Home CMS Production Clean room MedAustron HEPHY testbeams old
testbeam-RD50-DESY-Jul2023 testbeam-RD50-CERN-Oct2022 testbeam-DESY-Oct2017 testbeam-DESY-April2017 testbeam-SPS2015 testbeam-SPS2014 testbeam-DESY14 testbeam-SPS12 testbeam-SPS11 testbeam-SPS10 testbeam-SPS09 testbeam-SPS08 LP-TPC
  Silicon Envelope for the Large Protoype TPC, all entries  Not logged in ELOG logo
ID Date Author Type Subjectdown
  6   Thu Oct 22 08:04:51 2009 Stephan HänselSetupgeometry - silicon envelope

distance si-sledge-front to silicon-Z-center = 23 cm

-> silicon sledge front 35 cm inside from front of TPC-support at a beam position 58 cm from front of TPC-support


CCU119 = 0x77

  • position 7 = I2C16 = SiLC12 -> front X
  • position 1 = I2C17 = SiLC11 -> front Z

CCU123 = 0x7b

  • position 7 = I2C16 = SiLC01 -> back Z
  • position 1 = I2C17 = SiLC02 -> back X
Attachment 1: SiLC_in_front_of_TPC.jpg
SiLC_in_front_of_TPC.jpg
  13   Mon Nov 2 13:59:09 2009 Stephan HänselSetupToDo before data-taking

in hut:

  • plug twisted pair cable from CCUM into PC (Attention - connector contains more pins, look at marks - use the most right pins when you look from the back of the PC))
  • power on CCUM in spacing behind electronic hut
  • switch on opto-electrical converter for FED (on top of PC (switch in the back) and switch on power supply (front))
  • LV on -> 01,30 and 02,60 (two times)
  • HV on -> 200V

T24/1

  • power the scintillators for triggering
  • move envelope into beamline - sledge front to sensor center is 220,5mm

-> switch on the beam

  4   Fri Feb 27 14:03:53 2009 Stephan HänselSetupSetup 3D
Attachment 1: 090227_TPCEnvelope-3D_copy.png
090227_TPCEnvelope-3D_copy.png
  2   Wed Feb 25 09:57:15 2009 Stephan HänselMeasurementsSensor IV-Kurven + CV-Messungen (vor Modulbau)

 

Object ID Vdepl I bei 300V I bei 450V
ILC-6684-01 53 1,96E-07 2,10E-07
ILC-6684-05 53 1,95E-07 2,16E-07
ILC-6684-19 50 1,98E-07 2,21E-07
ILC-6684-23 50 1,74E-07 1,93E-07
ILC-6684-27 55 2,62E-07 2,77E-07
ILC-6684-34 58 2,30E-07 2,56E-07
Attachment 1: IV-Kurven_Sensors.png
IV-Kurven_Sensors.png
  31   Fri Nov 27 12:23:25 2009 Stephan HänselMeasurementsRun 20077 - Pedestal

16196 events

with 2 Micromegas modules

Beam: 5,6 GeV

silicon sledge 35cm inside from TPC-support-front and 36mm above center position

  • -> front Z: 5mm too far inside the gap
  • -> back Z: 5mm too far outside the gap

 

HV: 200V -> 1,2µA

LV:

  • 01,30 / 02,60   //   01.30 / 02.60
  • 0,632 / 1,739   //   0,622 / 1,752

 

 

 

  30   Fri Nov 27 12:22:19 2009 Stephan HänselMeasurementsRun 20075 - Micromegas 817

46196 events (usable: 42433 events)

with 2 Micromegas modules (TPCDAQ stopped at 46195 events)

Beam: 5,6 GeV

silicon sledge 35cm inside from TPC-support-front and 36mm above center position

  • -> front Z: 5mm too far inside the gap
  • -> back Z: 5mm too far outside the gap

rate: 4,1 Hz

HV: 200V -> 1,2µA

LV:

  • 01,30 / 02,60   //   01.30 / 02.60
  • 0,632 / 1,739   //   0,622 / 1,752

 

 

 

Attachment 1: 20075_HitProfile.jpg
20075_HitProfile.jpg
Attachment 2: OneTrackEvents_020075.txt
21
22
23
31
35
42
45
47
48
50
55
57
60
61
63
66
67
68
72
78
79
82
83
87
89
95
96
98
100
103
105
108
109
114
115
117
130
131
134
138
146
150
159
162
163
166
169
175
178
182
183
184
186
188
190
192
193
206
208
210
211
218
222
227
228
232
239
242
247
248
258
259
261
264
265
267
269
270
273
277
278
281
284
285
287
288
289
296
302
307
308
320
323
325
327
333
334
338
342
352
353
354
363
365
367
369
370
372
377
380
381
389
397
401
402
403
407
408
411
415
416
418
421
423
427
431
432
433
437
440
442
446
452
459
461
466
468
470
471
472
481
483
484
486
488
493
494
495
497
503
506
511
513
514
515
516
519
525
526
528
531
542
545
553
561
565
568
571
572
573
576
579
591
600
603
605
609
617
618
623
624
626
630
632
637
640
652
653
654
658
659
660
674
677
681
684
686
691
695
701
705
706
712
714
715
718
724
728
734
736
741
748
757
758
761
762
765
766
768
769
772
777
778
780
781
782
783
785
786
795
797
801
814
816
818
822
831
832
834
842
845
847
848
851
854
856
859
868
873
876
879
880
881
889
890
893
897
905
906
909
914
917
919
924
930
931
935
938
943
957
964
965
969
973
974
976
977
978
986
987
988
992
1002
1008
1016
1019
1020
1025
1026
1038
1040
1042
1045
1047
1049
1051
1052
1053
1055
1066
... 12149 more lines ...
Attachment 3: TwoTrackEvents_020075.txt
126
142
704
751
819
892
1079
1477
1581
1606
1657
2375
2684
2757
2883
2995
3048
3261
3302
3354
3407
3546
3773
3942
4054
4170
4450
4469
4802
5035
5111
5172
5332
5621
5749
5860
6489
6523
6621
6687
7012
7267
7337
8043
8169
8396
8435
8443
8498
8784
8806
8817
9095
9235
9422
9889
10085
10585
10658
10712
10890
10940
11366
11396
11457
11680
11723
11852
12226
12260
12814
12858
12998
13143
13184
13589
13953
13970
14434
14598
14771
14940
15231
15266
15413
15852
15984
16512
17096
17167
17380
18074
18136
18248
19015
19075
19245
19647
19862
19993
20195
20310
20530
20679
20732
20823
20850
21189
21546
21616
21715
22010
22191
22348
22452
22516
22566
22827
23106
23968
24003
24541
24765
24838
24993
25454
25632
25949
26497
26577
26646
26826
26893
27202
27272
27683
27718
28058
28423
28454
28961
29245
29362
29485
29592
29619
29680
29886
30138
30320
30566
30584
30711
30730
30750
30817
30842
30847
31026
31530
31720
31804
31808
31838
32242
32259
32378
32497
32505
32997
33204
33316
33382
33436
33500
33781
34131
34158
34415
34502
34746
34822
34826
34846
34927
35194
35218
35395
35469
35496
35524
36104
36237
36239
36308
36394
36714
36891
37212
37225
37395
37420
37432
37825
37917
38009
38298
38653
38823
38827
38836
39138
39219
39306
39424
39457
39735
39781
39805
39989
40017
40173
41896
  29   Fri Nov 27 12:21:00 2009 Stephan HänselMeasurementsRun 20074 - Micromegas 816

10010 events

with 2 Micromegas modules (TPCDAQ stopped at 10003 events)

Beam: 5,6 GeV

silicon sledge 35cm inside from TPC-support-front and 36mm above center position

  • -> front Z: 5mm too far inside the gap
  • -> back Z: 5mm too far outside the gap

rate: 4,1 Hz

HV: 200V -> 1,2µA

LV:

  • 01,30 / 02,60   //   01.30 / 02.60
  • 0,632 / 1,739   //   0,622 / 1,752

 

 

 

Attachment 1: OneTrackEvents_020074.txt
22
26
31
32
33
36
37
39
40
41
45
46
47
48
49
55
59
66
71
78
80
86
98
102
103
105
108
109
110
111
116
123
124
125
130
135
136
141
145
148
152
156
160
161
164
165
168
169
170
171
179
182
185
186
187
189
191
196
199
200
201
203
206
207
221
223
228
230
233
234
238
243
245
246
247
250
251
253
255
256
258
263
265
270
271
276
283
284
285
287
291
295
297
299
303
306
313
314
315
316
318
319
325
326
328
329
330
331
333
334
336
337
339
346
350
352
356
361
371
373
374
377
381
382
385
388
389
390
392
394
395
397
402
405
406
409
410
411
414
418
419
421
426
429
432
434
438
440
442
447
448
449
450
456
457
462
463
465
470
480
482
484
485
487
488
489
494
497
498
503
507
517
518
520
521
527
529
530
532
533
535
540
546
556
562
564
565
566
568
575
576
582
587
599
600
601
602
605
611
623
625
634
637
639
641
642
643
649
650
655
658
660
663
673
674
675
677
684
692
696
700
701
707
708
714
721
722
724
736
743
744
749
750
752
755
756
759
762
763
766
767
768
769
771
773
776
777
779
780
782
786
789
794
795
796
802
806
812
815
819
821
824
826
828
834
840
843
848
850
856
861
864
870
871
876
879
880
886
887
892
896
897
900
908
909
911
914
926
930
933
940
944
950
953
959
962
963
965
967
968
... 2904 more lines ...
Attachment 2: TwoTrackEvents_020074.txt
106
213
354
552
572
740
884
1474
2283
2598
2654
2783
2851
2893
2985
3326
3834
4191
4194
4204
4370
4584
4713
4944
5126
5380
5719
6021
6145
6578
6609
6612
7032
7061
7133
7169
7243
7262
7301
7378
7537
7595
8105
8132
8176
8273
8439
8468
8533
9289
9430
9467
9561
9673
9946
  28   Thu Nov 5 19:46:15 2009 Stephan HänselMeasurementsRun 20073 - Micromegas 815

10070 events

with 2 Micromegas modules (TPCDAQ stopped at 9864 events)

Beam: 5,6 GeV

silicon sledge 35cm inside from TPC-support-front and 36mm above center position

  • -> front Z: 5mm too far inside the gap
  • -> back Z: 5mm too far outside the gap

 

HV: 200V -> 1,2µA

LV:

  • 01,30 / 02,60   //   01.30 / 02.60
  • 0,632 / 1,739   //   0,622 / 1,752

 

 

 

Attachment 1: OneTrackEvents_020073.txt
31
34
40
42
44
45
46
52
55
56
60
68
69
71
84
87
89
93
99
105
113
117
118
129
130
132
134
136
137
138
143
144
154
158
162
166
167
168
173
174
177
178
183
190
193
197
199
200
205
207
209
213
217
223
224
230
234
235
237
238
239
249
254
256
257
258
259
261
263
275
279
280
284
287
290
291
295
296
298
299
309
311
320
326
331
335
336
337
338
339
340
341
344
354
362
366
367
372
375
378
379
380
381
384
385
393
400
401
404
406
412
419
422
430
431
435
436
444
446
450
453
455
456
463
465
466
469
486
488
491
492
501
505
510
511
523
534
537
538
539
543
545
549
550
554
568
573
574
575
576
577
579
582
584
585
587
588
589
594
595
597
602
603
611
614
616
617
618
623
624
625
627
628
629
634
638
639
646
649
652
656
657
659
660
662
665
674
679
691
693
694
696
701
710
713
717
718
723
725
726
727
730
735
737
741
745
749
750
751
755
757
761
762
765
768
769
772
778
781
783
784
786
788
792
793
794
795
800
801
808
831
832
833
834
835
837
840
847
850
853
856
858
859
863
864
866
867
868
870
875
879
887
889
896
897
899
903
906
910
913
917
918
921
922
925
929
932
935
936
938
949
950
954
955
957
962
963
967
968
973
976
977
980
983
985
987
988
990
991
993
994
995
997
999
1000
1001
1002
1003
1004
1007
... 2904 more lines ...
Attachment 2: TwoTrackEvents_020073.txt
30
57
484
514
677
763
848
1068
1156
1215
1296
1392
1676
2009
2502
2575
2701
2703
2778
3033
3300
3952
3969
4116
4242
4416
4439
4949
4998
5043
5185
5353
5451
5575
5584
5754
5932
6549
6967
7135
7368
7400
7879
7994
8247
8377
8690
8968
9606
9742
9772
9801
9915
9938
  27   Thu Nov 5 19:44:28 2009 Stephan HänselMeasurementsRun 20070 - positionrun

2257 events without Micromegas

Beam: 5,6 GeV

silicon sledge 35cm inside from TPC-support-front and 36mm above center position

  • -> front Z: 5mm too far inside the gap
  • -> back Z: 5mm too far outside the gap

 

 

HV: 200V -> 1,2µA

LV:

  • 01,30 / 02,60   //   01.30 / 02.60
  • 0,632 / 1,739   //   0,622 / 1,752

 

 

 

  26   Thu Nov 5 19:36:48 2009 Stephan HänselMeasurementsRun 20069 - pedestal

13600 events without Micromegas

Beam: 5,6 GeV

silicon sledge 35cm inside from TPC-support-front

HV: 200V -> 1,2µA

LV:

  • 01,30 / 02,60   //   01.30 / 02.60
  • 0,632 / 1,739   //   0,622 / 1,752

 

 

 

  25   Thu Nov 5 19:34:58 2009 Stephan HänselMeasurementsRun 20065 - pedestal

18400 events without Micromegas

Beam: 5,6 GeV

silicon sledge 35cm inside from TPC-support-front

HV: 200V -> 1,2µA

LV:

  • 01,30 / 02,60   //   01.30 / 02.60
  • 0,632 / 1,739   //   0,622 / 1,752

 

 

 

  24   Thu Nov 5 19:33:53 2009 Stephan HänselMeasurementsRun 20064 - pedestal

12199 events without Micromegas

Beam: 5,6 GeV

silicon sledge 35cm inside from TPC-support-front

HV: 100V -> 1µA

LV:

  • 01,30 / 02,60   //   01.30 / 02.60
  • 0,648 / 1,760   //   0,638 / 1,774

 

 

 

  23   Wed Nov 4 18:24:48 2009 Stephan HänselMeasurementsRun 20063 - Micromegas #808

crashed at 18577 events - TPC 19220 events

Beam: 5,6 GeV

one Micromegas module in center position

silicon sledge 35cm inside from TPC-support-front

 

 

HV: 200V -> 2µA

LV:

  • 01,30 / 02,60   //   01.30 / 02.60
  • 0,627 / 1,605   //   0,618 / 1,617

 

 

 

  22   Wed Nov 4 18:19:44 2009 Stephan HänselMeasurementsRun 20062 - data

6493 events without Micromegas

Beam: 5,6 GeV

silicon sledge 35cm inside from TPC-support-front

HV: 200V -> 2µA

LV:

  • 01,30 / 02,60   //   01.30 / 02.60
  • 0,621 / 1,722   //   0,610 / 1,734

 

 

 

  21   Wed Nov 4 17:12:47 2009 Stephan HänselMeasurementsRun 20061 - Latency Scan -> 70

LATENCY IS SET TO 70

spillsize = 500

 

 

 

Beam: 5,6 GeV

silicon sledge 35cm inside from TPC-support-front

HV: 200V -> 2µA

LV:

  • 01,30 / 02,60   //   01.30 / 02.60
  • 0,621 / 1,722   //   0,610 / 1,734

 

 

 

  20   Wed Nov 4 16:31:42 2009 Stephan HänselMeasurementsRun 20059 - Micromegas #807

crashed at 3648 events -> TPC got much more events

Beam: 5,6 GeV

one Micromegas module in center position

silicon sledge 35cm inside from TPC-support-front

HV: 200V -> 2µA

LV:

  • 01,30 / 02,60   //   01.30 / 02.60
  • 0,621 / 1,722   //   0,610 / 1,734

 

 

 

  19   Wed Nov 4 16:12:33 2009 Stephan HänselMeasurementsRun 20057 - Micromegas #806

1076 events

trigger rate 7,25Hz

bx = real trigger number

 

 

HV: 200V -> 2µA

LV:

  • 01,30 / 02,60   //   01.30 / 02.60
  • 0,621 / 1,722   //   0,610 / 1,734

 

 

  18   Wed Nov 4 16:10:24 2009 Stephan HänselMeasurementsRun 20056 - Micromegas #805

10989 events

HV: 200V -> 2µA

LV:

  • 01,30 / 02,60   //   01.30 / 02.60
  • 0,621 / 1,722   //   0,610 / 1,734

trigger rate 7,25Hz

!!!!! in eventfile: time-stamp instead of real trigger number !!!!!

 

 

  16   Wed Nov 4 15:29:00 2009 Stephan HänselMeasurementsRun 20055 - Pedestal
  17   Wed Nov 4 15:31:39 2009 Stephan HänselMeasurementsRun 20055 - Pedestal

15399 triggers

HV: 200V -> 2µA

LV:

  • 01,30 / 02,60   //   01.30 / 02.60
  • 0,621 / 1,722   //   0,610 / 1,734

 

 

  11   Fri Oct 23 08:09:04 2009 Stephan HänselMeasurementsRun 11273 - data

B=0, TPC inbetween but no TPC readout

Beam: 3GeV

silicon position from TPC-support-ring: 

     123: x=center, z=56.5 cm (measuring tape: sledge 35cm inside the gap)

     116: x=center, z=57 cm (measuring tape: sledge 35cm inside the gap)

2 APVs dead:

 

apvlatency = 75 (in fedpmc_silc.xml)

  10   Fri Oct 23 08:02:57 2009 Stephan HänselMeasurementsRun 11271 - position run

B=0, TPC inbetween but no TPC readout

Beam: 3GeV

moved silicon to center position (~58cm from TPC-support-ring)

2 APVs dead:

 

apvlatency = 75 (in fedpmc_silc.xml)

 

2-sensor-module in center

1-sensor-module not exactly in center-position:

     12316 -> move out of the magnet 1,5cm

     11917 -> move out of the magnet 1cm

  9   Fri Oct 23 07:57:01 2009 Stephan HänselMeasurementsRun 11270 - latency scan

B=0, TPC inbetween but no TPC readout

scan from 70 to 120 with 1000 events each

root-diagram -> latency ~ 75

-> set apvlatency in fedpmc_silc.xml to 75

  8   Fri Oct 23 07:52:52 2009 Stephan HänselMeasurementsRun 11269 - Pedestal Run

B=0, TPC inbetween but no TPC readout

  7   Thu Oct 22 11:18:34 2009 Stephan HänselSetupPictures

Photo Gallery

zusätliche Photos:

labeled SiLC in front of TPC

  1   Wed Oct 1 11:42:44 2008 stephan hänselSetupModulkomponenten

MODULE 0

1 Sensor Module (SiLC01):

   Hybrid: TEC_6D.2.1 / 30216662133923

   Sensor: HPK-ILC-6684-01

2 Sensor Module (SiLC02):

   Hybrid: TEC_6D.2.1 / 30216662133993

   Sensor Near: HPK-ILC-6684-19

   Sensor Far: HPK-ILC-6684-05

 

 

MODULE 1

1 Sensor Module (SiLC11b):

   Hybrid: TEC_6D.2.1 / 30216662133904

   Sensor: HPK-ILC-6684-23

2 Sensor Module (SiLC12):

   Hybrid: TEC_6D.2.1 / 30216661605173

   Sensor Near: HPK-ILC-6684-34

   Sensor Far: HPK-ILC-6684-27

 

(OLD - 1 Sensor Module (SiLC11):

   Hybrid: TEC_6D.2.1 / 30216662133922

   Sensor: HPK-ILC-6684-23)

 

  5   Thu Oct 22 08:02:26 2009 Stephan HänselSetupElectronics

HV-Kapton-PIN-assignment

  

CCUM-to-Module Adapter-Cards

CCUM-to-Module Adapter-Cards Pin-assignment (xls)

  

schematic of the adopted readout (A.Dierlamm)

 

TEC-R2-Hybrid

  12   Mon Nov 2 13:22:50 2009 Stephan HänselSetupDAQ

start data-taking:

ssh xxx@bastion.desy.de -X

ssh xdaq@flctpcikhero1.desy.de -X

-

at PC reboot:

  • source xdaq_profile
  • cd scripts
  • ./fedpmc 0  + ctrl C when ready    //initialise the first FED
  • ./fedpmc 1  + ctrl C when ready    //initialise the second FED
  • ./gatecalib     //sets adresses for the TSC + gate
  • ./setdll 3 5     //sets width of the gate

when controllring newly connected

  • source xdaq_profile (if not done before)
  • cd scripts
  • ./ProgramTest.exe -pci -reset     //-> controllring 0x4c90

test of devices:

  • source xdaq_profile (if not done before)
  • cd scripts
  • ./ProgramTest.exe -pci -scanCCU     // searches for CCUs
  • ./ProgramTest.exe -pci -scantrackerdevice     // searches for CCUs and APVs

start xdaq:

  • source xdaq_profile (if not done before)
  • /opt/firefox/firefox & -> http://ikhero2.desy.de:40000     // not working for now
  • ./xdaq.sh -p40000
  • reload firefox

HyperDAQ:

  • -> Control Panel -> Configure Cluster -> load /home/xdaq/xml/peak_silc.xml
    • tick: Configure Cluster
    • -> submit
  • -> view Applications -> Tracker Supervisor:
    • choose run type -> normal
    • tick: TLU in physics Run
    • type spillsize = 20
    • tick: No gate

if xdaq kills itself:

  • rm /tmp/TLUspill.txt

 

 analysis:

  • root:
    • in /Analysis/AC1Analysis-1.4>
    • .L runAna_silc.C
    • runAna(pedestalnumber,runnumber)

get file with number of single events in all 4 sensors + HitProfile

  • root
    • .L readClusterTree_silc.cxx++
    • readClusterTree_silc(event number)

 

 

 

 

 

 

 

 

  14   Tue Nov 3 10:45:01 2009 Stephan HänselSetupBeam On

clear test beam areas:

go to T24 (front area):

  • use (red) key from interlock
  • go into T24 area, close door, use red key in keyhole next to door -> big red light on
  • push the white buttons "Absuche" below the three red "Not Aus" (emergency stop) buttons
  • go back to the door, turn key and keep it turned!
    • open the door, move out and close it again behind you
  • now it is the time to return the key again -> two green lights should go on

go to T24/1 (LPTPC area):

  • use (black) key from interlock
  • go into T24/1 area, close door, use black key in keyhole next to door -> big red light on
  • push the white buttons "Absuche" below the three red "Not Aus" (emergency stop) buttons
  • go back to the door, turn key and keep it turned!
    • open the door, move out and close it again behind you
  • now it is the time to return the key again -> two green lights should go on

power bending magnets:

  • choose beam energy according to list sticked to monitor

get beam:

  • phone Control Room 3500
  • tell them to put the wire into DesyII at the position written in their lock book

open shutter:

  • go back to hut
  • put back the red and black keys into the interlock
  • turn all four keys -> 5 green lights should be on next to each pair of keys
  • open shutter T24 with the button "Beam  Shutter auf" -> bottom green light next to the keys should go out
  • open shutter T24/1 with the button "Beam  Shutter auf" -> bottom green light next to the keys should go out
  • now you should see beam

 -> start data taking

 

 

 

 

 

 

  15   Tue Nov 3 11:18:46 2009 Stephan HänselSetupBeam Off

close shutter:

  • close shutter T24/1 with the button "Beam  Shutter zu" (green) -> bottom green light next to the keys should go on
  • close shutter T24 with the button "Beam  Shutter auf" (green) -> bottom green light next to the keys should go on
  • turn all four keys -> (the top) 4 green lights should go out next to each pair of keys

go to T24/1 (LPTPC area):

  • just open the door -> the two green and the big red lights go out

If you do not need the test beam any more:

  • open door at test beam area T24 -> the two green and the big red lights go out
  • call Control Room 3500
  • switch off bending magnets

  3   Fri Feb 27 13:34:11 2009 Stephan HänselMeasurementsARCs Noise PIoff + channels 2 repair

 

 

 

 Noise Peak Inverter Off

(SiLC11b after repair --- b ... 2nd module with same sensors but different hybrid and PA)

         
  Noise Pioff [ADC*100] optical inspection Noise Pioff [ADC*100]  
  1ADC-count entspricht ca 770 e-   1ADC-count entspricht ca 770 e-  
CHANNEL SiLC01 After Repair Measurement 06

CCU123-16 back Z

repair-action

5 64   142 non
6 65   142 non
7 80   135 non
8 135 good 72 PA-PA rebond
9 80   133 non
10 139 good 77 PA-PA rebond
12 139 good 76 PA-PA rebond
15 73   59 PA-PA rebond
21 145 good 57 PA-PA rebond
73 77   134 non
74 70   135 non
75 137 good 62 ? PA-PA rebond
137 76   137 non
236 76   69 ? PA-PA rebond
281 55   126 non
453 67   118 non
570 63   61 Jakkoo-PA Open
666 64   134 non
668 62   136 non
715 74   144 non
764 67   134 non
765 141 good 66 PA-PA rebond
766 145 good 65 PA-PA rebond
768 136 good 63 PA-PA rebond
         
         
CHANNEL SiLC02      
21 75 Jakkoo-PA Open  

CCU123-17 back X

63 64 PA-SE rebond    
73 81 ?    
91 77 PA-PA rebond    
170 69 ?    
696 72 PA-SE rebond    
704 67 PA-SE rebond    
719 148 SE-SE rebond    
         
         
CHANNEL SiLC11b Measurement 06   CCU119-17 front Z
13 80 Jakkoo-PA Open    
153 62 Jakkoo-PA Open    
415   ? Remove bond -> IV verbesserung    
713   ? Remove bond -> IV verbesserung    
         
         
CHANNEL SiLC12 Measurement 02   CCU119-16 front X
3 68 Jakkoo-PA Open    
128 63 ?    
346 57 APV-PA Open    
523 128 ?    
651 71 Jakkoo-PA Open    
652 72 Jakkoo-PA Open    
653 71 Jakkoo-PA Open    
654 71 Jakkoo-PA Open    
655 71 Jakkoo-PA Open    
675 149 ?    
767 74 ? Jakkoo-PA Open    

 

Attachment 1: NoisePlot.png
NoisePlot.png
ELOG V3.1.5-fc6679b