_clw.gif
vie_micron_run002_clw.gif
Attachment 5: vie_micron_p_run002_tres.gif
vie_micron_p_run002_tres.gif
Attachment 6: vie_micron_n_run002_tres.gif
vie_micron_n_run002_tres.gif
Attachment 7: vie_micron_p_run002_ressnr.gif
vie_micron_p_run002_ressnr.gif
Attachment 8: vie_micron_n_run002_ressnr.gif
vie_micron_n_run002_ressnr.gif
Attachment 9: trms_vs_snr_micron_src.gif
trms_vs_snr_micron_src.gif
  15   Wed Oct 7 14:23:35 2009 Dieter UhlBELLE Upgradehybrid#4hybrid-pitchadapter

opens at upper coat

pitchadapter4_upper_coat_opens.gif

 

shorts at upper coat

pitchadapter4_upper_coat.gif

 

opens at lower coat

pitchadapter4_lower_coat_opens.gif

 

shorts at lower coat

pitchadapter4_lower_coat.gif

  16   Wed Oct 7 14:24:06 2009 Dieter UhlBELLE Upgradehybrid#5hybrid-pitchadapter

shorts at upper coat

pitchadapter5_upper_coat.gif

 

opens at upper coat

pitchadapter5_upper_coat_opens.gif

 

shorts at lower coat

pitchadapter5_lower_coat.gif

 

opens at lower coat

pitchadapter5_lower_coat_opens.gif

  17   Sun Jul 4 05:48:36 2010 Christian IrmlerBELLE UpgradesourceOrigami 6 - module 1run002: first analysis results

Run name: run002

Run type: 0 (Hardware (Normal Run))
Comments:
After ~40min warmup
HV=80
90Sr 1mCi source - moved compared to run001
multi6

Max. Events=100000      Trg delay=25

Origami 6 module #1
w/o cooling
sensor: B2HPK_10938-9239_8

n-side: all 4 APVs read out
p-side: APV #0 to #3  read out, analog output of #4 and #5 were not connected to FADC board

 

 

Attachment 1: run002_cluster_sum.txt
Analysis of run002

Peak Mode, 3 x 200 initevents (first 10 skipped) + 99400 events
Number hybrids:  2	number zones:  2	 number sensors:  1
Using calibration file intcal001
No pedestal correction file
Seed/Neighbor/Cluster/Noisy Strips Cuts [RMS noise]: 5.0/3.0/5.0
Min. hitlength:   3


Comments:
After ~40min warmup
HV=80
90Sr 1mCi source - moved compared to run001
multi6



Analysis date: 04.07.2010 05:40:47


Analysis settings:
 runname: run002_cluster
 clock: 40.00 MHz
 datafilepath: ./
 outputpath: ./
 subevents:  6
 fitmode: 2 (cal. fit)
 options: hr




Results:

ModuleName           ZoneType    Ch    OKCh     OK%   Entries    MClW    MPSignal   Noise   MPSNR   HpSE  Occup SigSlop SigInt SigRes PtiSlop PtiInt  PtiRes ClwSlop ClwInt  ClwRes
Origami6_mod1_p   Orgami 6"    512    512   100.0     34659    1.87    24436.5   3330.4    6.74   0.25   0.80   0.95   0.00  6651.0   1.00   -17.63   7.47    1.00    0.21   0.86
Origami6_mod1_n   Orgami 6"    512    508    99.2     95601    1.93    23801.7    962.7   17.08   1.02   0.79   0.95   0.00  6651.0   1.00   -17.63   7.47    1.00    0.21   0.86




Attachment 2: run002_cluster_noi_0.ps
Attachment 3: run002_cluster_sig_0.ps
Attachment 4: run002_cluster_hit_0.ps
Attachment 5: run002_cluster_hpt_0.ps
Attachment 6: run002_cluster_clw_0.ps
Attachment 7: run002_cluster_cor_0.ps
  37   Tue May 19 09:31:50 2015 Hao Yin   Noise Test ITA

Everything works except L3 p-side.

The config file is shown in the following:

### Original Configuration File Name: /home/katsuro/tuxdaq_devel/config/delay_scan.latency_scan.cfg ###
### Original Configuration File Name: /home/katsuro/tuxdaq_devel/config/delay_scan.updated.cfg ###
#
# This is the default config file for the APV_BELLE software
#
#
# Lines preceded by a # or ; sign are ignored.
#
# [rem] comments a whole section until the next section start marked by [xxx] .
#

[soc]
ena = 0
addr =
port = 9999

# [vme]
# VME addresses are given in the format
#  {module_name} = {vme_module_number},{vme_address_hex}
#  nec ... NECO module
#  adf ... particular FADC module
#
# Please note that the address ranges are not defined here,
# they are implicitly given by the hardware.
# Module numbers must fill from 0 (this is not checked).
# Please note that no range checking is performed.
# There is no access to VME modules that are not included in this list,

[vme]
nec = 0,0xaa000000

# p side
adf = 0,0x01000000
adf = 1,0x81000000
# n side

# [nec]
# NECO related information
#  mod = 0|1,{shift_register_delay},{adc_range},{win_delay},{win_length},{dead_time},{time_lat},{max_trg}
#          (default: 0,75,0,50?,900?,36,2,1)
#  res = {list of entries in reset sequence}                (default: 2,4)
#  cal = {list of entries in cal sequence}            (default: 2,3,250,251)
#  sw5 = {list of entries in single cal sequence}        (default: 2,3)
#  str = {list of entries in software trigger sequence}        (default: 75)
#  htr = {list of entries in hardware trigger sequence}        (default: 74)
#
# mod specifies to use either the sequencer (0) or the shift register (1) for hardware trigger and the
#  delay of the shift register (0..255); adc_range (0=1Vpp, 1=2Vpp) -- ignored; win_delay and win_length define
#  the starting point (relative to the APV trigger) and length of the ADC gate in transparent mode; dead_time is
#  the number of 254MHz clock cycles which are set to zero for time measurement after an incoming trigger;
#  time_lat is the latency for time measurement in terms of 40MHz clock cycles; max_trg is the number of incoming
#  triggers which required to activate the veto logic (usually 1; 0 completely disables the veto logic)
# res, cal, sw5, str and htr are containing the bits to set in the 256-element sequencer memory (nothing is set at -1)
# Please note that cal+str together produce a calibration request plus subsequent normal trigger, so the time
#  between them is the latency. sw5 is used to send a single cal request to achieve the correct polarity in
#  case the APV inverter is turned on (this feature only works for entire MAMBOs halves = groups of 3 REBOs)
#
# These settings are quite fragile! Do not modify until you know exactly what you are doing.

[nec]

# 30m cables, 40mhz, Tp=50ns, single-trigger
#mod = 0,75,0,70,250,36,2,1
#htr = 64,-1,-1,-1,-1,-1,-1,-1
#str = 100,-1,-1,-1,-1,-1,-1,-1

# TESTBEAM Nov 07, 30m cables, 40mhz, Tp=50ns, multi-trigger (6 samples)
# mod = {0:max triggers, 1:latency, 2:software trigger latency, do not care about the rest}
mod = 0,120,250,0,0,0,0,0

stp = 150,-1,-1,-1,-1,-1,-1,-1
stn = 150,-1,-1,-1,-1,-1,-1,-1

#common settings
rep =  2,-1,-1,-1,-1,-1,-1,-1
ren =  2,-1,-1,-1,-1,-1,-1,-1

cap =  2,52,-1,-1,-1,-1,-1,-1
can =  52,250,-1,-1,-1,-1,-1,-1

# location of file to fir filter can be rel. path
[fir]
# enable fir 1 true otherwise false
ena = 0
# path to fir coef file
pat = /mnt/data/LabLadder5/FIR_L5_class_b-_20150429153730.fir

# [daq]
# DAQ related specifications are given in the format
#  ads = {N},{search_max_subevents},0,x
#  ini = {initevents},{readout_mode},0,x
#  deh = {module_position},{apv_position},0,x
#  i2t = {N},0,0,x
#  pat = 0,0,0,{data_file_path}
#  clk = {N},{Delay25 frequency range},0,x
#  pdl = {Trigger input delay},0,0,x
#  crd = {crate_number},{clkdel},{trgdel},x
#
# ads N gives the number of samples that are read out from the FIFO1 in transparent mode, search_max_subevents is the
#  maximum number of subevents to search for within one ADC stream (default=1).
# ini: initevents is the number of software triggers in the beginning of a run for pedestal and noise
# evaluation. At the beginning of each run, 2*initevents are generated by software, after that the
# selected trigger source (hardware, software of calibration) is activated. The initial evaluation
# events are written to disk as normal events are.
# ini: readout_mode defines whether events beyond the initevents are read in raw transparent mode from FIFO1 (0) or
#  in processed mode (1) where only hit information is read from FIFO3
# deh is the APV chip for which single strip histograms are recorded
# i2t is the maximum number of I2C retries in case of failure
# pat specifies the save path for data files (must include a trailing backslash!)
# clk gives the system clock period in integer ns (25 max.) and the frequency range for the Delay25 chip:
#  0...40 MHz, 1...80 MHz, 2...32 MHz, 3...64 MHz
# pdl specifies the delay setting for the trigger input in 0.5ns steps (0..49)
# crd define the global clock and trigger delays between NECO and SVD3_buffer for crates 0 and 1
#  NOTE: clock and trigger is NOT propagated to any crate(s) NOT specified here


[daq]

# TESTBEAM Nov 07
#Standard
#ads = 600,3,0,x

# TESTBEAM Nov 07
#Multitrigger (6)
#~ ads = 940,6,0,x
ads = 250,1,0,x

# RAW (transparent mode) readout
ini = 300,0,0,x

# PROCESSED readout
#ini = 300,1,0,x

deh = 1,0,0,x
i2t = 5,0,0,x
pat = 0,0,0,/mnt/data/LabLadder5

#standard 40mhz clock (25ns)
clk = 25,0,0,x
pdl = 25,0,0,x

#crate distribution delays (set to mid-range to allow adjustments in both directions)
crd = 0,25,25,x

#we don't use crate 1, so we don't set any delay here -> no clock/trigger to crate 1
###crd = 1,25,25,x


# [hit]
# Hit recognition variables are specified here
#  hcs = {hitcut_/home/hao/Desktop/vme_tests/vme_test_caen/Releaseseed_strip},{hitcut_neighbor_strips}
#  nok = {x.x},0
#  
#
# hcs gives seed and neighbor hit cuts in units of strpAPVip sigma
# nok states the threshold over average noise at which strips are excluded from further analysis (to exclude noisy strips)

[hit]
# si sensor
hcs = 5.0,3.0

# do not exclude strips
nok = 2000.0,0


# [cal]
# Calibration related data
#  lvl = {level},0
#  lat = {latbeg},{latend}
#  sam = {average_samples},{number of samples in 6-tuple mode}
#  grp = {number_of_groups},0
#  lg6 = {latency},{group}
#  lv6 = {startlevel},{endlevel}
#
# lvl is the CLVL amplitude (0..255), 1 is 625e-, 36 is 1 MIP (22500e-) nominally, in reality 26 is 1 MIP
# lat is the Latency range to
#~ cover (latend-latbeg>=2, latend-latbeg<=15)
# sam is the number of samples to average per position for normal and 6-tuple modes
# grp is how many groups to scan (<=8), first group is strips 0,8,16,..., second group is 1,9,17,..., ...
# lg6 defines the latency in 6-tuple mode and which group to observe in that mode
# lv6 defines the scan range of amplitude in 6-tuple mode

[cal]
#real 1 MIP level (22400e)
lvl = 26,0

#real 5 MIPs level
#lvl = 130,0/home/hao/Desktop/vme_tests/vme_test_caen/Release

#LAT=95/98 Calibration (short display)
#lat = 89,100

#LAT=95/98 Calibration (short display for >=50mhz)
#lat = 81,98

#LAT=95/98 Calibration (long peak mode tail display)
lat = 75,100

#common settings
sam = 50,150
grp = 8,0

#6-tuple mode settings
lg6 = 97, 1
#lv6 =  1,95
lv6 =  50,52

 


# [i2c]
# This section defines one or more I2C sets for the APV25. In the [mod] section, those sets are referenced to by their number.
#  ia2 = {number},{mode},{lat},{ipre},{ipcasc},{ipsf},{isha},{issf},{ipsp},{imuxin},{vfp},{vfs},{vpsp},{muxgain}
#
# The I2C settings must be individually numbered (ascending from 0). The easiest case is to use the same
# settings for all chips of one type, but one could go so far to use separate settings for each chip.
# vadj/vpsp is set individually for each apv in the [mod] section, the value specified here is meaningless.

[i2c]

# apv25s1, peak, inverter ON, Tp=50ns, (p side)
ia2 = 0, 63, 23, 98, 52, 34, 34, 34, 55, 34, 30, 60, 0, 4

# apv25s1, peak, inverter OFF, Tp=50ns, (n side)
ia2 = 1, 31, 23, 98, 52, 34, 34, 34, 55, 34, 30, 60, 0, 4


# apv25s1, multi-peak, inverter ON, Tp=50ns, (p side)
#~ ia2 =          0,    61,   17,    98,      52,    34,    34,    34,    55,      34,   30,   60,     0,       4

# apv25s1, multi-peak, inverter OFF, Tp=50ns, (n side)
#~ ia2 =          1,    29,   17,    98,      52,    34,    34,    34,    55,      34,   30,   60,     0,       4

# apv25s1, peak, inverter ON, Tp=50ns, (p side), for cooled APV chips, -10C
#~ ia2 =          0,    61,   17,    85,      45,    30,    50,    30,    48,      30,   30,   50,     0,       4

# apv25s1, multi-peak, inverter OFF, Tp=50ns, (n side), for cooled APV chips, -10C
#~ ia2 =          1,    29,   17,    85,      45,    30,    34,    30,    48,      30,   30,   60,     0,       4


# [mod]
# Detector module (actually hybrid) specifications are given in the format
#  mod = {module_position},{crate_number},{fadc_number},{adc_number},{hybrid_number},m,{adc_delay},0,0,0,0,0,0,{Name}
#  apv = {module_position},{apv_position},{i2c_address},{i2c_settings},{vadj/vpsp},x,0,0,{fadc_offset},{fadc_number},{fadc_channel},{fadc_clkdelay [0..49]},{AD8128_gain},x
#
# mod gives the hybrid/module properties: The position counts from 0 to 7 in beam direction,
#  Name must not contain blanks ("_" is allowed).
# apv describes the chips located on a hybrid
#  and the ADC channel where they are read out, either a Vienna ADC (a) or a FED (f).
# The ADC offset is only available with the Vienna ADCs and shifts the baseline.
#~ # The individual chip vadj setting dominates over the [i2c] setting.

# p-side
[mod]
mod = 1,0,0,0,0,m,24,0,0,0,0,0,0,fw_p

apv = 1,0,34,0,30,x,0,0,0,0,0,0,0,x
apv = 1,1,36,0,30,x,0,0,0,0,1,0,0,x
apv = 1,2,38,0,30,x,0,0,0,0,2,0,0,x
apv = 1,3,40,0,30,x,0,0,0,0,3,0,0,x
apv = 1,4,42,0,30,x,0,0,0,0,4,0,0,x
#~ apv = 1,5,44,0,30,x,0,0,0,0,5,0,0,x


[mod]
mod = 2,0,0,1,1,m,38,0,0,0,0,0,0,ce_p

apv = 2,0,34,0,30,x,0,0,0,0,6,0,0,x
apv = 2,1,36,0,30,x,0,0,0,0,7,0,0,x
apv = 2,2,38,0,30,x,0,0,0,0,8,0,0,x
apv = 2,3,40,0,30,x,0,0,0,0,9,0,0,x
apv = 2,4,42,0,30,x,0,0,0,0,10,0,0,x
apv = 2,5,44,0,30,x,0,0,0,0,11,0,0,x

[mod]
mod = 3,0,0,2,2,m,40,0,0,0,0,0,0,-z_p

apv = 3,0,34,0,30,x,0,0,0,0,12,0,0,x
apv = 3,1,36,0,30,x,0,0,0,0,13,0,0,x
apv = 3,2,38,0,30,x,0,0,0,0,14,0,0,x
apv = 3,3,40,0,30,x,0,0,0,0,15,0,0,x
apv = 3,4,42,0,30,x,0,0,0,0,16,0,0,x
apv = 3,5,44,0,30,x,0,0,0,0,17,0,0,x

[mod]
mod = 4,0,0,3,3,m,24,0,0,0,0,0,0,bw_p

apv = 4,0,34,0,30,x,0,0,0,0,18,0,0,x
apv = 4,1,36,0,30,x,0,0,0,0,19,0,0,x
apv = 4,2,38,0,30,x,0,0,0,0,20,0,0,x
apv = 4,3,40,0,30,x,0,0,0,0,21,0,0,x
apv = 4,4,42,0,30,x,0,0,0,0,22,0,0,x
apv = 4,5,44,0,30,x,0,0,0,0,23,0,0,x

[mod]
#~ mod = 5,0,0,4,4,m,24,0,0,0,0,0,0,L3_p

#~ apv = 5,0,34,0,30,x,0,0,0,0,24,0,0,x
#~ apv = 5,1,36,0,30,x,0,0,0,0,25,0,0,x
#~ apv = 5,2,38,0,30,x,0,0,0,0,26,0,0,x
#~ apv = 5,3,40,0,30,x,0,0,0,0,27,0,0,x
#~ apv = 5,4,42,0,30,x,0,0,0,0,28,0,0,x
#~ apv = 5,5,44,0,30,x,0,0,0,0,29,0,0,x

[mod]
mod = 6,0,0,5,5,m,24,0,0,0,0,0,0,L4_p

apv = 6,0,34,0,30,x,0,0,0,0,30,0,0,x
apv = 6,1,36,0,30,x,0,0,0,0,31,0,0,x
apv = 6,2,38,0,30,x,0,0,0,0,32,0,0,x
apv = 6,3,40,0,30,x,0,0,0,0,33,0,0,x
apv = 6,4,42,0,30,x,0,0,0,0,34,0,0,x
apv = 6,5,44,0,30,x,0,0,0,0,35,0,0,x

[mod]
mod = 7,0,0,6,6,m,24,0,0,0,0,0,0,L5_p

apv = 7,0,34,0,30,x,0,0,0,0,36,0,0,x
apv = 7,1,36,0,30,x,0,0,0,0,37,0,0,x
apv = 7,2,38,0,30,x,0,0,0,0,38,0,0,x
apv = 7,3,40,0,30,x,0,0,0,0,39,0,0,x
apv = 7,4,42,0,30,x,0,0,0,0,40,0,0,x
apv = 7,5,44,0,30,x,0,0,0,0,41,0,0,x

[mod]
mod = 8,0,0,7,7,m,24,0,0,0,0,0,0,L6_p

apv = 8,0,34,0,30,x,0,0,0,0,42,0,0,x
apv = 8,1,36,0,30,x,0,0,0,0,43,0,0,x
apv = 8,2,38,0,30,x,0,0,0,0,44,0,0,x
apv = 8,3,40,0,30,x,0,0,0,0,45,0,0,x
apv = 8,4,42,0,30,x,0,0,0,0,46,0,0,x
apv = 8,5,44,0,30,x,0,0,0,0,47,0,0,x

#---------------------------------------------------- n-side
[mod]
mod = 9,0,1,0,0,m,28,0,0,0,0,0,0,fw_n

apv = 9,0,34,1,30,x,0,0,5,1,0,0,0,x
apv = 9,1,36,1,30,x,0,0,5,1,1,0,0,x
apv = 9,2,38,1,30,x,0,0,5,1,2,0,0,x
apv = 9,3,40,1,30,x,0,0,5,1,3,0,0,x

[mod]
mod = 10,0,1,1,1,m,33,0,0,0,0,0,0,ce_n

apv = 10,0,34,1,30,x,0,0,5,1,6,0,0,x
apv = 10,1,36,1,30,x,0,0,5,1,7,0,0,x
apv = 10,2,38,1,30,x,0,0,5,1,8,0,0,x
apv = 10,3,40,1,30,x,0,0,5,1,9,0,0,x

[mod]
mod = 11,0,1,2,2,m,35,0,0,0,0,0,0,-z_n

apv = 11,0,34,1,30,x,0,0,5,1,12,0,0,x
apv = 11,1,36,1,30,x,0,0,5,1,13,0,0,x
apv = 11,2,38,1,30,x,0,0,5,1,14,0,0,x
apv = 11,3,40,1,30,x,0,0,5,1,15,0,0,x

[mod]
mod = 12,0,1,3,3,m,27,0,0,0,0,0,0,bw_n

apv = 12,0,34,1,30,x,0,0,5,1,18,0,0,x
apv = 12,1,36,1,30,x,0,0,5,1,19,0,0,x
apv = 12,2,38,1,30,x,0,0,5,1,20,0,0,x
apv = 12,3,40,1,30,x,0,0,5,1,21,0,0,x

[mod]
mod = 13,0,1,4,4,m,24,0,0,0,0,0,0,L3_n

#~ apv = 13,0,34,0,30,x,0,0,0,1,24,0,0,x
apv = 13,1,36,0,30,x,0,0,0,1,25,0,0,x
apv = 13,2,38,0,30,x,0,0,0,1,26,0,0,x
apv = 13,3,40,0,30,x,0,0,0,1,27,0,0,x
apv = 13,4,42,0,30,x,0,0,0,1,28,0,0,x
#~ apv = 13,5,44,0,30,x,0,0,0,1,29,0,0,x

[mod]
mod = 14,0,1,5,5,m,24,0,0,0,0,0,0,L4_n

apv = 14,0,34,0,30,x,0,0,0,1,30,0,0,x
apv = 14,1,36,0,30,x,0,0,0,1,31,0,0,x
apv = 14,2,38,0,30,x,0,0,0,1,32,0,0,x
apv = 14,3,40,0,30,x,0,0,0,1,33,0,0,x
#~ apv = 14,4,42,0,30,x,0,0,0,1,34,0,0,x
#~ apv = 14,5,44,0,30,x,0,0,0,1,35,0,0,x

[mod]
mod = 15,0,1,6,6,m,24,0,0,0,0,0,0,L5_n

apv = 15,0,34,0,30,x,0,0,0,1,36,0,0,x
apv = 15,1,36,0,30,x,0,0,0,1,37,0,0,x
apv = 15,2,38,0,30,x,0,0,0,1,38,0,0,x
apv = 15,3,40,0,30,x,0,0,0,1,39,0,0,x
#~ apv = 15,4,42,0,30,x,0,0,0,1,40,0,0,x
#~ apv = 15,5,44,0,30,x,0,0,0,1,41,0,0,x

[mod]
mod = 16,0,1,7,7,m,24,0,0,0,0,0,0,L6_n

apv = 16,0,34,0,30,x,0,0,0,1,42,0,0,x
apv = 16,1,36,0,30,x,0,0,0,1,43,0,0,x
apv = 16,2,38,0,30,x,0,0,0,1,44,0,0,x
apv = 16,3,40,0,30,x,0,0,0,1,45,0,0,x
#~ apv = 16,4,42,0,30,x,0,0,0,1,46,0,0,x
#~ apv = 16,5,44,0,30,x,0,0,0,1,47,0,0,x

  38   Tue May 19 10:08:53 2015 Hao Yin   FADC system setup success

3 FADC. All Channel/APV25 running (except L3 n first and last -> not connected (bonding))

n-side: all connectors

p-side: 0x01: 1, 2, 4 and 0x02, 1 with L3 p and L4 p (Telescope)

Possible error: Blue connector cable between FADC and DockBox!!!!

 

Bad channels:

telescope: L5-p 3. APV25,

                  L3-p 0. and 5. APV25

Ladder: all chips working.

  42   Tue May 19 13:42:04 2015 Hao Yin   L6 Noise inJection Setup

Test Nr. 1:

RLC between DockBox and Hybrid (both side).

Preliminary Test on L6, but all other sensors are connected.

A common mode is injected into DCDC converters first into 1.25V next 2.50V and finally both.

The noise source is attached on the cable between the sensor and the dockbox.

Ajusted ADCDelay and FirFilters

Data is saved in folder "L6_RLC_Test"

CHANGED THE LISN RLC BOX(attachment 4):

  • Change from 2 capaciter to ground to 3 capaciter to mass (also from ground to mass)

Final setup with bias (attachment 5)

Attachment 1: P1000702.JPG
P1000702.JPG
Attachment 2: P1000700.JPG
P1000700.JPG
Attachment 3: P1000699.JPG
P1000699.JPG
Attachment 4: P1000703.JPG
P1000703.JPG
Attachment 5: P1000707.JPG
P1000707.JPG
ELOG V3.1.5-fc6679b